Switch Mode Power Supply, Compliant with CE Standards

Switch Mode Power Supply, Compliant with CE Standards

开关电源,符合CE标准

议价

加入意向
  • 特殊功能:
    • 100至250V交流通用输入
    • 符合能源之星计划要求
    • 单输出:10〜15W
    • 稳压输出具有低纹波
    • 符合安全机构要求
    • 符合CE标准
    • 耐冲击聚碳酸酯外壳
    • 接受修改和定制设计
    • 墙插式
  • 主要规格:
    • 输入规格:
      • 输入电压范围:100〜250V AC,-10%,+ 6%
      • 线频率:47至63Hz
      • 输入电流:90V交流输入时最大为0.4A
      • 保护:内部原边电流保险丝,涌流限制
    • 输出规格:
      • 线路和负载调节:
        • 线电压:±1%(电缆末端)
        • 负载电压:±5%
      • 纹波:最大1%Vp-p
      • 瞬态响应:典型的50%负载变化时为0.5ms
      • 保护:过流保护(Hiccup),短路保护
    • 一般规格:
      • 拓扑:开关 - 固定频率反激
      • 漏电流:小于250uA
      • 耐电压:4,242V直流一次侧
      • 储存温度:-30至85°C
      • 效率:最低69%
      • 保持时间:最小为18ms,115V AC
      • EMI:符合EMC指令
      • MTBF:最少100,000计算小时
      • 批准和安全标准:UL60950-1,IEC / EN60950-1,K60950 EMC:EN55022 / 55024/61000
      • 外壳和尺寸(长x宽x高):3.09 x 3.38 x 1.18英寸(JEC#14),78.5 x 86 x 30mm
      • 表壳材质:黑色94V0聚碳酸酯
      • 电线和连接器:18AWG 1,800mm 2导线,其他电缆和连接器

  • Special features:
    • 100 to 250V AC universal input
    • Meets Energy Star program requirements
    • Single output: 10 to 15W
    • Regulated output with low ripple
    • Meets safety agency requirements
    • Compliant with CE standards
    • Impact-resistant polycarbonate enclosure
    • Modified and customized designs are accepted
    • Wall plug style
  • Key specifications:
    • Input specifications:
      • Input voltage range: 100 to 250V AC, -10%, +6%
      • Line frequency: 47 to 63Hz
      • Input current: 0.4A maximum at 90V AC input
      • Protection: internal primary current fuse, inrush limiting
    • Output specifications:
      • Line and load regulation:
        • Line voltage: ±1% (at end of cable)
        • Load voltage: ±5%
      • Ripple: 1% Vp-p maximum
      • Transient response: 0.5ms for 50% load change typical
      • Protection: over-current protection (Hiccup), short-circuitprotection
    • General specifications:
      • Topology: switching - fixed frequency flyback
      • Leakage current: less than 250uA
      • Dielectric withstand: 4,242V DC primary - secondary
      • Storage temperatures: -30 to 85°C
      • Efficiency: 69% minimum
      • Hold-up time: 18ms minimum at 115V AC
      • EMI: complies with EMC Directive
      • MTBF: 100,000 calculated hours minimum
      • Approvals and safety standards: UL60950-1, IEC/EN60950-1,K60950 EMC:EN55022/55024/61000
      • Case and dimensions (L x W x H): 3.09 x 3.38 x 1.18 inches(JEC#14), 78.5 x 86 x 30mm
      • Case material: black 94V0 polycarbonate
      • Cord and connectors: 18AWG 1,800mm 2 conductors, other cablesand connectors are available