特征：
使用简单，高度可见，适合管径：节流：1.3-1.5cm，制动：1.3-1.5cm
设计为足够坚固，重量轻
内置不锈钢丝，难以用锯切
广泛适用于所有踏板车，摩托车和ATV
停止尴尬的瀑布 - 不像光盘锁，你不能忘记它的位置，没有弯曲，没有盘污垢或街道污垢
键不需要锁定
扭把握把尺寸从27-38mm
用于前制动杆将防止自行车被推离中心或侧支架
用于后制动杆将保持后轮胎旋转允许松开或重新扭矩离合器螺母当做皮带，离合器和变体维护
装配你的大写锁：
从包装中取出瓶盖，确保钥匙分开，备用钥匙放在安全的地方
打开盖锁并安装适当大小的推动部分，以紧紧抓住节气门
一旦你选择了正确的推动部分，你可以选择将它们粘合到位
通过推动杠杆固定器的底部向前或向后按压杠杆固定器以调整杠杆设置
帽锁可以在没有压力的情况下安装在制动臂上，这仍然固定了旋转把手
如果选择接合前制动器，只需要轻微的压力才能有效
将盖锁放在油门把手和前制动杆上，按下锁定按钮并放松
通过插入钥匙和转动释放按钮解锁大写锁定
从制动杆和自行车把手上拆下

Features:
Simple to use, highly visible, suitable pipe diameter: throttle: 1.3-1.5cm, brake: 1.3-1.5cm
Designed as strong enough and light in weight
Built-in stainless steel wire, difficult to cut with a saw
Widely used for all scooters, motorcycles and ATV
Stop embarrassing falls-unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime
Key not required to lock
Twist grip sizes from 27-38mm
Used on the front brake lever will keep the bike from being pushed off the center or side stand
Used on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt, clutch and variant maintenance
Fitting your caps lock:
Remove caps-lock from packaging, ensure the keys are separated and the spare key is kept in a safe place
Open caps-lock and install appropriate sized pushing part to snugly grip the throttle
Once you have chosen the correct pushing part you may choose to glue them in place
Click the lever retainer forwards or backwards by pushing at the base of it to adjust the lever setting
Caps-lock can be installed with no pressure on the brake arm, this still immobilizes the twist grip
If chosen to engage the front brake you only need light pressure for this to be effective
Place the caps-lock over your throttle grip and front brake lever, push the locking button and relax
Unlock your caps-lock by inserting key and turning button releases
Remove from brake lever and bike grip