Weighting Indicators for Floor/Platform Scale
地板/平台秤的加权指示器
- 介绍：
- 称重指示器T7E采用快速，高精度的A / D转换技术
- 广泛应用于电子平台秤，电子秤秤等更多类似的静态称重系统配备1-4个称重传感器
- 特征：
- 低功耗，提供不同种类的省电模式
- 可选RS232通讯，可选择波特率，记分板接口通过20mA电流回路发送
- 各种称重模式，操作方便
- AC / DC都可用，可在断电期间充电
- 功能：
- 峰值保持功能
- 动物称重功能
- Kg / lb开关功能
- 预置皮重功能
- 高低功能
- 重量累加，累加显示，累加清除功能
- 零载货范围，零点设置（开/手动）量程，零点设置速度可以单独设置
- 电池指示和低电池保护报警
- 参数：
- 输入信号范围：-19mV-19mV
- 称重传感器激励：DC 5V
- 传感器最大连接数：在350Ω时为4
- 传感器连接方式：6线
- 已验证的计数：3000
- 显示6位LED，6个状态指示
- 显示范围：-999999-999999
- 电源：AC 220V，50-60Hz DC内置可充电电池
- Introduction:
- Weighing indicator T7E adopts fast speed, high precision A/D conversion technology
- Widely applied in electronic platform scale, electronic floor scale and more alike static weighing system equipped with 1-4 load cell
- Features:
- Low power consumption, provided with different kinds of power saving mode
- Optional for RS232 communication with selectable baud rate and scoreboard interface sending by 20mA current loop
- Various kind of weighing mode, easy to operate
- AC/DC both available, could be recharged during power off
- Functions:
- Peak hold function
- Animal weighing function
- Kg/lb switch function
- Preset tare weight function
- High-ok-low function
- Weight accumulate, accumulate display, accumulate clear function
- Zero trucking range, Zero setting (switch on/manually) range, speed rate of zero setting could be set separately
- Battery indication and alarm for low battery protection
- Parameters:
- Input signal range: -19mV-19mV
- Load cell excitation: DC 5V
- Maximum connection number of load cell: 4 at 350Ω
- Load cell connection mode: 6 wires
- Verified counts: 3000
- Display 6 digits LED, 6 status indications
- Display range: -999999-999999
- Power supply: AC 220V, 50-60Hz DC built-in rechargeable battery
