UL compliant 9-30w t8 led tube lights with 5years warranty
UL符合9-30w t8 led灯管5年质保
UL符合9-30w t8 led灯管5年质保
描述：
S-Tube是一种升级版的CFL管更换LED。它具有最佳的亮度配置
和功率效率。
S-tube设计用于替代中型双引脚T8和T12荧光灯管。 S管直接适用于大多数荧光灯，提供一个简单的升级到高品质的LED照明。 S管经过优化，可提供与荧光灯相当的光输出，并提供白光LED照明的直接好处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。它比需要长时间，低占用率的荧光应用（如楼梯间，走廊，仓库和偏远位置）提供高达75％的节能。高质量的S管替换管由挤压铝制成，提供了一种几乎不可破坏，防破坏的照明解决方案。
为什么我们的S管？
比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，即时软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 无汞和其他危险材料，完全符合RoHS标准
- 白色LED连续工作（10年为其他颜色）
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适用于
极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全电气隔离设计，安全证明
t8 led灯管的特点
标准长度60cm / 120cm / 150cm
额定输入电压100-240V AC，50 / 60Hz，最大输入
电压277V AC
功率：9W / 18W / 22W
PF（功率因数）> 0.92
smd2835 led
描述：
S-Tube是一种升级版的CFL管更换LED。它具有最佳的亮度配置
和功率效率。
S-tube设计用于替代中型双引脚T8和T12荧光灯管。 S管直接适用于大多数荧光灯，提供一个简单的升级到高品质的LED照明。 S管经过优化，可提供与荧光灯相当的光输出，并提供白光LED照明的直接好处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。它比需要长时间，低占用率的荧光应用（如楼梯间，走廊，仓库和偏远位置）提供高达75％的节能。高质量的S管替换管由挤压铝制成，提供了一种几乎不可破坏，防破坏的照明解决方案。
为什么我们的S管？
比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，即时软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 无汞和其他危险材料，完全符合RoHS标准
- 白色LED连续工作（10年为其他颜色）
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适用于
极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全电气隔离设计，安全证明
t8 led灯管的特点
标准长度60cm / 120cm / 150cm
额定输入电压100-240V AC，50 / 60Hz，最大输入
电压277V AC
功率：9W / 18W / 22W
PF（功率因数）> 0.92
smd2835 led
UL compliant 9-30w t8 led tube lights with 5years warranty
Description:
S-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness
and power efficiency.
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes. S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start,cold temperature operation, and high quality light. It provides energysavings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our S-tube?
Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compliant
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4°F to 104°F (-20°C to 40°C),perfect for
environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
Feature of the t8 led tube
Standard length 60cm / 120cm / 150cm
Rated input voltage 100-240V AC, 50/60Hz,maximal input
voltage 277V AC
Power: 9W/ 18W / 22W
PF (power factor) ﹥0.92
SMD2835 LED
Description:
S-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness
and power efficiency.
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes. S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start,cold temperature operation, and high quality light. It provides energysavings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our S-tube?
Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compliant
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4°F to 104°F (-20°C to 40°C),perfect for
environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
Feature of the t8 led tube
Standard length 60cm / 120cm / 150cm
Rated input voltage 100-240V AC, 50/60Hz,maximal input
voltage 277V AC
Power: 9W/ 18W / 22W
PF (power factor) ﹥0.92
SMD2835 LED
