4.3寸触摸屏CCTV网络摄像机测试仪
| 模型 | tp-te1343ipc2 |
| 显示 | 4.3英寸电容式触摸屏,分辨率800(RGB)x 480 |
| 网络端口 | 10 / 100M自适应,RJ45 |
| 无线上网 | 内置WiFi,速度150M,显示无线摄像机图像 |
| IP摄像机类型 | 奥维夫行动网络有限公司 SNZ-5200,Tiandy TD-NC9200S2,Kodak IPC120L,Honeywell hicc-2300t,aipu-waton ip5000-bc-13mp / irs06-13mp,fine-tida ipc, fsj by-1080q,weisky ipc相机等 定制欢迎 |
| SDI摄像机测试 (可选的) * | 1通道SDI IN BNC输入,支持分辨率720p 60fps / 1080p 60fps / 1080i 60fps |
| TVI相机测试* (可选的) | 支持分辨率720p 25fps,30fps,50fps,60fps / 1080P 25fps,30fps, 摄像机OSD菜单控制同轴电缆 |
| CVI相机测试* (可选的) | 支持分辨率720p 25fps,30fps,50fps,60fps / 1080P 25fps,30fps, 摄像机OSD菜单控制同轴电缆 |
| AHD相机测试* (可选的) | 支持AHD2.0,支持分辨率1080P 25fps,30fps / 720p 25fps,30fps, 摄像机OSD菜单控制同轴电缆 |
| 视频信号测试 | 1通道视频输入BNC输入,1通道视频输出BNC输出,支持 pal / ntsc |
| 视频电平表* (可选的) | PEAK视频信号电平,SYNC信号电平,色度色度电平 测量 |
| 缩放图像 | 支持模拟摄像机和IP摄像机图像缩放/移动 |
| 快照,视频 记录和 回放 | 图像屏幕快照,记录,保存,查看和记录和播放 |
| HDMI输出 | 1路HDMI输出,支持1920 * 1080P |
| PoE电源输出 | 48V PoE电源输出,最大功率24W |
| 12V / 2A电源 输出 | 相机输出DC12V / 2A电源 |
| USB 5V电源 输出 | 5V 2A电源输出,作为电源 |
| 音频测试 | 1声道音频信号输入,测试声音是否正常,1声道音频 信号,连接耳机 |
| 云台控制 | 支持RS232 / RS485控制,波特600-115200bps,兼容 超过30个协议,如PELCO-D / P,三星,松下,林林, 雅安等 |
| 彩条发生器 | 输出单通道PAL / NTSC彩条视频信号用于测试显示器或 视频电缆(红,绿,蓝,白,黑) |
| UTP电缆测试仪 | 测试UTP电缆连接状态并在屏幕上显示。阅读 编号在屏幕上 |
| 数据监视器 | 捕获和分析来自控制设备的命令数据,也可以 发送十六进制 |
| 网络测试 | IP地址扫描,链路测试,Ping测试,快速搜索连接IP 摄像机和其他设备的IP地址 |
| 电缆示踪器* (可选的) | 通过音频信号搜索电缆 |
| PoE / PSE测试 | 测量POE开关或PSE电源电压和电缆 连接状态 |
| 数字万用表 (可选的)* | AC / DC电压,AC / DC电流,电阻,电容,数据保持, 相对测量,连续性测试 测试速度:3次/秒,数据范围-6600- + 6600。 |
| 光功率 米(可选)* | 校准波长(nm):850/1300/1310/1490/1550 / 1625nm 功率范围(dBm):-70- + 10dBm |
| 可视故障定位器 (可选的)* | 测试光纤的弯曲和断裂(SM和MM光纤) |
| TDR电缆 测试(可选)* | 电缆长度和短路测量(BNC电缆,同轴电缆, Cat5 / 6,电话线) |
| 功率 | |
| 外部电源 供应 | dc 12v(2a) |
| 电池 | 内置7.4V锂聚合物电池,5000mAh |
| 充电 | 充电7-8小时后,正常工作时间16小时 |
| 参数 | |
| 操作设置 | 电容式触摸屏,OSD菜单,中/英文 |
| 自动关闭 | 5-30(分钟) |
| 一般 | |
| 加工 温度 | -10ºc-+50ºc |
| 工作湿度 | 30%-90% |
| 尺寸/重量 | 212mm×135.5mm×56.5mm / 0.75Kg |





| Model | TP-TE1343IPC2 |
| Display | 4.3 inch Capacitive touch screen, resolution 800(RGB)x 480 |
| Network port | 10/100M auto adapt, RJ45 |
| WIFI | Built-in WiFi, speeds 150M, display wireless camera image |
| IP camera type | ONVIF, ACTi, Dahua IPC-HFW2100P, Hikvision, DS-2CD864-E13, Samsung SNZ-5200, Tiandy TD-NC9200S2, Kodak IPC120L, Honeywell HICC-2300T, Aipu-waton IP5000-BC-13MP/IRS06-13MP, fine-Tida IPC, FSJ BY-1080Q, WEISKY IPC camera and more Customized welcome |
| SDI camera test (Optional) * | 1 channel SDI IN BNC Input, Support resolution 720p 60fps / 1080p 60fps /1080i 60fps |
| TVI camera test* (Optional) | Support resolution 720p 25fps, 30fps, 50fps, 60fps / 1080P 25fps, 30fps, camera OSD menu control over coaxial cable |
