22w led tube light with CE ROHS IES, 5 warranty years 3014smd
22w LED灯管带CE ROHS IES，5年保修期3014smd
22w LED灯管带CE ROHS IES，5年保修期3014smd
新的h管tm
荧光灯管T8
标准长度60厘米，90厘米，120厘米，150厘米，180厘米和240厘米。
描述：
H管tm 是升级版的CFL管更换与LED。它具有最佳的亮度和功率效率配置。
H管tm 设计用于替代中型双引脚T8和T12荧光灯管H-管tm 直接适用于大多数荧光灯具，提供了一个简单的升级到高品质的LED照明H-管tm 被选择为提供与荧光相当的光输出并且提供白光LED照明的直接益处;长寿命，无维护，高效率，无汞，无再循环，无闪烁，无嗡嗡，瞬时启动，低温操作和高与楼宇，走廊，仓库和偏远地区等低占用率的长时间的荧光灯应用相比，高质量的灯管节能高达75％。高质量的C管tm 替换管由挤压铝制成，以提供几乎不可破坏，防破坏的照明解决方案。
为什么我们的H管tm?
- 比CFL管寿命更长：min。 10年（平均每天使用8小时）。
-70％〜80％比荧光灯节能。
- 固态，高冲击/振动性。
- 无压载，即时软启动。
- 无RF干扰，无闪烁或蜂鸣。
- 快速和容易安装，以尽量减少改造成本。
- 最低的维护成本，产生少量热量。
- 无汞和其他危险材料，完全符合RoHS标准。
- 白色LED连续工作（10年为其他颜色）。
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适合
极端气候环境。
-Epistar + Intermatix LED封装解决方案，非侵权专利。
- 最新设计。
- 最具成本效益。
- 完全绝缘的电气设计，最大的安全性。
技术参数
标准长度60厘米，90厘米，120厘米，150厘米，180厘米和240厘米。
额定输入电压100-277V AC
PF（功率因数）> 0.95
12V / 24V DC
光效> 110lm / w（透明和波纹覆盖）
smd 3014 led
LED管的应用：
停车场，住宅，仓库，标牌，办公室，火车站，公共汽车...
新的h管tm
荧光灯管T8
标准长度60厘米，90厘米，120厘米，150厘米，180厘米和240厘米。
描述：
H管tm 是升级版的CFL管更换与LED。它具有最佳的亮度和功率效率配置。
H管tm 设计用于替代中型双引脚T8和T12荧光灯管H-管tm 直接适用于大多数荧光灯具，提供了一个简单的升级到高品质的LED照明H-管tm 被选择为提供与荧光相当的光输出并且提供白光LED照明的直接益处;长寿命，无维护，高效率，无汞，无再循环，无闪烁，无嗡嗡，瞬时启动，低温操作和高与楼宇，走廊，仓库和偏远地区等低占用率的长时间的荧光灯应用相比，高质量的灯管节能高达75％。高质量的C管tm 替换管由挤压铝制成，以提供几乎不可破坏，防破坏的照明解决方案。
为什么我们的H管tm?
- 比CFL管寿命更长：min。 10年（平均每天使用8小时）。
-70％〜80％比荧光灯节能。
- 固态，高冲击/振动性。
- 无压载，即时软启动。
- 无RF干扰，无闪烁或蜂鸣。
- 快速和容易安装，以尽量减少改造成本。
- 最低的维护成本，产生少量热量。
- 无汞和其他危险材料，完全符合RoHS标准。
- 白色LED连续工作（10年为其他颜色）。
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适合
极端气候环境。
-Epistar + Intermatix LED封装解决方案，非侵权专利。
- 最新设计。
- 最具成本效益。
- 完全绝缘的电气设计，最大的安全性。
技术参数
标准长度60厘米，90厘米，120厘米，150厘米，180厘米和240厘米。
额定输入电压100-277V AC
PF（功率因数）> 0.95
12V / 24V DC
光效> 110lm / w（透明和波纹覆盖）
smd 3014 led
LED管的应用：
停车场，住宅，仓库，标牌，办公室，火车站，公共汽车...
