Private mode 8 inches 30W LED downlights with die-cast aluminum housing
私人模式8英寸30W LED筒灯，压铸铝外壳
描述：
•部件号：HL-D225K-30W
•说明：私人模式'K'系列8英寸30W LED筒灯
物理参数：
•基本尺寸：225（D）x65（H）mm，孔尺寸：195mm
•外壳：压铸铝外壳，PC盖。
•光源：LM80 0.5W Epistar 2835 SMD LED x 50pcs
•驱动器/连接：可移动Meanwell或Lifud驱动器/ PIP
•安装：通过弹簧夹凹陷
电气和光学参数：
•输入电压：200-240VAC或100-240VAC，50 / 60Hz
•功率因数/ phd / pe：pf> 0.9，phd<20, PE>88%
•过载/短路：保护
•浪涌/保护玻璃：> 1kV / II级
•高压测试范围：自隔离驱动器，3750VDC / 5mA / 60s
•功率：30W
•输出通量：2900-3100lm，100lm / W
•光束角（2θ1/ 2）：120deg，视角：160deg
•CCT：3000K，4000K，6000K，可定制
•cri（ra）/ sdcm：> 80 /<6
•提供TRIAC / 0-10V可调光解决方案
•可提供应急电源
特征：
•良好的形状，良好的散热和高品质
•私人模式，柔和均匀的灯光
•高通量效率高达95-100lm / W
•即时开启，无噪音，无闪光，无紫外线和红外线
•开关周期：≥15000
•在6000小时时90％流明维持率
•IP54保护，适用于潮湿位置
•工作温度范围：-25℃ - 45℃
•长寿命可达50,000小时以上
•3/5年有限保修（Lifud / Meanwell驱动器）
•符合CE，RoHS标准
警告：
•不能用于全封闭灯具
•请勿混淆120V，230V，277V，100-240VAC，120-277VAC输入电压。
其他：
•“K”系列包含2.5,3,4,6和8英寸模式
•请检查所附的“HIGHLED LED筒灯规格”，或联系我们了解详情。
•部件号：HL-D225K-30W
•说明：私人模式'K'系列8英寸30W LED筒灯
物理参数：
•基本尺寸：225（D）x65（H）mm，孔尺寸：195mm
•外壳：压铸铝外壳，PC盖。
•光源：LM80 0.5W Epistar 2835 SMD LED x 50pcs
•驱动器/连接：可移动Meanwell或Lifud驱动器/ PIP
•安装：通过弹簧夹凹陷
电气和光学参数：
•输入电压：200-240VAC或100-240VAC，50 / 60Hz
•功率因数/ phd / pe：pf> 0.9，phd<20, PE>88%
•过载/短路：保护
•浪涌/保护玻璃：> 1kV / II级
•高压测试范围：自隔离驱动器，3750VDC / 5mA / 60s
•功率：30W
•输出通量：2900-3100lm，100lm / W
•光束角（2θ1/ 2）：120deg，视角：160deg
•CCT：3000K，4000K，6000K，可定制
•cri（ra）/ sdcm：> 80 /<6
•提供TRIAC / 0-10V可调光解决方案
•可提供应急电源
特征：
•良好的形状，良好的散热和高品质
•私人模式，柔和均匀的灯光
•高通量效率高达95-100lm / W
•即时开启，无噪音，无闪光，无紫外线和红外线
•开关周期：≥15000
•在6000小时时90％流明维持率
•IP54保护，适用于潮湿位置
•工作温度范围：-25℃ - 45℃
•长寿命可达50,000小时以上
•3/5年有限保修（Lifud / Meanwell驱动器）
•符合CE，RoHS标准
警告：
•不能用于全封闭灯具
•请勿混淆120V，230V，277V，100-240VAC，120-277VAC输入电压。
其他：
•“K”系列包含2.5,3,4,6和8英寸模式
•请检查所附的“HIGHLED LED筒灯规格”，或联系我们了解详情。
| 私人模式'K'系列2.5,3,4,6,8英寸嵌入式LED天花灯 | |||||||
| 物理参数： •外壳：铝压铸壳体，PC盖。 •光源：LM80 0.5W Epistar 2835 SMD LED •驱动器/连接：可移动Meanwell或Lifud驱动器/ PIP •安装：通过弹簧夹凹陷 电气和光学参数 •输入电压：200〜240VAC或100〜240VAC，50 / 60Hz •功率因数/ phd / pe：pf> 0.9，phd<20, PE>88% •过载/短路：保护 •浪涌/保护玻璃：> 1KV / II级 •高压测试范围：SELF隔离驱动器，3750Vdc / 5mA / 60s •光束角（2θ1/ 2）：120deg，视角：160deg •CCT：3000K，4000K，6000K，可定制 •cri（ra）/ sdcm：> 80 / <6 •提供TRIAC / 0-10V可调光解决方案 •可提供应急电源 特征： •良好的形状，良好的散热和高品质 •私人模式，柔和均匀的灯光 •高通量效率高达95-100Lm / W •在6000小时时90％流明维持率 •IP54保护，适用于潮湿位置 •工作温度范围：-25℃〜45℃ •长寿命可达50,000小时以上 •3/5年有限保修（Lifud / Meanwell驱动程序） •符合CE，RoHS标准 | |||||||
