Coating Thickness Meter, Can be Used Both in the Laboratory and in Harsh Field Conditions

Coating Thickness Meter, Can be Used Both in the Laboratory and in Harsh Field Conditions

涂层厚度计，可用于实验室和苛刻条件下

215-236 USD

加入意向
  1. 特征：
    • 它符合ISO 2178和ISO 2361以及DIN，ASTM和BS的标准，可以在实验室和恶劣的现场条件下使用
    • F探头测量在磁性材料（例如铁，镍等）上的非磁性材料（例如油漆，塑料，瓷搪瓷，铜，锌，铝，铬等）的厚度，通常用于测量厚度镀锌层，漆层，瓷釉层，磷化层，铜瓦，铝瓦，部分合金瓦，纸等
    • N探头测量非磁性金属上的非磁性涂层的厚度，它用于阳极氧化，清漆，油漆，搪瓷，塑料涂层，粉末等，应用于铝，黄铜，非磁性不锈钢等
    • 自动衬底识别
    • 手动或自动关机
    • 两种测量模式：单次和连续
    • 宽测量范围和高分辨率
    • 公制/英制转换
    • 数字背光显示屏提供准确的读数，没有猜测或错误
    • 可以与PC计算机通信，以便通过可选电缆进行统计和打印
    • 可存储99组测量
    • 统计数据可用
  2. 产品规格：
    • 显示：4位LCD，背光
    • 范围：0〜1250μm/ 0〜50mil（可指定其他量程）
    • 最小半径工件：
      • F：凸1.5mm /凹25mm
      • N：凸3mm /凹50mm
    • 最小测量面积：6mm
    • 最小样品厚度：0.3mm
    • 分辨率：0.1μm（0〜99.9μm），1μm（100μm以上）
    • 精度：±1〜3％n或2.5μm或0.1mil（以较大者为准）
    • 电池指示灯：低电量指示灯
    • PC接口：带RS-232C接口
    • 电源：2x1.5 AAA（UM-4）电池
    • 工作条件：温度0〜50℃
    • 湿度： <95%
    • 尺寸：126x65x35mm，5.0x2.6x1.6英寸
    • 重量：约81g（不含电池）
  3. 标准配件：
    • 手提箱：1pc
    • 操作手册：1pc
    • F探头内置：1pc
    • NF探针内置：1pc
    • 校准箔：1套
    • 基材（铁）：1pc

  1. Features:
    • It meets the standards of both ISO 2178 and ISO 2361 as well as DIN, ASTM and BS, it can be used both in the laboratory and in harsh field conditions
    • The F probes measure the thickness of non-magnetic materials (such as paint, plastic, porcelain enamel, copper, zinc, aluminum, chrome and more) on magnetic materials (such as iron, nickel and more), often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper and more
    • The N probes measure the thickness of non-magnetic coatings on non-magnetic metals, it is used on anodizing, varnish, paint, enamel, plastic coatings, powder and more, applied to aluminum, brass, non-magnetic stainless steel and more
    • Automatic substrate recognition
    • Manual or automatic shut down
    • Two measurement mode: single and continuous
    • Wide measuring range and high resolution
    • Metric/Imperial conversion
    • Digital backlit display gives exact reading with no guessing or errors
    • Can communicate with PC computer for statistics and printing by the optional cable
    • Can store 99 groups of measurements
    • Statistics is available
  2. Specifications:
    • Display: 4 digits LCD, backlight
    • Range: 0~1250μm/0~50mil (other ranges can be specified)
    • Minimum radius work piece:
      • F: convex 1.5mm/concave 25mm
      • N: convex 3mm/concave 50mm
    • Minimum measuring area: 6mm
    • Minimum sample thickness: 0.3mm
    • Resolution: 0.1μm (0~99.9μm), 1μm (over 100μm)
    • Accuracy: ±1~3%n or 2.5μm or 0.1mil (whichever is the greater)
    • Battery indicator: low batter indicator
    • PC interface: with RS-232C interface
    • Power supply: 2x1.5 AAA (UM-4) battery
    • Operating condition: temperature 0~50°C
    • Humidity: <95%
    • Size: 126x65x35mm, 5.0x2.6x1.6 inches
    • Weight: about 81g (not including batteries)
  3. Standard accessories:
    • Carrying case: 1pc
    • Operation manual: 1pc
    • F probe in built: 1pc
    • NF probe in built: 1pc
    • Calibration foils: 1 set
    • Substrate (iron): 1pc