AVR Generator Digital Voltage Regulator for Basler, DECS-100-B11 A15 DECS-100-B15 B11

AVR Generator Digital Voltage Regulator for Basler, DECS-100-B11 A15 DECS-100-B15 B11

用于Basler,DECS-100-B11的AVR发电机数字电压调节器A15 DECS-100-B15 B11

1000-1100 USD

加入意向
1.励磁控制单元:额定输出为7A DC,63V DC
2.四种控制模式:自动电压调节(AVR),励磁电流调节(FCR),无功功率
调节(VAR),功率因数调节(PF)
3.汽车功能:DECS-100?提供外部? 52L / M触点,当触点打开时,启动下垂功能
DROOP值可以通过DECS-100软件设置和调试
为了更方便,可以很好地解决大量船舶频率负载时使用无功功率不等问题
4.网络功能:当节点打开和软件时,DECS-100提供外部52J / K触点
当同时激活时,VAR或PF功能被激活并且可以由软件设置,使得净发电机在额定功率因数下运行
5.发电机独立运行或汽车运行,DECS-100?只有工作在自动电压调节
(AVR)或励磁电流调节(FCR)
当发电机与电网并联运行时
,可用于无功功率调整(VAR)或功率因数调整(PF)模式
6.空载状态动态信息分析功能:该功能可以在发电机无负载状态下,根据一定的比例增大或减小发电机的电压,并可以记录发电机的波形
此功能用于发电机在准突发拔除条件下的模瞬态性能,对于PID调节,可以使调节器
出色的调节发电机性能和发电机性能优异
8.保护功能:DECS-100增加了发电机过电压保护,励磁过电压保护,过电压保护检测,过电压保护,过电压保护,过电压保护,过电压保护,过励限和过励关断保护
在保护发电机的同时,更好地保护调压板,调压板在优良的性能下工作
9.报警输出功能:用于各种保护,提供报警输出,方便查找和解决问题
注:DECS-100是数字电压调节器,具有内部可调PID参数设置,以改善发电机的稳态和瞬态特性
DROOP值可以通过软件设置,并联单元的无功功率可以平衡
SPDT开关更换外部电位器来调节发电机电压,调节范围更宽,更可靠



1. Excitation control unit: rated output of 7A DC at 63V DC
2. Four control modes: automatic voltage regulation (AVR), excitation current regulation (FCR), reactive power
Regulation (VAR), power factor adjustment (PF)
3. Car functions: DECS-100? Provide external? 52L / M contacts, when the contact is open, start droop function
DROOP value can be set and debugged by DECS-100 software
To be more convenient, can be good solution to large number of ship frequency load when the use of reactive power inequality problems
4. Network functions: DECS-100 provides external 52J/K contacts, when the node is open and software
When activated at the same time, the VAR or PF function is activated and can be set by software, so that net generator runs under the rated power factor
5. Generator stand-alone operation or car running, DECS-100? only work in automatic voltage regulation
(AVR) or field current regulation (FCR)
When the generator runs in parallel with the grid
, can work in reactive power adjustment (VAR) or power factor adjustment (PF) mode
6. No-load state dynamic information analysis function: this feature can be in the generator no-load state, according to certain ratio increases or decreases the voltage of the generator and can record the waveform of the generator
This function is used for modulo transient performance of generators under quasi-sudden unplugging conditions, for PID regulation, can make regulators
Excellent regulation of generator performance and generators with excellent
8. Protection function: DECS-100 increased the generator over-voltage protection, excitation over-voltage protection, detection of over-voltage protection, protection against over-voltage, over-voltage protection, protection against over-voltage protection, voltage loss protection, over-excitation limit and over-excitation shutdown protection
In the protection of generators at the same time, better protection of the regulator plate, the regulator plate in the excellent performance of the work
9. Alarm output function: for variety of protection, provide alarm output, easy to find and solve the problem
Note: DECS-100 is digital voltage regulator with internally adjustable PID parameter settings to improve the steady state and transient characteristics of the generator
DROOP value can be set by software and the reactive power of the parallel unit can be balanced
SPDT switch to replace the external potentiometer to adjust the generator voltage, adjust the scope of wider, more reliable