22w UL led tube light with 5years warranty, 2835SMD
22w UL LED灯管，5年质保，2835SMD
22w UL LED灯管，5年质保，2835SMD
S-Tube是一种升级版的CFL管更换LED。它具有最佳的亮度配置
和功率效率。
S-tube设计用于替代中型双引脚T8和T12荧光灯管。 S管直接适用于大多数荧光灯，提供一个简单的升级到高品质的LED照明。 S管经过优化，可提供与荧光灯相当的光输出，并提供白光LED照明的直接好处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。与需要长时间，低占用率的荧光灯应用（例如楼梯间，走廊，仓库和偏远地点）相比，它可节省高达75％的能源。高质量的S管替换管由挤压铝制成，提供了一种几乎不可破坏，防破坏的照明解决方案。
为什么我们的S管？
比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，即时软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 无汞和其他危险材料，完全符合RoHS标准
- 白色LED连续工作（10年为其他颜色）
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适用于
极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全电气隔离设计，安全证明
tubo led的特点
标准长度60cm / 120cm / 150cm
额定输入电压100-240V AC，50 / 60Hz，最大输入
电压277V AC
功率：9W / 18W / 22W
PF（功率因数）> 0.92
smd2835 led
S-Tube是一种升级版的CFL管更换LED。它具有最佳的亮度配置
和功率效率。
S-tube设计用于替代中型双引脚T8和T12荧光灯管。 S管直接适用于大多数荧光灯，提供一个简单的升级到高品质的LED照明。 S管经过优化，可提供与荧光灯相当的光输出，并提供白光LED照明的直接好处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。与需要长时间，低占用率的荧光灯应用（例如楼梯间，走廊，仓库和偏远地点）相比，它可节省高达75％的能源。高质量的S管替换管由挤压铝制成，提供了一种几乎不可破坏，防破坏的照明解决方案。
为什么我们的S管？
比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，即时软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 无汞和其他危险材料，完全符合RoHS标准
- 白色LED连续工作（10年为其他颜色）
- 可在-4°F至104°F（-20°C至40°C）的温度下工作，适用于
极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全电气隔离设计，安全证明
tubo led的特点
标准长度60cm / 120cm / 150cm
额定输入电压100-240V AC，50 / 60Hz，最大输入
电压277V AC
功率：9W / 18W / 22W
PF（功率因数）> 0.92
smd2835 led
22w UL led tube light with 5years warranty, 2835SMD
S-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness
and power efficiency.
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes. S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our S-tube?
Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compliant
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4°F to 104°F (-20°C to 40°C),perfect for
environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
Feature of the tubo led
Standard length 60cm / 120cm / 150cm
Rated input voltage 100-240V AC, 50/60Hz,maximal input
voltage 277V AC
Power: 9W/ 18W / 22W
PF (power factor) ﹥0.92
SMD2835 LED
S-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness
and power efficiency.
S-tube is designed to replace medium bi-pin T8 and T12 fluorescent tubes. S-tube fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. S-tube is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality S-tube replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our S-tube?
Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, Instant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compliant
-Continuous operation for white LEDs (10 years for other colors)
-Rated to operate from -4°F to 104°F (-20°C to 40°C),perfect for
environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Complete electricity isolation design, safety prove
Feature of the tubo led
Standard length 60cm / 120cm / 150cm
Rated input voltage 100-240V AC, 50/60Hz,maximal input
voltage 277V AC
Power: 9W/ 18W / 22W
PF (power factor) ﹥0.92
SMD2835 LED
