LED Strip Light IP65 with UL CE ROHS, 3528/5050 digital ribbon
LED Strip Light IP65,带UL CE ROHS,3528/5050数字色带
加入意向
LED灯条IP65,配有UL CE ROHS,3528/5050数字色带
sc-did / wid
DigiRibbontm
LED灯条的特点:
它可以实现各种多样的变化模式与相应的控制器,LED类型是5050 RGB LED,并可以每3个LED切割条。与LPD6803相比,它具有更好的性能和更可靠的质量。
LED灯条的应用:
对于建筑物,风景,党,公平,显示,KTV,酒吧,酒吧和节日
仪式,时尚显示,室内或室外照明。
控制模式
TM1803采用归零码单控制方法如下。如果您需要更多的技术支持,请与我们联系。
操作指南:
1将条带的连接器连接到控制器的输出,然后给控制器通电。
2连接多个条带时,将附加条带的输入连接到最后一个输出,然后使用另一个DC12V电源为此附加条带充电。请注意,在所有条带连接之前,您应该对控制器通电。
3如果要进行裸线连接,请观察导线的颜色,同色的导线应用胶带粘接和绝缘。 | 型号 | 颜色 | 芯片 | 长度 (m) | LED Q'ty | led型 | 光输出 (流明/ m) | 光束角度 (度) |
| sc-did-rgb1109-5v | rgb | lpd1109 | 5 | 150 | 5050 smd LED | 630 | 120 |
| sc-wid-rgb-6803 | rgb | lpd6803 | 5 | 150 | 5050 smd LED | 630 | 120 |
| sc-did-rgb-16716 | rgb | sm16716 | 5 | 150 | 5050 smd LED | 630 | 120 |
| sc-did-rgb1803-24-1c | rgb | tm1803 | 5 | 300 | 3528 smd LED | 1250 | 120 |
| sc-did-rgb1803-5v-01 | rgb | tm1803 | 5 | 150 | 5050 smd LED | 630 | 120 |
| sc-did2-rgb1803-0 | rgb | tm1803 | 5 | 300 | 3528 smd LED | 1250 | 120 |
| sc-wid-rgb-02-1803 | rgb | tm1803 | 5 | 150 | 5050 smd LED | 630 | 120 |
| sc-did-rgb-1803-24-5d | rgb | tm1803 | 5 | 300 | 5050 smd LED | 1250 | 120 |
| sc-wid-rgb-16716 | rgb | sm16716 | 5 | 150 | 5050 smd LED | 630 | 120 |
LED Strip Light IP65 with UL CE ROHS,3528/5050 digital ribbon
SC-DID/WID
DigiRibbonTM
Features of the led strip light:
It can realize various colorful changing patterns with corresponding controller, the LED type is 5050 RGB LED, and the strip can be cut every 3 LEDs. Compared to LPD6803 strip, it' s of better performance and more reliable quality.
Applications of the led strip light:
For buildings,landscapes,party,fair,show,KTV,pubs,bars,and for festival
ceremonies,fashion display,and indoor or outdoor lighting.
Control Mode
TM1803 adopt the return-to-zero code single l ine control l ing method as below. If you want more technical support, please contact us.
Operation Guide:
1Connect the connector of the strip to the output of the control ler, then electrify the control ler.
2When connect more than one strips, connect the input of the additional strip to the last output, and electrify this additional strip with another DC12V power supply. Please note that you should electrify the control ler before all strips is wel l connected.
3If you want to do bare-line connection, please watch the color of the wires, wires with same color should be bonded and insulated with tape. | Model Number | Color | Chip | Length (m) | LED Q' ty | LED Type | Light Output (lumen/m) | Beam Angle (degrees) |
| SC-DID-RGB1109-5V | RGB | LPD1109 | 5 | 150 | 5050 SMD LED | 630 | 120 |
| SC-WID-RGB-6803 | RGB | LPD6803 | 5 | 150 | 5050 SMD LED | 630 | 120 |
| SC-DID-RGB-16716 | RGB | SM16716 | 5 | 150 | 5050 SMD LED | 630 | 120 |
| SC-DID-RGB1803-24-1C | RGB | TM1803 | 5 | 300 | 3528 SMD LED | 1250 | 120 |
| SC-DID-RGB1803-5V-01 | RGB | TM1803 | 5 | 150 | 5050 SMD LED | 630 | 120 |
| SC-DID2-RGB1803-0 | RGB | TM1803 | 5 | 300 | 3528 SMD LED | 1250 | 120 |
| SC-WID-RGB-02-1803 | RGB | TM1803 | 5 | 150 | 5050 SMD LED | 630 | 120 |
| SC-DID-RGB-1803-24-5D | RGB | TM1803 | 5 | 300 | 5050 SMD LED | 1250 | 120 |
| SC-WID-RGB-16716 | RGB | SM16716 | 5 | 150 | 5050 SMD LED | 630 | 120 |







