品牌：Smartgen
型号：HGM6120K
Smartgen自动发动机控制模块HGM6120K
概要

HGM6100K系列发电机控制器集成数字智能和网络技术，用于柴油发电机的自动控制系统。它可以执行包括自动启动/停止数据测量和报警在内的功能。控制器采用LCD显示可选中，英文显示界面，操作方便可靠。
HGM6100K系列发电机控制器采用微处理技术，可对多参数进行精确测量恒值调节定时和阈值设置等。它可广泛应用于所有类型的发电机自动控制系统，紧凑结构先进的电路连接简单，可靠性高。

性能和特点

HGM6100K控制器有两种类型：
HGM6110K：ASM（自动启动模块）
HGM6120K：AMF（自动电源故障模块）
使用微处理器作为核心图形LCD与大屏幕和背光显示中英文键触摸操作。
有一个RS485端口可以用于与PC通信。
精度测量和显示
电源电压
电源频率（Hz）
电源电流
发电机电压
发电机电流
发电机频率（Hz）
发电机有功功率（kW）
发电机无功功率（kVar）
发电机视在功率（kVA）
发电机功率因数
发电机开始计数
发电机小时数
发电机累计电能（kWh）
发电机温度
发电机压力
发电机燃油油位
启动电池电压
可配置的单相2线或2相3线或3相4线交流系统输入
控制保护：自动启动/停止负载转换和发电机报警
参数设置：允许用户修改设置并将其存储在内部FLASH存储器中，即使断电，参数也不会丢失。所有参数可以从前面板设置，或者由使用SG72的PC设置
三通道模拟输入可以与电阻式温度/压力/燃料液位传感器联接可以直接使用多个温度和压力传感器（即VDO DATCON CUMMINS）也可以通过输入8点曲线选择“用户定义”传感器
发电机累积电能显示
安全密码保护的编程级别
几个起动成功条件是可选的
内置的速度/频率检测单元可以准确地判断诸如起动成功和超速等状态
电源范围宽，适应不同的启动电池电压环境
所有参数使用数字调制放弃模拟调制，使用传统的电子电位器可靠性和稳定性都有所提高

Brand name: Smartgen
Model number: HGM6120K
Smartgen automatic engine control module HGM6120K
SUMMARY

HGM6100K series generator controller integrating digital intelligent and network techniques is used for automatic control system of diesel generator. It can carry out functions including automatic start/stop data measure and alarming. The controller uses LCD display optional Chinese and English display interface with operation easy and reliable.
HGM6100K series generator controller uses micro-processing technique which can carry out precision measure constant value adjustment timing and threshold setting and etc. of multi-parameters. It can be widely used in all types of generator automatic control system for compact structure advanced circuits simple connections and high reliability.

Performance and characteristics

HGM6100K controller has two types:
HGM6110K: ASM (Automatic Start Module)
HGM6120K: AMF (Automatic Mains Failure Module)
Using microprocessor as a core graphics LCD with big screen and backlight display between Chinese and English key touch for operation.
Have a RS485 port can used for communicate to PC.
Precision measure and display of
Mains voltage
Mains frequency (Hz)
Mains current
Generator voltage
Generator current
Generator frequency (Hz)
Generator active power (kW)
Generator inactive power (kVar)
Generator apparent power (kVA)
Generator power factor
Generator starts count
Generator hour s count
Generator cumulate electric energy (kWh)
Generator temperature
Generator pressure
Generator fuel level
Start battery voltage
Configurable single -phase 2 wires or 2-phase 3 wires or 3-phase 4 wires AC system input
Control protection: Automatic start/stop load transfer and alarming of generator
Parameters setting: Allow user to modify setting and store them inside internal FLASH memory the parameters can not be lost even with power down. All parameters can be set from the front panel or be set by PC used SG72
Three channel analog inputs may joint with Resistive-type temperature/ pressure/ fuel level sensors several temperature and pressure sensors can be used directly (ie. VDO DATCON CUMMINS) also may select 'user defined' sensor via entering 8 point curves
Display of generator cumulated electric energy
Security password-protected programming levels
Several crank success conditions are optional
Built-in speed/frequency detecting units can accurately judge the states such as crank success and over speed
Power supply range is wide accommodating to different starting battery voltage environments
All parameters use digital modulation abandoning analog modulation using conventional electronic potentiometer reliability and stability are increase