T8 LED Tube Lights with CE ROHS, 80% energy-saving
T8 LED灯管采用CE ROHS，节能80％
T8 LED灯管采用CE ROHS，节能80％
H-Tube是一种升级版的CFL管替代LED。它具有最佳的亮度和功率效率配置。
H管tm 设计用于替代中型双引脚T8和T12荧光灯管。 H管tm 直接适用于大多数荧光灯具，提供了一个简单的升级到高品质的LED照明。 H管tm 被优化以提供与荧光相当的光输出并且提供白光LED照明的直接益处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。与需要长时间，低占用率的荧光灯应用（例如楼梯间，走廊，仓库和偏远地点）相比，它可节省高达75％的能源。高品质的H管tm 替换管由挤压铝制成，以提供实际上不易破碎，防破坏的照明解决方案。
为什么我们的M管？
- 比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，常开软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 没有汞和其他危险材料，完全符合RoHS
- 白色LED连续工作（10年为其他颜色）
-20°C至40°C），非常适合极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全绝缘的电气设计，最大的安全性
-ETL认证
LED管的技术参数
- 标准长度60厘米，120厘米和150厘米
- 输入电压100-240V AC，50-60Hz，最大输入电压277V AC。
-PF（功率因数）> 0.9
-12V / 24V DC。
光效率> 95 lm / W
H-Tube是一种升级版的CFL管替代LED。它具有最佳的亮度和功率效率配置。
H管tm 设计用于替代中型双引脚T8和T12荧光灯管。 H管tm 直接适用于大多数荧光灯具，提供了一个简单的升级到高品质的LED照明。 H管tm 被优化以提供与荧光相当的光输出并且提供白光LED照明的直接益处;寿命长，无需维护，效率高，无汞，无回收，无闪烁，无嗡嗡声，瞬间启动，低温操作和高品质光源。与需要长时间，低占用率的荧光灯应用（例如楼梯间，走廊，仓库和偏远地点）相比，它可节省高达75％的能源。高品质的H管tm 替换管由挤压铝制成，以提供实际上不易破碎，防破坏的照明解决方案。
为什么我们的M管？
- 比CFL管寿命更长：min。 10年（假设光是每天8小时）
-70％〜80％比荧光灯节能
- 固态，高冲击/振动
- 无压载，常开软启动
- 无RF干扰，无抖动或嗡嗡声
- 快速和容易安装，以尽量减少改造成本
- 最低维护成本，产生少量热量
- 没有汞和其他危险材料，完全符合RoHS
- 白色LED连续工作（10年为其他颜色）
-20°C至40°C），非常适合极端气候环境
-Epistar + Intermatix LED封装解决方案，无专利麻烦
- 最新设计
- 最具成本效益
- 完全绝缘的电气设计，最大的安全性
-ETL认证
LED管的技术参数
- 标准长度60厘米，120厘米和150厘米
- 输入电压100-240V AC，50-60Hz，最大输入电压277V AC。
-PF（功率因数）> 0.9
-12V / 24V DC。
光效率> 95 lm / W
T8 LED Tube Lights with CE ROHS, 80% energy-saving
H-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness and power efficiency.
H-TubeTM is designed to replace medium bi-pin T8 and T12 fluorescent tubes. H-TubeTM fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. H-TubeTM is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality H-TubeTM replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our M-tube ?
-Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, lnstant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compl iant
-Continuous operation for white LEDs (10 years for other colors)
-20°C to 40°C),perfect for environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Completely insulated electrical design for maximum safety
-ETL certification
Technical Parameters of the led tube
-Standard length 60cm, 120cm and150cm
-Rated input voltage 100-240V AC, 50-60Hz,maximal input voltage 277V AC.
-PF (power factor) ﹥0.9
-12V/24V DC available.
-Light efficiency ﹥ 95 lm/W
H-Tube is an upgraded version CFL tube replacement with LED. It has the best configuration of brightness and power efficiency.
H-TubeTM is designed to replace medium bi-pin T8 and T12 fluorescent tubes. H-TubeTM fits directly into most fluorescent fixtures providing a simple upgrade to high quality LED lighting. H-TubeTM is optimized to provide light outputs comparable to fluorescent and delivers the immediate benefits of white-LED lighting; long lifetimes, no maintenance, high efficency, no mercury, no recycling, no flickering, no buzzing, instant start, cold temperature operation, and high quality light. It provides energy savings of up to 75% over fluorescent applications that require long hours with low occupancy rates such as stairwells, corridors, warehouses, and remote locations. The high quality H-TubeTM replacement tube is constructed from extruded aluminum to provide a virtually unbreakable, vandal proof lighting solution.
Why our M-tube ?
-Much longer life than CFL tube: min. 10 years (suppose that light is on 8 hours per day)
-70%~80% Energy-saving over Fluorescent tubes
-Solid State, high shock/vibration resistant
-Work without ballast, lnstant soft-start
-No RF interference, No fickering or buzzing
-Quick and easy installation to minimize retrofit costs
-Minimum maintenance costs, Produce little Heat
-No Mercury and other hazardous materials, fully RoHS-compl iant
-Continuous operation for white LEDs (10 years for other colors)
-20°C to 40°C),perfect for environments with extreme climates
-Epistar+Intermatix LED packaging solution, no patent trouble
-The newest design
-The best cost-effective
-Completely insulated electrical design for maximum safety
-ETL certification
Technical Parameters of the led tube
-Standard length 60cm, 120cm and150cm
-Rated input voltage 100-240V AC, 50-60Hz,maximal input voltage 277V AC.
-PF (power factor) ﹥0.9
-12V/24V DC available.
-Light efficiency ﹥ 95 lm/W
