DKG972 for Honeywell burner controller control box ID:0432005 200/240V 50/60HZ 12VA
DKG972用于霍尼韦尔燃烧器控制器控制箱ID：0432005 200 / 240V 50 / 60HZ 12VA
霍姆韦尔控制器ra890g，ra890f，ec7800，rm7800，r4343e，r4343d，dko972，dko970，dmo976，dkg972，dmg971，dmg972，dmg973，tf830.3，tf832.3，tf834.3，tfi810，mmi810，mmi962，mmg810，tmg740- 3等
气/油燃烧系统控制用于商业和工业用点火，电机，先导阀，自动控制主阀和SPDT报警开关。
1. RA890F控制器和离子棒，光电管等整流探头和C7012紫外探头使用，RA890G和C7027，C7035配有小窥管紫外探头。
2.使用通用安装基座Q270A1024
3.在火焰失效，然后提供一个周期，如果故障继续，直接锁定。
4.使用SPDT报警触点
5.内置保护，防止点火时的高压干扰。
6.内部测试插座可直接测量火焰信号读数。
7.后盖上有一个手动复位按钮。
8.环境温度：-29℃〜46℃
9.最大点火时间：15秒，30秒
气/油燃烧系统控制用于商业和工业用点火，电机，先导阀，自动控制主阀和SPDT报警开关。
1. RA890F控制器和离子棒，光电管等整流探头和C7012紫外探头使用，RA890G和C7027，C7035配有小窥管紫外探头。
2.使用通用安装基座Q270A1024
3.在火焰失效，然后提供一个周期，如果故障继续，直接锁定。
4.使用SPDT报警触点
5.内置保护，防止点火时的高压干扰。
6.内部测试插座可直接测量火焰信号读数。
7.后盖上有一个手动复位按钮。
8.环境温度：-29℃〜46℃
9.最大点火时间：15秒，30秒
| bc1000a0110f bc1000a0110u bc1000a0220f bc1000a0220u l404f1078 uq270a1024 bc1000a0220u |
Honeywell controllers RA890G, RA890F, EC7800, RM7800, R4343E, R4343D, DKO972, DKO970, DMO976, DKG972, DMG971, DMG972, DMG973, TF830.3, TF832.3, TF834.3, TFI810, MMI810, MMI962, MMG810, TMG740-3, and the like
Gas/oil combustion system control for commercial and industrial use with ignition, motor, pilot valve, automatic control of main valve and SPDT alarm switch.
1. RA890F controller and ion rods, photocells and other rectifier probe and C7012 UV probe with the use, RA890G and C7027, C7035 with a small peep tube UV probe.
2. Use the universal mounting base Q270A1024
3. In the flame failure, and then provide a cycle, if the fault continues, direct lock.
4. With SPDT alarm contact
5. Built-in protection, to prevent high-voltage interference when the ignition.
6. The internal test socket can be directly measured flame signal readings.
7. There is a manual reset button on the rear cover.
8. Ambient temperature: -29℃ ~ 46℃
9. Maximum ignition time: 15 seconds, 30 seconds
Gas/oil combustion system control for commercial and industrial use with ignition, motor, pilot valve, automatic control of main valve and SPDT alarm switch.
1. RA890F controller and ion rods, photocells and other rectifier probe and C7012 UV probe with the use, RA890G and C7027, C7035 with a small peep tube UV probe.
2. Use the universal mounting base Q270A1024
3. In the flame failure, and then provide a cycle, if the fault continues, direct lock.
4. With SPDT alarm contact
5. Built-in protection, to prevent high-voltage interference when the ignition.
6. The internal test socket can be directly measured flame signal readings.
7. There is a manual reset button on the rear cover.
8. Ambient temperature: -29℃ ~ 46℃
9. Maximum ignition time: 15 seconds, 30 seconds
| BC1000A0110F BC1000A0110U BC1000A0220F BC1000A0220U L404F1078 UQ270A1024 BC1000A0220U |
