Full Color Chip SMD LED with -40 to +85°C Operating Temperature Range
全色芯片SMD LED，工作温度范围为-40至+ 85°C
议价
加入意向- 绝对最大额定值：Ta = 25
- 超红：78mW
- 功耗（PD）：纯绿色：100
- 蓝色：100
- 超红：80mA
- 峰值正向电流（1/10占空比，0.1ms脉冲宽度）IFPpure绿色：100
- 蓝色：100
- 超红：30mA
- 连续正向电流：（IF）纯绿色：25
- 蓝色：25
- 反向电压：（VR）5V
- 超红：2,000V
- 静电放电：（ESD）纯绿色：1000
- 蓝色：1,000
- 工作温度范围：（Topr）-40至+85
- 存储温度范围：（Tstg）-40至+100
- 焊接温度：（Tsld）260 5秒
- 电光学特性：（Ta）= 25
- 超红：250,350mcd IF = 20mA（注1）
- 发光强度：（IV）纯绿色：300,500
- 蓝色：120,170
- 超红：100（Deg）IF = 20mA（注2）
- 视角：2θ1/ 2
- 纯绿色：100
- 蓝色：100
- 超红：632nm IF = 20mA（峰值测量）
- 峰值发射波长：»p
- 纯绿色：518
- 蓝色：468
- 超红：624nm IF = 20mA（注3）
- 主波长：d
- 纯绿色：523
- 蓝色：470
- 超红：20nm IF = 20mA
- 光谱线半宽：³»
- 纯绿色：35
- 蓝色：25
- 超红：1.60,2.20,2.60V IF = 20mA
- 正向电压：（VF）
- 纯绿色：2.80,3.50和4.00
- 蓝色：2.80,3.50和4.00
- 超红：10¼AVR = 5V
- 反向电流：IR
- 纯绿色：50
- 蓝色：50
- 笔记：
- 使用近似于CIE眼睛响应曲线的光传感器和滤光器组合来测量发光强度
- ¸1/ 2是发光强度是轴向发光强度一半的离轴角度
- 主波长（»d）源自CIE色度图并且表示定义器件颜色的单一波长
- Absolute maximum ratings: Ta = 25
- Ultra red: 78mW
- Power dissipation (PD): pure green: 100
- Blue: 100
- Ultra red: 80mA
- Peak forward current (1/10 duty cycle, 0.1ms pulse width) IFPpure green: 100
- Blue: 100
- Ultra red: 30mA
- Continuous forward current: (IF) pure green: 25
- Blue: 25
- Reverse voltage: (VR) 5V
- Ultra red: 2,000V
- Electrostatic discharge: (ESD) pure green: 1,000
- Blue: 1,000
- Operating temperature range: (Topr) -40 to +85
- Storage temperature range: (Tstg) -40 to +100
- Soldering temperature: (Tsld) 260 for 5 seconds
- Electrical optical characteristics: (Ta) = 25
- Ultra red: 250, 350mcd IF = 20mA (note 1)
- Luminous intensity: (IV) pure green: 300,500
- Blue: 120, 170
- Ultra red: 100 (Deg) IF=20mA (note 2)
- Viewing angle: 2¸1/2
- Pure green: 100
- Blue: 100
- Ultra red: 632nm IF=20mA (measurement at peak)
- Peak emission wavelength: »p
- Pure green: 518
- Blue: 468
- Ultra red: 624nm IF=20mA (note 3)
- Dominant wavelength: »d
- Pure green: 523
- Blue: 470
- Ultra red: 20nm IF=20mA
- Spectral line half-width: ³»
- Pure green: 35
- Blue: 25
- Ultra red: 1.60, 2.20, 2.60V IF=20mA
- Forward voltage: (VF)
- Pure green: 2.80, 3.50, and 4.00
- Blue: 2.80, 3.50, and 4.00
- Ultra red: 10¼A VR=5V
- Reverse current: IR
- Pure green: 50
- Blue: 50
- Notes:
- Luminous intensity is measured with a light sensor and filtercombination that approximates the CIE eye-response curve
- ¸1/2 is the off-axis angle at which the luminousintensity is half the axial luminous intensity
- The dominant wavelength (»d) is derived from the CIEchromaticity diagram and represents the single wavelength whichdefines the color of the device
