橡胶履带规格
短宽橡胶履带（149 * 88 * 28）
尺寸：Width149 * Pitch88 * Links28
链接和长度可以调整
保修：一般使用一年保修
橡胶履带对道路造成的损伤小于钢轨，在软土地上的车辙少于钢轨。
2.拥挤区域的设备受益，橡胶履带噪音低于钢轨。
橡胶履带允许机器以比钢轨更高的速度行驶。
橡胶履带绝缘机和操作者免受振动，使机器使用寿命缩短，减少操作人员的疲劳。
橡胶履带车辆增加的牵引力允许他们拉两倍相同重量的轮式车辆的载荷。
橡胶履带的牵引性能是车轮的两倍，它允许轻型车辆配备橡胶履带，与轮式车辆相同的牵引作业。
1）。连续橡胶履带
2）。常规型或可互换型橡胶履带
3）。保修：一般使用一年保修
4）。常规和可互换型
5）。欢迎OEM订单的完整轨道系统
6）。提供各种标准橡胶履带系统
7）。运输和基地可用于各种机械
8）。应用：小型挖掘机，推土机，自卸车，履带式装载机，履带式起重机，履带车，
农业机械，摊铺机等专用机械
9）。保修期：12个月
10）。认证：ISO9001：2000
橡胶履带的安装
A.强度过小：容易引起跳跃的牙齿，骑马或引导轮和支撑轮的转向故障，并导致轨道脱轨或逃逸。
B.强度过大：履带钢丝在拉伸过程中会由于过大的应变拉伸而变形，这样会使桨距发生变化，并跟踪铁芯和驱动轮异常磨损，也会使齿轮接触和轨道断裂，机器功率损耗较大，轨道磨损加剧，带裂纹更容易，轨道寿命更短。轨道紧张后，最大下垂距离为10-15mm，正如下方所示。
2.注意
为了延长橡胶履带的使用寿命，请完成以下工作：
A.不要急于在混凝土地板，砂石路或硬道路上紧急转动，以免加速橡胶履带的磨损，扭曲和破裂。
B.尽量不要在腐烂的地方工作，避免橡胶履带滑动和磨损。
C.当石块或其他物体进入履带和底盘时，立即停止，并清除砾石或障碍物。
警告
A.不要在充满石块，棘石，废铁等物体的路上行驶。
B.不要在河流，河流，海岸或任何坚固的道路上行驶。
C.不要使轨道无效登陆。
D.禁止积极驾驶。
避免快速转弯，请慢下来，逐渐转身。

Specifications of rubber track
Short Width Rubber Tracks (149*88*28)
Size:Width149*Pitch88*Links28
Link and lenght can be adjustable
Warranty:Guarantee one year under normal use
1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks.
2. A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks.
3. Rubber tracks permit machines to travel at a higher speed than steel tracks.
4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of machine and decreasing operator's fatigue.
5. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
6. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.
1). Continuous rubber track
2). Conventional type or interchangeable type rubber track
3). Warranty: Guarantee one year under normal use
4). Conventional and interchangeable type
5). OEM orders of complete track systems are welcome
6). Comprehensive range of standard rubber crawler track systems are available
7). Undercarriages and bases are available for a wide range of machinery
8). Application: Mini-excavator, bulldozer, dumper, crawler loader, crawler crane, crawler carrier vehicle,
Agriculture machinery, paver and other special machine
9). Warranty: 12 months
10). Certification: ISO9001: 2000
1. Installation of the Rubber Tracks
A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the guide wheels and supporting wheels and leads to track derailment or escapes.
B. Too large strength: Track wire will be deformed at the elongation by the excessive strain tensile, which will make the pitch changed, and track core iron and the drive wheels abnormally worn, also will make teeth touched and the track broken, the machine power loss larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track is strained, the maximum sag distance is 10-15mm, just as the pitch below.
2. Attention
In order to extend the life of rubber tracks, please complete the following work:
A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to avoid speeding up the wearing, twisting and chapping of the rubber track.
B. Try not to work in the rotten field, to avoid rubber track skid and wear.
C. When the stones or other objects come into the crawler and chassis, stop immediately, and clear gravels or obstacles.
3. Warns
A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.
B. Do not drive in the rivers, streams and on the seacast or any rugged road.
C. Do not make the track unilaterial landing.
D. Forbid aggressive driving.
E. Avoid making a turn rapidly, please slow down and make a turn gradually.