| CVI camera test* (Optional) | Support resolution 720p 25fps, 30fps, 50fps, 60fps / 1080P 25fps, 30fps, camera OSD menu control over coaxial cable |
| AHD camera test* (Optional) | Support AHD2.0, Support resolution 1080P 25fps,30fps /720p 25fps,30fps , camera OSD menu control over coaxial cable |
| Video Signal test | 1 channel Video IN BNC input,1 channel Video OUT BNC output,support PAL/NTSC |
| Video level meter * (Optional) | PEAK video signal level, SYNC signal level, Color bar chroma level measurement |
| Zoom Image | Support Analog camera and IP camera image zoom /move |
| Snapshot,Video record and playback | Image Screen snapshot, record, save, view and record and play back |
| HDMI output | 1 channel HDMI output,support 1920*1080P |
| PoE power output | 48V PoE power output, Max power 24W |
| 12V/2A power output | Output DC12V/2A power for camera |
| USB 5V power output | 5V 2A power output,as a Power bank |
| Audio test | 1 channel audio signal input, test whether sound normal, 1 channel audio signal, to connect headphone |
| PTZ control | Support RS232/RS485 control, Baud 600-115200bps, Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc |
| Color bar generator | Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) |
| UTP Cable tester | Test UTP cable connection status and display on the screen. Read the number on the screen |
| Data monitor | Captures and analyzes the command data from controlling device,also can send hexadecimal |
| Network test | IP address scan, link test, Ping test, Quickly search the connection IP camera and other device's IP address |
| Cable Tracer * (Optional) | Search the cable by the audio signal |
| PoE/PSE test | Measurement POE switch or PSE power supply voltage and cable connection status |
| Digital Multi-meter (optional)* | AC/DC Voltage, AC/DC current, Resistance, Capacitance, Data hold, Relative measurement, Continuity testing Testing speed: 3 times/seconds, Data range -6600-+6600. |
| Optical power meter (Optional)* | Calibrated Wavelength(nm) :850/1300/1310/1490/1550/1625nm Power range(dBm): -70-+10dBm |
| Visual fault locator (optional)* | Test fiber's bending and breakage ( SM and MM fiber) |
| TDR cable test(optional) * | Cable length and short circuit measurement(BNC cable, Coaxial cable, Cat5/6, telephone cable) |
| POWER | |
| External power supply | DC 12V(2A) |
| Battery | Built-in 7.4V Lithium polymer battery , 5000mAh |
| Rechargeable | After charging 7-8 hours, normal working time 16 hours |
| Parameter | |
| Operation setting | Capacitive touch screen, OSD menu, Chinese/English |
| Auto off | 5-30 (mins) |
| General | |
| Working Temperature | -10ºC-+50ºC |
| Working Humidity | 30%-90% |
| Dimension/Weight | 212mm×135.5mm×56.5mm / 0.75Kg |




