22w led tube light with 5 years warranty UL, 2538smd
22w LED灯管，5年保修UL，2538smd
22w LED灯管，5年保修UL，2538smd
描述：
S-tube是一种升级版的CFL管替代LED
它具有最佳的亮度和功率效率配置
S-tube设计用于替代中型双引脚T8和T12荧光灯管
S管直接适用于大多数荧光灯，提供了一个简单的升级到高品质的LED照明
S管经过优化，可提供与荧光灯相当的光输出，并提供白色LED照明的直接好处，使用寿命长，无需维护，高效，无汞，无回收，无闪烁，无嗡嗡，瞬间启动，低温操作和高品质的灯
它比需要长时间低占用率的荧光应用（如楼梯间，走廊，仓库和远程位置）节能高达75％
高品质的S-tube替换管由挤压铝材制成，提供了一种几乎不可破坏，防破坏的照明解决方案
荧光灯管节能70-80％
固态，高冲击/抗振动
工作无压载，即时软启动
无RF干扰，无闪烁或蜂鸣
快速和容易安装，以尽量减少改造成本
最低的维护成本，产生少量的热量
无汞和其他有害物质，完全符合RoHS指令
白色LED连续工作（10年为其他颜色）
额定工作温度范围为-4至104°F（-20至40°C），适用于极端气候环境
Epistar + Intematix LED封装解决方案，无专利麻烦
最新的设计
最好的性价比
完全电隔离设计，安全证明
技术参数：
标准长度：60/120 / 150cm
额定输入电压：100-240V AC，50 / 60Hz，最大输入电压277V AC
电源：9/18 / 22W
pf：> 0.92
2835 smd led
描述：
S-tube是一种升级版的CFL管替代LED
它具有最佳的亮度和功率效率配置
S-tube设计用于替代中型双引脚T8和T12荧光灯管
S管直接适用于大多数荧光灯，提供了一个简单的升级到高品质的LED照明
S管经过优化，可提供与荧光灯相当的光输出，并提供白色LED照明的直接好处，使用寿命长，无需维护，高效，无汞，无回收，无闪烁，无嗡嗡，瞬间启动，低温操作和高品质的灯
它比需要长时间低占用率的荧光应用（如楼梯间，走廊，仓库和远程位置）节能高达75％
高品质的S-tube替换管由挤压铝材制成，提供了一种几乎不可破坏，防破坏的照明解决方案
荧光灯管节能70-80％
固态，高冲击/抗振动
工作无压载，即时软启动
无RF干扰，无闪烁或蜂鸣
快速和容易安装，以尽量减少改造成本
最低的维护成本，产生少量的热量
无汞和其他有害物质，完全符合RoHS指令
白色LED连续工作（10年为其他颜色）
额定工作温度范围为-4至104°F（-20至40°C），适用于极端气候环境
Epistar + Intematix LED封装解决方案，无专利麻烦
最新的设计
最好的性价比
完全电隔离设计，安全证明
技术参数：
标准长度：60/120 / 150cm
额定输入电压：100-240V AC，50 / 60Hz，最大输入电压277V AC
电源：9/18 / 22W
pf：> 0.92
2835 smd led
22w led tube light with 5 years warranty UL,2538smd
Descriptions:
S-tube is an upgraded version CFL tube replacement with LED
It has the best configuration of brightness and power efficiency
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes
S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high-quality LED lighting
S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting long lifetime, no maintenance, high-efficiency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operating and high-quality light
It provides energy-savings of up to 75% over fluorescent applications that require long hours with low-occupancy rate such as stairwells, corridors, warehouses and remote locations
The high-quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution
70-80% energy-saving over fluorescent tubes
Solid state, high-shock/vibration-resistant
Working without ballast, instant soft-start
No RF interference, no flickering or buzzing
Quick and easy installation to minimize retrofit costs
Minimum maintenance costs, produce little heat
No mercury and other hazardous materials, fully RoHS Directive-compliant
Continuous operation for white LEDs (10 years for other colors)
Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environments with extreme climates
Epistar + Intematix LED packaging solution, no patent trouble
The newest design
The best cost-effective
Complete electricity isolation design, safety prove
Technical parameters:
Standard length: 60/120/150cm
Rated input voltage: 100-240V AC, 50/60Hz, maximum input voltage 277V AC
Power: 9/18/22W
PF: ﹥0.92
2835 SMD LED
Descriptions:
S-tube is an upgraded version CFL tube replacement with LED
It has the best configuration of brightness and power efficiency
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes
S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high-quality LED lighting
S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting long lifetime, no maintenance, high-efficiency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operating and high-quality light
It provides energy-savings of up to 75% over fluorescent applications that require long hours with low-occupancy rate such as stairwells, corridors, warehouses and remote locations
The high-quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution
70-80% energy-saving over fluorescent tubes
Solid state, high-shock/vibration-resistant
Working without ballast, instant soft-start
No RF interference, no flickering or buzzing
Quick and easy installation to minimize retrofit costs
Minimum maintenance costs, produce little heat
No mercury and other hazardous materials, fully RoHS Directive-compliant
Continuous operation for white LEDs (10 years for other colors)
Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environments with extreme climates
Epistar + Intematix LED packaging solution, no patent trouble
The newest design
The best cost-effective
Complete electricity isolation design, safety prove
Technical parameters:
Standard length: 60/120/150cm
Rated input voltage: 100-240V AC, 50/60Hz, maximum input voltage 277V AC
Power: 9/18/22W
PF: ﹥0.92
2835 SMD LED
