Surface Roughness Tester, SRT-6210

表面粗糙度测试仪，SRT-6210

745-800 USD

加入意向

译文
原文

特征：
- 本仪器兼容四种现场标准，用于测量各种机械加工零件的表面粗糙度，计算相应的并清晰显示所有测量参数
- 多参数测量：Ra，Rz，Rq，Rt
- 高度复杂的电感传感器
- 四种滤波方法：RC，PC-RC，GAUSS和D-P
- 可通过可选电缆和RS232C接口软件与PC计算机进行统计，打印和分析
- 手动或自动关机
- 测试仪可以存储7组测量结果和测量条件，以供以后使用或下载到PC
规格：
- 显示：4位数，10 mm液晶显示屏，蓝色背光
- 参数：Ra，Rz，Rq，Rt
- 测量范围：Ra，Rq：0.005-16.00um / 0.020-629.9u英寸，Rz，Rt：0.020-160.0um / 0.078-6299u英寸
- 精度：不大于±10％
- 显示值波动：不大于6％
- 传感器：
  - 测试原理：电感型
  - 探针半径：5μm
  - 探针材料：金刚石
- 探针的发电测量：4mN（0.4gf）
- 探头角度：90°
- 导向头垂直半径：48mm
- 最大行程：17.5mm / 0.7英寸
- 截止长度（l）：0.25mm / 0.8mm / 2.5mm可选
- 评价长度：5mm
- 行车速度：
  - 采样长度= 0.25mm Vt = 0.135mm / s
  - 采样长度= 0.8mm Vt = 0.5mm / s
  - 采样长度= 2.5mm Vt = 1mm / s
  - 返回Vt = 1mm / s
- 轮廓数字滤波器：
  - 已过滤配置文件：RC
  - 过滤配置文件：PC-RC
  - 过滤配置文件：高斯
- 未过滤的轮廓：D-P
- 评估长度：5截止
- 电源锂离子电池：可充电
- 运行条件：
  - 温度：0-50℃
  - 湿度： <80% RH
- 尺寸：140x57x48mm（5.5x2.2x1.9英寸）
- 重量：约420g
可选部件：
- RS232C软件和电缆
- 延长杆
- 测量台

Features:
- This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters
- Multiple parameter measurement: Ra, Rz, Rq, Rt
- Highly sophisticated inductance sensor
- Four wave filtering methods: RC, PC-RC, GAUSS and D-P
- Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface
- Manual or automatic shut down
- The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC
Specifications:
- Display: 4 digits, 10 mm LCD, with blue backlight
- Parameters: Ra, Rz, Rq, Rt
- Measuring range: Ra, Rq: 0.005-16.00um/0.020-629.9u inch, Rz, Rt: 0.020-160.0um/0.078-6299u inch
- Accuracy: not more than ±10%
- Fluctuation of display value: not more than 6%
- Sensor:
  - Test principle: inductance type
  - Radius of probe pin: 5μm
  - Material of probe pin: diamond
- Dynamo-measurement of probe: 4mN (0.4gf)
- Probe angle: 90°
- Vertical radius of guiding head: 48mm
- Maximum driving stroke: 17.5mm/0.7-inch
- Cutoff length (l): 0.25mm/0.8mm/2.5mm optional
- Evaluation length: 5mm
- Driving speed:
  - Sampling length = 0.25mm Vt=0.135mm/s
  - Sampling length = 0.8mm Vt=0.5mm/s
  - Sampling length = 2.5mm Vt=1mm/s
  - Returning Vt=1mm/s
- Profile digital filter:
  - Filtered profile: RC
  - Filtered profile: PC-RC
  - Filtered profile: gauss
- Non-filtered profile: D-P
- Evaluation length: 5 cut-off
- Power Li-ion battery: rechargeable
- Operating conditions:
  - Temperature: 0-50°C
  - Humidity: <80% RH
- Size: 140x57x48mm (5.5x2.2x1.9 inches)
- Weight: about 420g
Optional parts:
- Software and cable for RS232C
- Extension rod
- Measurement stand