| 没有。 | 零件号 | 尺寸 | 孔 | 功率 | 助焊剂 | 领导数量。 | 备注 |
| 1 | hl-d95k-5w | 95（D）×45mm | 75mm（D） | 5W | 500Lm | 10pcs | 2.5英寸 |
| 2 | h1-d110k-10w | 110（D）x47mm | 95mm（D） | 10W | 1000Lm | 20pcs | 3英寸 |
| 3 | hl-d145k-15w | 145（D）x53mm | 115mm（D） | 15W | 1500Lm | 30pcs | 4英寸 |
| 4 | hl-d195k-20w | 195（D）x65mm | 165mm（D） | 20W | 2000Lm | 40pcs | 6英寸 |
| 5 | h1-d225k-30w | 225（D）x65mm | 195mm（D） | 30W | 2900Lm | 60pcs | 8寸 |
Description:
• Part number: HL-D225K-30W
• Description: private mode 'K' series 8 inches 30W LED downlight
Physical parameters:
• Basic size: 225(D)x65(H)mm, hole size: 195mm
• Housing: die-cast aluminum housing, PC cover.
• Light sources: LM80 0.5W Epistar 2835 SMD LED x 50pcs
• Driver/connection: removable Meanwell or Lifud driver/PIP
• Installation: recessed by spring clips
Electrical & optical parameters:
• Input voltage: 200-240VAC or 100-240VAC, 50/60Hz
• Power factor/PHD/PE: PF﹥0.9, PHD<20, PE>88%
• Over load/short circuit: protection
• Surge/protection glass: ﹥1kV/Class II
• Hi-pot test range: self isolated driver, 3750VDC/5mA/60s
• Power: 30W
• Output flux: 2900-3100lm, 100lm/W
• Beam angle (2θ1/2): 120deg, view angle: 160deg
• CCT: 3000K, 4000K, 6000K, can be customized
• CRI (Ra)/SDCM: ﹥80/<6
• TRIAC/0-10V dimmable solution available
• Emergency power supplier available
Features:
• Nice shape with good heat dissipation and high quality
• Private mode with soft and uniform light
• High flux efficacy up to 95-100lm/W
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15000
• 90% lumen maintenance @ 6,000 hours
• IP54 protection, suitable for damp location
• Operating temperature range: -25℃ - 45℃
• Long life up to more than 50,000 hours
• 3/5 years limited warranty (Lifud/Meanwell driver)
• Comply with CE, RoHS standards
Caution:
• Can' t be used in fully enclosed luminaires
• Don't confuse 120V, 230V, 277V, 100-240VAC, 120-277VAC input voltage.
Others:
• 'K' series contained 2.5, 3, 4, 6 and 8 inches modes
• Please checking attached 'HIGHLED LED downlight specifications' or contact us for details.
