Professional Surface Roughness Tester, SRT-6200

Professional Surface Roughness Tester, SRT-6200

专业表面粗糙度测试仪，SRT-6200

660-712 USD

加入意向
  • 特征：
    • 本仪器符合ISO，DIN，ANSI，JIS四个标准，广泛应用于生产现场，测量各种机械加工零件的表面粗糙度，根据选定的测量条件计算相应的参数，并清晰显示所有测量参数
    • 当测量表面的粗糙度时，将传感器放置在表面上，然后通过驱动测试仪内部的机构沿表面均匀滑动
    • 传感器通过尖锐的内置探头获得表面粗糙度
    • 这种粗糙度引起探针的位移，这导致感应线圈的感应量的变化，从而产生与相敏整流器的输出端处的表面粗糙度成比例的模拟信号
    • 专用DSP处理和计算，然后在LCD上输出测量结果
    • 非常容易操作
    • 多参数测量：Ra，Rz
    • 高度复杂的电感传感器
    • 内置锂离子充电电池和大容量的控制电路
    • 体积小，重量轻，使用方便
    • 可通过可选电缆和RS232C接口软件与PC计算机进行统计，打印和分析
    • 手动或自动关机
  • 产品规格：
    • 显示：4位数，10 mm液晶显示屏，蓝色背光
    • 参数：Ra，Rz
    • 显示范围：
      • Ra：0.05-10.00μm/1.000-400μm
      • Rz：0.020-100.0μm/0.780-4000μm
    • 精度：不大于10％
    • 显示值波动：不大于6％
    • 传感器：
      • 测试原理：电感型
      • 探针半径：10um
      • 探针材料：金刚石
    • 探头测量力：16mN（1.6gf）
    • 探头角度：90°
    • 导向头垂直半径：48mm
    • 最大行程：17.5mm / 0.7英寸
    • 截止长度（l）：0.25mm / 0.8mm / 2.5mm可选
    • 评估长度：1-5切断可选
    • 行车速度：
      • 采样长度= 0.25mm Vt = 0.135mm / s
      • 采样长度= 0.8mm Vt = 0.5mm / s
      • 采样长度= 2.5mm Vt = 1mm / s
      • 返回Vt = 1mm / s
    • 分辨率：0.001μm如果读数 <10μm, 0.01μm if 10μm≤reading<100μm, 0.1μm if reading ≥100μm
    • 电源锂离子电池：可充电
    • 工作条件：
      • 温度：0-50℃
      • 湿度： <80%
    • 尺寸：140x57x48mm（5.5x2.2x1.9英寸）
    • 重量：约420g
  • 可选部件：
    1. RS232C软件和电缆
    2. 延长杆
    3. 测量台


  • Features:
    • This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters
    • When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester
    • The sensor gets the surface roughness by the sharp built-in probe
    • This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier
    • The exclusive DSP processes and calculates and then outputs the measurement results on LCD
    • Very easy to operate
    • Multiple parameter measurement: Ra, Rz
    • Highly sophisticated inductance sensor
    • Built-in lithium ion rechargeable battery and control circuit with high capacity
    • Small in size, light in weight and easy to use
    • Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface
    • Manual or automatic shutdown
  • Specifications:
    • Display: 4 digits, 10 mm LCD, with blue backlight
    • Parameters: Ra, Rz
    • Display range:
      • Ra: 0.05-10.00um/1.000-400.0uinch
      • Rz: 0.020-100.0um/0.780-4000uinch
    • Accuracy: not more than 10%
    • Fluctuation of display value: not more than 6%
    • Sensor:
      • Test principle: inductance type
      • Radius of probe pin: 10um
      • Material of probe pin: diamond
    • Measurement force of probe: 16mN(1.6gf)
    • Probe angle: 90°
    • Vertical radius of guiding head: 48mm
    • Maximum driving stroke: 17.5mm/0.7-inch
    • Cutoff length (l): 0.25mm/0.8mm/2.5mm optional
    • Evaluation length: 1-5 cut off optional
    • Driving speed:
      • Sampling length = 0.25mm Vt=0.135mm/s
      • Sampling length = 0.8mm Vt=0.5mm/s
      • Sampling length = 2.5mm Vt=1mm/s
      • Returning Vt=1mm/s
    • Resolution: 0.001μm if reading <10μm, 0.01μm if 10μm≤reading<100μm, 0.1μm if reading ≥100μm
    • Power Li-ion battery: rechargeable
    • Operating condition:
      • Temperatures: 0-50°C
      • Humidity: <80%
    • Size: 140x57x48mm (5.5x2.2x1.9 inches)
    • Weight: about 420g
  • Optional parts:
    1. Software and cable for RS232C
    2. Extension rod
    3. Measurement stand