touch dimmer with BLUE backlight, 2015 new product
触摸调光器与蓝色背光，2015新产品
触摸调光器与蓝色背光，2015新产品
lc-0rgb-d4-11
可触摸LED灯控制器的特点：
采用玻璃触摸控制面板，大方美观设计，双MCU控制触摸变化和模式变化;更快的触摸响应速度，PWM灰度级高达65536，并且颜色逐渐变化无振动。 Bui in-OLCD显示模块更改状态，因此用户可以
明确控制灯的运行状态，精确控制灯的亮度;可用于控制直流12V / 24V恒压RGB LED灯条和LED灯。控制器采用触摸环和可触摸
关键技术，颜色和16种改变模式可随机设置。控制器采用高功率MOS驱动器，因此适用于各种功率不同的RGB LED产品。
可触摸LED灯控制器的技术参数：
输入电压：DC12V-DC24V
输出通道：3通道（RGB）
输出电流：每通道2A
输出功率：72W（12V输入）/ 144W（24V输入）
功能描述可触摸LED灯控制器：
电容触摸控制，OLCD状态显示;
2. 17种变化模式;
3.断电记忆功能;
颜色和模式平滑逐渐变化。
控制器按键说明
1.开/关键。按开/关键，OLCD显示，触摸面板和控制器输出的背光将关闭。再次按下开/关键，触摸面板背光和控制器输出将开启。
2. -mode键。按模式键，OLCD显示MODE + 1，并进入下一模式。灯光将改变为相同的模式。当模式显示17时，再次按模式键，输入型号。长按将快速更改模式;
- “+”键。在静态显示颜色模式（MODE1-7），通过按'+'键增加亮度，OLCD显示Brt值将增加（0-255），同时灯泡亮度将增加在动态显示模式-17），按'+'，变化速度会增加，OLCD显示速度值会增加（0-255），灯变化速度会加快。长按会迅速增加。
4. - ' - '键。在静态显示颜色模式（MODE1-7）下，亮度将通过按“ - ”键减小，OLCD显示Brt值将减小（255-0），同时灯泡亮度也会降低。
在动态显示模式（MODE8-17）下，按“ - ”，变化速度将减小，OLCD显示速度值将减小（255-0），灯泡变化速度将变慢。长按速度会很快减慢
lc-0rgb-d4-11
可触摸LED灯控制器的特点：
采用玻璃触摸控制面板，大方美观设计，双MCU控制触摸变化和模式变化;更快的触摸响应速度，PWM灰度级高达65536，并且颜色逐渐变化无振动。 Bui in-OLCD显示模块更改状态，因此用户可以
明确控制灯的运行状态，精确控制灯的亮度;可用于控制直流12V / 24V恒压RGB LED灯条和LED灯。控制器采用触摸环和可触摸
关键技术，颜色和16种改变模式可随机设置。控制器采用高功率MOS驱动器，因此适用于各种功率不同的RGB LED产品。
可触摸LED灯控制器的技术参数：
输入电压：DC12V-DC24V
输出通道：3通道（RGB）
输出电流：每通道2A
输出功率：72W（12V输入）/ 144W（24V输入）
功能描述可触摸LED灯控制器：
电容触摸控制，OLCD状态显示;
2. 17种变化模式;
3.断电记忆功能;
颜色和模式平滑逐渐变化。
控制器按键说明
1.开/关键。按开/关键，OLCD显示，触摸面板和控制器输出的背光将关闭。再次按下开/关键，触摸面板背光和控制器输出将开启。
2. -mode键。按模式键，OLCD显示MODE + 1，并进入下一模式。灯光将改变为相同的模式。当模式显示17时，再次按模式键，输入型号。长按将快速更改模式;
- “+”键。在静态显示颜色模式（MODE1-7），通过按'+'键增加亮度，OLCD显示Brt值将增加（0-255），同时灯泡亮度将增加在动态显示模式-17），按'+'，变化速度会增加，OLCD显示速度值会增加（0-255），灯变化速度会加快。长按会迅速增加。
4. - ' - '键。在静态显示颜色模式（MODE1-7）下，亮度将通过按“ - ”键减小，OLCD显示Brt值将减小（255-0），同时灯泡亮度也会降低。
在动态显示模式（MODE8-17）下，按“ - ”，变化速度将减小，OLCD显示速度值将减小（255-0），灯泡变化速度将变慢。长按速度会很快减慢
touch dimmer with BLUE backlight,2015 new product
LC-0RGB-D4-11
Features of the touchable led light controller:
Adopt glass touchable control panel, generous and beautiful designed, bui lt-in dual MCU, which control touch change and mode change seperately ; faster touch response speed, PWM gray level up to 65536,and color gradual ly change without vibration. Bui lt-in OLCD display module change state, so user can
clearly know running state of control ler , and control brightness of lamp accurately ; can be used to control DC 12V/24V constant voltage RGB LED strip and LED lamp. Control ler adopt touchable ring and touchable
key technology, and the color and 16 change modes can be set at random. Control ler adopt high power MOS driver, so it is suitable for all kinds of RGB LED products with different power.
