产品手册：
BC1000基本燃烧过程控制器
BC1000用于大型商业和工业火焰燃烧装置开关。
它具有较低的功能：
1.简单的火焰开关功能，表示有无火焰。
2.燃烧安全控制器，系统可提供“安全启动检查”和火焰监测功能内置安全检查启动电路，启动火焰探测器以检测同事是否正常工作（当终端通电时）。如果此时显示有火焰，则不会打开安全继电器，因此当控制器给出启动信号时系统不会启动。 BC1000连接到火焰离子化棒或Honeywell UV探头（C7035A1064，C7027A1049）。
紧凑，通过插入式底座，使用轨道安装，易于安装
三个LED指示灯，表示三种状态：电源，火灾，安全检测启动（SSC）
火焰强度可以在终端前测量，或连续测量监控。
model bc1000a0220u bc1000a0220f bc1000a0110u bc1000a0110f
火灾探测型C7027A1049 / C7035A1064离子棒C7027A1049 / C7035A1064离子棒
工作电压220V 220V 110V 110V

Product manual:
BC1000 basic combustion process controller
BC1000 is used in large commercial and industrial flame combustion device switches on.
It has a lower function:
1. Simple flame switch function, which indicates the presence or absence of flame.
2. Combustion safety controller, the system can provide 'safe start check' and flame monitoring function built-in security checks starting circuit for starting the flame detector to detect whether a colleague is working properly (when the terminal was powered up). If at this time showed the presence of a flame, it will not turn on the safety relay, so the system will not be started when the controller to give the start signal. BC1000 to be connected to a flame ionization rod or Honeywell UV probe (C7035A1064, C7027A1049).
Compact, by way of plug-in base, using the track to install, easy to install
Three LED indicators, representing three states: power, fire, safety detection start (SSC)
Flame intensity can be measured in front of the terminal, or continuous measurement monitoring.
Model BC1000A0220U BC1000A0220F BC1000A0110U BC1000A0110F
Fire detection type C7027A1049/C7035A1064 ion bar C7027A1049/C7035A1064 ion bar
Operating voltage 220V 220V 110V 110V