5〜8m LED红外人体感应3W-12W E27 LED灯泡
1. LED球泡灯特点：
1.采用超亮LED作为光源，环保
2.采用专用红外芯片控制系统，感应距离为5-8m，光束角度：100°C感应
角度120℃
3.尺寸（mm）：直径100，高度30
Lux（Ref）：≤7Lux可以调节
时间流逝：60秒±10
6.高效率恒流驱动器，无频闪，低光衰减和长寿命
7.在静态条件下，亮度模式可设置为10％-30％或熄灭
8.进口PC盖材料，汞和无铅
9.高流明输出，柔和的光线，高CRI
10.安装方便，直接替代传统荧光灯
11. PSE，FCC，GS和CE认证，无铅，环保，符合RoHS的要求
2. LED球泡灯的应用：
1.商业照明，环保照明，仓库，超市和家庭照明。
2. IT，呼叫中心，商场和展览馆，艺术画廊，医院酒店等公共场所
3.展览厅，艺术画廊，博物馆，办公室，阅览室，走廊，楼梯照明，如轮廓范围
3.警告：
1.安装时，避免强磁场和高压区;
2.确保正确连接，以避免对组件的短路损坏和火灾风险;
3.安装在通风良好的地方，以确保适当的环境温度;
4.使用本产品，请检查当地电压符合性产品要求;
5.上电前，检查确认接线是否正确，检查短路情况;
6.避免长时间直视灯光，避免伤害眼睛;
7.如果故障不能私人维护，请咨询制造商。

5~8m LED infrared human body induction 3W-12W E27 LED bulb
1. LED bulb lamp features:
1. Adopted super bright LED as lighting source, Eco-friendly
2. Adopted special infrared chip control system, 5-8m of induction distance, beam Angle: 100°C induction
Angle 120°C
3. Dimension (mm): Diameter 100, height 30
4. Lux ( Ref ): ≦7 Lux can be adjustable
5. Time lapse: 60 second ±10
6. High efficiency constant current driver, no strobe, low light decline and long lifespan
7. At static condition, brightness mode could set as 10%-30% or extinguished
8. Imported PC cover material, mercury and lead free
9. High lumen output, soft light, high CRI
10. Easy installation, replace traditional fluorescent lamps directly
11. PSE , FCC, GS and CE Certified, Lead free, Eco-friendly, conforms to the requirements of RoHS
2. Applications of LED bulb light:
1. Commercial lighting, environmentally friendly lighting, warehouse, supermarket and home illumination.
2. IT, call centers, shopping malls and exhibition hall, art gallery, the hospital hotel and other public place
3. Exhibition hall, art galleries, museums, offices, reading-room, corridor, staircase lighting, such as contour range
3. Warning:
1. When installing, avoid strong magnetic fields and high-pressure regions;
2. Ensuring a solid connection correctly in order to avoid short-circuit damage to components and fire risk;
3. Install in a well ventilated place to ensure appropriate environmental temperature;
4. Using this product please check the local voltage compliance product requirements;
5. Before powering on, check to confirm wiring is correct, check for short circuits;
6. Avoid looking directly at the light for long periods to avoid harming of eyes;
7. In case of failure do not maintain in private, please refer to manufacturer.