50W PIR LED Floodlight with CE Mark, PF﹥=0.95, IP65, Aluminum Housing, 110lm/W Luminous Efficiency

50W PIR LED Floodlight with CE Mark, PF﹥=0.95, IP65, Aluminum Housing, 110lm/W Luminous Efficiency

50W PIR LED泛光灯，带CE标志，PF> = 0.95，IP65，铝外壳，110lm / W发光效率

议价

加入意向
  • 功率：50W
  • 电源：85-265V AC或12-24V DC
  • 功率因数（PF）：≥0.95
  • 使用寿命：≥50,000小时
  • 显色指数：≥75Ra
  • 工作温度：-55- + 60°C
  • 防水率：IP65
  • 光束角：120°
  • LED芯片：
    • Bridgelux：45×45-mil：110lm / W
    • Epistar：35×35-mil：85lm / W
  • 色温：
    • 暖白色：2,700-3,200K
    • 日光白色：3,500-5,000K
    • 白色：5,500-7,000K
    • 冷白色：8,000-10,000K
  • 材料：铝外壳
  • 产品尺寸：28.5 x 23 x 17厘米
  • 包装：8件/箱
优点：
  • 首先，每个LED泛光灯由3个主要部件组成，LED芯片，LED驱动器和灯壳，99％的照明厂家从LED芯片厂和灯罩厂购买灯壳和LED芯片，我们可以自己生产驱动器
  • 只有5％的照明工厂可以自己生产LED驱动器，所以在相同的质量，我们的价格将比我们的竞争对手低95％
  • 其次，我们的LED泛光灯的功率因数> 0.95
  • 但我们的竞争对手只能使功率因数> 0.5
  • 电源工厂对电子节能非常重要，我们的LED泛光灯功率因数> 0.95，这意味着我们的LED泛光灯可以传输95％的电子能量作为照明，但我们的竞争对手只能传输50％
  • 我们开发和出口LED驱动器超过10年
  • 这就是为什么可以使功率因数> 0.95，其他照明工厂只能使功率因数> 0.5
  • 第三，我们的LED泛光灯的所有螺丝都是不锈钢的
  • 可以使用很长时间，但其他工厂使用铁螺丝
  • 经过很长时间后
  • 铁螺丝很快被天气破坏
  • 第四，我们的LED泛光灯的所有电缆都是硅胶线，其他工厂只使用PC电缆
  • 当天气温度高于+ 40℃或低于-10℃时
  • PC电缆将被制动，但我们的硅胶电缆可以在以下温度下工作：-55 - + 60℃
  • 我们有国际标准的高低温试验设备进行试验
  • 第五，我们为客户提供真正的瓦特
  • 有些工厂使用坏芯片，例如使用20W灯罩
  • 但芯片只有15W
  • 前景相同的20W LED泛光灯，但实际上它只是w / 15W LED芯片
  • 我们从一些我们的客户知道谁从其他LED照明工厂进口LED泛光灯的问题
  • 第六，我们给你真正优质的驱动器零件，LED泛光灯最多的进口备件是LED驱动器，因为LED驱动器内部有许多小型，高科技的备件，但客户不容易看到







  • Power: 50W
  • Power supply: 85-265V AC or 12-24V DC
  • Power factor (PF): ≥0.95
  • Lifespan: ≥50,000 hours
  • Color rendering index: ≥75Ra
  • Working temperatures: -55-+60°C
  • Waterproof rate: IP65
  • Beam angle: 120°
  • LED chips:
    • Bridgelux: 45 x 45-mil: 110lm/W
    • Epistar: 35 x 35-mil: 85lm/W
  • Color temperature:
    • Warm white: 2,700-3,200K
    • Daylight white: 3,500-5,000K
    • White: 5,500-7,000K
    • Cool white: 8,000-10,000K
  • Material: aluminum housing
  • Product size: 28.5 x 23 x 17cm
  • Packing: 8 pieces/carton
Advantages:
  • Firstly, each LED floodlight is consisted with 3 main parts, LED chip, LED driver & lamp housing, 99% lighting factory buy the Lamp housing & LED chip from the LED chip factory & lamp housing factory, we can produce the driver by ourselves
  • Just 5% lighting factory can produce the LED driver by themselves, so under the same quality, our price will be 95% lower than our competitor
  • Secondly power factor of our LED floodlight is ﹥0.95
  • But our competitor just can make the power factor ﹥0.5
  • Power factory is very important for electronic energy-saving, our LED floodlight power factor ﹥0.95 that means our LED floodlights can transfer 95% electronic energy as lighting, but our competitor just can transfer 50%
  • We developing and exporting LED drivers more than 10 years
  • That's why can make the power factor ﹥0.95, other lighting factories just can make power factor ﹥0.5
  • Thirdly, all the screws of our LED floodlights is stainless
  • Can use long time, but other factories use the iron screws
  • After a long time later
  • The iron screws are quickly destroyed by the weather
  • Fourthly, all the cables of our LED floodlights are silicone wire, the other factories just use PC cable
  • When the weather temperature more than +40℃ or below -10℃
  • The PC cables will be braked, but our silicone cables can work under that temperature: -55 - +60℃
  • We have the International standard high & low-temperature test equipment to test it
  • Fifthly, we supply our customers' a real watts
  • Some factories use bad chip, for example use 20W lamp housing
  • But the chip is just 15W
  • The outlook same at 20W LED floodlights, but actually it is just w/15W LED chips
  • The problem we know from some of our customers' who imported LED floodlights from other LED lighting factories before
  • Sixthly we give you real good quality driver spare parts, the most import spare parts of LED floodlight is the LED driver, because LED drivers inside w/many small, high-technology spare parts, but customers' not easy to see the