300Mbps Wireless N-router with AC Pass Through, Supports AP, Repeater, Router Mode, Extender
300Mbps无线N路由器与AC穿越,支持AP,中继器,路由器模式,扩展器
加入意向
- wn562n3
- Wireless-N AP /路由器与AC通过
- 消除Wi-Fi死区,速度高达2.4GHz 300Mbps
- 双重覆盖您的Wi-Fi轻松
- 支持AP,中继器和路由器模式
- 描述:
- Wi-Fi AP /路由器主要用于在大区域(如工厂,社区和街道)提供免费Wi-Fi服务
- AP /路由器可以采用现有的802.11n无线信号,重复和扩展到更远的距离,其中路由器或接入点到达太远
- AP /路由器支持2.4G无线网络连接,并且可以支持高达300Mbps的2.4GHz传输速度
- 有3dBi外部天线提供更好的无线性能,传输速率,稳定性技术自动避免使用其通道选择功能的信道冲突
- 符合IEEE 802.11 b / g / n标准
- 提高所有WLAN网络的无线覆盖
- 无线速度可达300Mbps
- 2 x 3dBi外置天线提供更好的无线
- 性能:
- 使用WPA2,WPA和WEP(128/64)的最大WLAN安全性
- 提供一个10 / 100Mbps自动协商以太网LAN端口
- 简单的无线安全加密推动WPS按钮
- 具有方便的模式切换,使您可以切换到AP,中继器或路由器
- 用于简单设置的软件向导
- 集成电源插座,允许附加设备接入电源
- 紧凑,壁式插头设计,方便放置
- 天线集成
- 包装:
- 1个Wi-Fi中继器
- 1个RJ-45网络电缆
- 1 x快速安装
- 系统要求:
- 110-230伏插座
- WLAN客户端必须至少支持WPA加密标准。
- WLAN接入点和具有自动IP地址分配(DHCP)的WLAN客户端,
- 转发基于IPv4的协议/地址解析协议
- WLAN接入点的网络名称(SSID)必须设置为可见
- WN562N3
- Wireless-N AP/router with AC pass through
- Eliminate Wi-Fi dead zones, speed up to 2.4GHz 300Mbps
- Double the coverage of your Wi-Fi with ease
- Supports AP, repeater and router mode
- Description:
- Wi-Fi AP/router is mainly used for providing free Wi-Fi service in big area such as factory, community and street
- AP/router can take an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach
- AP/router supports 2.4G wireless network connection, and it can supports 2.4GHz transmission speeds of up to 300Mbps
- Has 3dBi external antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature
- Complies with IEEE 802.11 b/g/n, standards
- Improves wireless coverage in all WLAN networks
- Wireless speed up to 300Mbps
- 2 x 3dBi external antennas providing even better wireless
- Performance:
- Maximum WLAN security with WPA2, WPA and WEP(128/64)
- Provides one 10/100Mbps auto-negotiation Ethernet LAN ports
- Easy wireless security encryption at a push of the WPS button
- Features a convenient mode switch, enabling you switch to AP, repeater or router
- Software wizard for simple setup
- Integrated power socket to allow additional devices access to power
- Compact, wall plug design for convenient placement
- Antennas integrated
- Packing:
- 1 x Wi-Fi repeater
- 1 x RJ-45 networking cable
- 1 x quick installation
- System requirement:
- 110-230-volt socket
- WLAN client must support at least the WPA encryption standard.
- WLAN access point and the WLAN client with automatic IP address assignment (DHCP)
- Forwarding of IPv4-based protocols/address resolution protocol
- Network name (SSID) of the WLAN access point must be set to visible
