Weighting Indicators for Floor/Platform Scale A12
地板/平台秤的加权指示器A12
- 介绍：
- 快速，高精度的A / D转换
- 防振软件
- 适用于平台秤，地磅，称重系统配备1-4个称重传感器
- 特征：
- A / D转换，可读性为1/30000
- 使用内部代码来替换重量观察和分析公差
- 软件强化抗振能力
- 零点跟踪，零量程设置（自动/手动）
- 设置数字滤波强度，范围和稳定时间
- 具有单位数据的计数功能在断电时保护保护
- 低电量报警，低电量时自动关机
- 可选功能：
- KG / LB开关功能
- 动物规模功能
- 两个固定值输出与TTL输出功能
- 参数：
- 输入信号范围：-10mV-15mV
- 输入灵敏度：1uV / e
- 称重传感器激励：DC 5V，≤150mA
- 最大称重传感器连接：在350Ω时为4
- 显示6位LCD，6个状态指示
- 可选接口RS232C串行通信
- 传输距离：RS232C30米
- Introduction:
- Fast speed, high precision A/D conversion
- Anti-vibration software
- Applied in platform scale, floor scale, weighing system equipped with 1-4 load cell
- Features:
- A/D conversion with readability 1/30000
- Use inner code to replace weight observing and analysis tolerance
- Software to strength anti-vibration ability
- Zero-tracking, Zero range setup (auto/manual)
- Set-up digital filter intensity, range and stable time
- Counting function with unit data save protection in case of power off
- Alarm for low battery and auto power off when low battery
- Optional functions:
- KG/LB switch function
- Animal scale function
- Two-fixed value outputs function with TTL output
- Parameters:
- Input signal range: -10mV-15mV
- Input sensitivity: 1uV/e
- Load cell excitation: DC 5V, ≤150mA
- Maximum load cell connection: 4 at 350Ω
- Display 6 bits LCD, 6 status indications
- Optional interface RS232C serial communication
- Transmission distance: RS232C30 meters