Technical Parameters of the touchable led light controller:
Input voltage: DC12V-DC24V
Output channel :3 channels (RGB)
Output current :2A each channel
Output power: 72W(12V input )/144W(24V input)
Function Description of the touchable led light controller:
1. Capacitive touch control, OLCD state display;
2. 17 kinds of change modes;
3. Power-off memory function;
4. Colors and modes change smoothly and gradually.
Controller Key Description
1.-on/off key. Press on/off key, OLCD display, backlight of touch panel and control ler output will be off . Press on/off key again, backl ight of touch panel and controller output will be on.
2. -mode key. Press mode key, OLCD display MODE+1, and enter next mode. The lamp light will change as the same mode. When mode display 17, press mode key again, enter model. Long press will change mode quickly;
3. - '+' key. In static display color mode (MODE1-7), the brightness will increase via pressing '+' key, and OLCD display Brt value will increase (0-255), and the lamp brightness will increase at the same timeIn dynamic display mode(MODE8-17), press '+' , the change speed will increase, OLCD display the speed value will increase(0-255), the lamp change speed will accelerate. Long press will increase quickly.
4. - '-' key. In static display color mode (MODE1-7), the brightness will decrease via pressing '-' key, and OLCD display Brt value will decrease (255-0),and the lamp brightness will decrease at the same time.
In dynamic display mode(MODE8-17), press '-' , the change speed will decrease, OLCD display the speed value will decrease(255-0), the lamp change speed will slow. Long press the speed will slow rapidly
LC-0RGB-D4-11
Features of the touchable led light controller:
Adopt glass touchable control panel, generous and beautiful designed, bui lt-in dual MCU, which control touch change and mode change seperately ; faster touch response speed, PWM gray level up to 65536,and color gradual ly change without vibration. Bui lt-in OLCD display module change state, so user can
clearly know running state of control ler , and control brightness of lamp accurately ; can be used to control DC 12V/24V constant voltage RGB LED strip and LED lamp. Control ler adopt touchable ring and touchable
key technology, and the color and 16 change modes can be set at random. Control ler adopt high power MOS driver, so it is suitable for all kinds of RGB LED products with different power.
Technical Parameters of the touchable led light controller:
Input voltage: DC12V-DC24V
Output channel :3 channels (RGB)
Output current :2A each channel
Output power: 72W(12V input )/144W(24V input)
Function Description of the touchable led light controller:
1. Capacitive touch control, OLCD state display;
2. 17 kinds of change modes;
3. Power-off memory function;
4. Colors and modes change smoothly and gradually.
Controller Key Description
1.-on/off key. Press on/off key, OLCD display, backlight of touch panel and control ler output will be off . Press on/off key again, backl ight of touch panel and controller output will be on.
2. -mode key. Press mode key, OLCD display MODE+1, and enter next mode. The lamp light will change as the same mode. When mode display 17, press mode key again, enter model. Long press will change mode quickly;
3. - '+' key. In static display color mode (MODE1-7), the brightness will increase via pressing '+' key, and OLCD display Brt value will increase (0-255), and the lamp brightness will increase at the same timeIn dynamic display mode(MODE8-17), press '+' , the change speed will increase, OLCD display the speed value will increase(0-255), the lamp change speed will accelerate. Long press will increase quickly.
4. - '-' key. In static display color mode (MODE1-7), the brightness will decrease via pressing '-' key, and OLCD display Brt value will decrease (255-0),and the lamp brightness will decrease at the same time.
In dynamic display mode(MODE8-17), press '-' , the change speed will decrease, OLCD display the speed value will decrease(255-0), the lamp change speed will slow. Long press the speed will slow rapidly