• Part number: HL-D225K-30W
• Description: private mode 'K' series 8 inches 30W LED downlight
Physical parameters:
• Basic size: 225(D)x65(H)mm, hole size: 195mm
• Housing: die-cast aluminum housing, PC cover.
• Light sources: LM80 0.5W Epistar 2835 SMD LED x 50pcs
• Driver/connection: removable Meanwell or Lifud driver/PIP
• Installation: recessed by spring clips
Electrical & optical parameters:
• Input voltage: 200-240VAC or 100-240VAC, 50/60Hz
• Power factor/PHD/PE: PF﹥0.9, PHD<20, PE>88%
• Over load/short circuit: protection
• Surge/protection glass: ﹥1kV/Class II
• Hi-pot test range: self isolated driver, 3750VDC/5mA/60s
• Power: 30W
• Output flux: 2900-3100lm, 100lm/W
• Beam angle (2θ1/2): 120deg, view angle: 160deg
• CCT: 3000K, 4000K, 6000K, can be customized
• CRI (Ra)/SDCM: ﹥80/<6
• TRIAC/0-10V dimmable solution available
• Emergency power supplier available
Features:
• Nice shape with good heat dissipation and high quality
• Private mode with soft and uniform light
• High flux efficacy up to 95-100lm/W
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15000
• 90% lumen maintenance @ 6,000 hours
• IP54 protection, suitable for damp location
• Operating temperature range: -25℃ - 45℃
• Long life up to more than 50,000 hours
• 3/5 years limited warranty (Lifud/Meanwell driver)
• Comply with CE, RoHS standards
Caution:
• Can' t be used in fully enclosed luminaires
• Don't confuse 120V, 230V, 277V, 100-240VAC, 120-277VAC input voltage.
Others:
• 'K' series contained 2.5, 3, 4, 6 and 8 inches modes
• Please checking attached 'HIGHLED LED downlight specifications' or contact us for details.
| Private mode 'K' series 2.5,3,4,6,8 inches recessed LED downlights | |||||||
| Physical parameters: • Housing: Die-cast Aluminum housing, PC cover. • Light sources: LM80 0.5W Epistar 2835 SMD LED • Driver/connection: removable Meanwell or Lifud driver / PIP • Installation: recessed by spring clips Electrical & Optical parameters • Input voltage: 200~240VAC or 100~240VAC, 50/60Hz • Power factor / PHD / PE: PF﹥0.9, PHD<20, PE>88% • Over load / Short circuit: protection • Surge / Protection glass: ﹥1KV / Class II • Hi-pot test range: SELF Isolated driver, 3750Vdc / 5mA / 60s • Beam angle(2θ1/2): 120deg, View angle:160deg • CCT: 3000K,4000K,6000K, can be customized • CRI (Ra) / SDCM: ﹥80 / <6 • TRIAC / 0-10V dimmable solution available • Emergency power supplier available Feature: • Nice shape with good heat dissipation and high quality • Private mode with soft and uniform light • High flux efficacy up to 95-100Lm/W • 90% lumen maintenance @ 6,000 hours • IP54 protection, suitable for damp location • Operating temperature range: -25℃ ~ 45℃ • Long life up to more than 50,000 hours • 3 / 5 years limited warranty (Lifud / Meanwell driver) • Comply with CE,RoHS standards | |||||||
| NO. | Part number | Dimension | Hole | Power | Flux | LED Qty. | Remarks |
| 1 | HL-D95K-5W | 95(D)x45mm | 75mm(D) | 5W | 500Lm | 10pcs | 2.5inches |
| 2 | HL-D110K-10W | 110(D)x47mm | 95mm(D) | 10W | 1000Lm | 20pcs | 3inches |
| 3 | HL-D145K-15W | 145(D)x53mm | 115mm(D) | 15W | 1500Lm | 30pcs | 4inches |
| 4 | HL-D195K-20W | 195(D)x65mm | 165mm(D) | 20W | 2000Lm | 40pcs | 6inches |
| 5 | HL-D225K-30W | 225(D)x65mm | 195mm(D) | 30W | 2900Lm | 60pcs | 8inches |
