1.双LED灯具激光SPST摇杆/拨动防水开/关开关
2.电源继电器
3.刀片保险丝
超过8英尺的线
5. 2套电源连接器到灯具

产品内容：

1x线束
1x激光摇杆开关，带有阳和阳接线套件
用于7“，10”，13“，20”，30“，40”，50“的防水开/关开关的所有灯条的全配线套件。

安装：

1.将红色+导线从保险丝连接到电池+;将黑线从回答连接到电池;
2.连接继电器灯条的导线; （红/黑对应灯条的导线）;
3.将交换机的白色+ /黑线连接到电池或汽车系统的任何地方，为交换机供电;
4.打开开关的开/关按钮测试灯条。

1. Dual LED lights laser SPST rocker/toggle waterproof on/off switch
2. Power relay
3. Blade fuse
4. More than 8ft of wire
5. 2 sets of power connectors to light fixtures

Product content:

1x wiring harness
1x laser rocker switch with female & male wiring kits
Full wiring kit for all light bars with waterproof on/off switch for 7'', 10'', 13'', 20'', 30'', 40'', 50''

Installations:

1. Connect the red+ wire from the fuse to battery +; connect the black wire from the reply to the battery ¨C;
2. Connect the wire for lights bar from the relay; (red/black correspond to the wire of lights bar);
3. Connect the white +/black- wire of the switch to battery or any place of your car system to get power for the switch;
4. Turn on on/off button of switch to test the lights bar.