22w led tube light with CE ROHS IES,5 warranty years 3014smd
NEW H-TubeTM
Fluoresent Led Tube T8
Standard length 60cm,90cm,120cm, 150cm,180cm and 240cm.
Description:
H-TubeTM is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness and power efficiency.
H-tubeTM is designed to replace medium bi-pin T8 and T12 fluorescent tubesH-tubeTM fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lightingH-tubeTM is optimezed to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting;long lifetimes,no maintenance,high efficency,no mercury,no recycling,no flickring,no buzzing,instant start,cold temperature operation,and high quality lightIt provides energy saving of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells,corridors,warehouse,and remote locations,The high quality C-tubeTM replacement tube is constructed from extruded aluminum to provide a virtually unbreakable,vandal proof lighting solution.
Why our H-tubeTM?
-Much longer life than CFL tube: min. 10 years (at an average usage of 8 hours per day).
-70%~80% Energy-saving over Fluorescent tubes.
-Solid State, high shock/vibration resistance.
-Work without ballast, Instant soft-start.
-No RF interference, No flickering or buzzing.
-Quick and easy installation to minimize retrofit costs.
-Minimum maintenance costs, generates little Heat.
-No Mercury and other hazardous materials, fully RoHS-compliant.
-Continuous operation for white LEDs (10 years for other colors).
-Rated to operate from -4°F to 104°F (-20°C to 40°C), perfect for
environments with extreme climates.
-Epistar+Intermatix LED packaging solution, non patent-infringing.
-The newest design.
-The best cost-effective.
-Completely insulated electrical design for maximum safety.
Technical parameters
Standard length 60cm,90cm,120cm, 150cm,180cm and 240cm.
Rated input voltage 100-277V AC
PF(power factor)﹥0.95
12V/24V DC available
Light efficiency﹥110lm/w(clear and wave cover)
SMD 3014 LED
Applications of the led tube:
parking lot,residential,warehouse,signage,office,railway station,bus...
NEW H-TubeTM
Fluoresent Led Tube T8
Standard length 60cm,90cm,120cm, 150cm,180cm and 240cm.
Description:
H-TubeTM is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness and power efficiency.
H-tubeTM is designed to replace medium bi-pin T8 and T12 fluorescent tubesH-tubeTM fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lightingH-tubeTM is optimezed to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting;long lifetimes,no maintenance,high efficency,no mercury,no recycling,no flickring,no buzzing,instant start,cold temperature operation,and high quality lightIt provides energy saving of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells,corridors,warehouse,and remote locations,The high quality C-tubeTM replacement tube is constructed from extruded aluminum to provide a virtually unbreakable,vandal proof lighting solution.
Why our H-tubeTM?
-Much longer life than CFL tube: min. 10 years (at an average usage of 8 hours per day).
-70%~80% Energy-saving over Fluorescent tubes.
-Solid State, high shock/vibration resistance.
-Work without ballast, Instant soft-start.
-No RF interference, No flickering or buzzing.
-Quick and easy installation to minimize retrofit costs.
-Minimum maintenance costs, generates little Heat.
-No Mercury and other hazardous materials, fully RoHS-compliant.
-Continuous operation for white LEDs (10 years for other colors).
-Rated to operate from -4°F to 104°F (-20°C to 40°C), perfect for
environments with extreme climates.
-Epistar+Intermatix LED packaging solution, non patent-infringing.
-The newest design.
-The best cost-effective.
-Completely insulated electrical design for maximum safety.
Technical parameters
Standard length 60cm,90cm,120cm, 150cm,180cm and 240cm.
Rated input voltage 100-277V AC
PF(power factor)﹥0.95
12V/24V DC available
Light efficiency﹥110lm/w(clear and wave cover)
SMD 3014 LED
Applications of the led tube:
parking lot,residential,warehouse,signage,office,railway station,bus...
