OEM Mini Rubber Tracks with Wheels (76*12.7*120)

OEM Mini Rubber Tracks with Wheels (76*12.7*120)

OEM车轮迷你橡胶履带(76 * 12.7 * 120)

2+
115 USD
10+
90 USD

加入意向
型号。 76*12.7*120
应用 机器人和小型机械
条件
宽度 76毫米
链接 120(可定制)
重量 1.9公斤
可得到
保证 保证正常使用一年
运输包装 裸包装或木托盘
起源 上海,中国
类型 履带
证明 iso9001:2000
发源地 中国上海(大陆)
沥青 12.7毫米
长度 1524毫米
材料 橡胶和钢铁
交货 付款后10天
商标 PY
规范 76*12.7*120
HS编码 8431499900
橡胶履带型号:
76毫米*12.7毫米* 120
链接号码:120(可定制)
间距:12.7mm
宽度:76mm
总长:1524mm
橡胶履带规格:
用于挖掘机和卡车的橡胶履带橡胶履带
1)由多种特殊和天然橡胶制成
2)低噪音和振动ratio
挖掘机橡胶履带,挖掘机/挖掘机/卡车/收割机橡胶履带
橡胶履带,神钢,现代,日立,久保田,山猫,竹内
对于挖掘机,挖掘机,装载机,收割机,卡车,拖拉机
橡胶履带类型:
1)。连续橡胶履带
2)。常规型或可互换型橡胶履带
3)。保修:一般使用一年保修
4)。应用:小型挖掘机,推土机,自卸车,履带式装载机,履带式起重机,履带车,
农业机械,摊铺机等专用机械
橡胶履带的特点:
(1)。少圆损坏
橡胶履带对道路造成的伤害较钢轨道少,而且软土的车辙比两者都少
车轮产品钢轨。
(2)。低噪声
在拥堵地区的设备受益,橡胶履带产品的噪音低于钢轨。
(3)。高速
橡胶履带允许机器以比钢轨更高的速度行驶。
(4)。振动较小
橡胶履带使机器和操作者免受振动,延长机器的使用寿命
降低操作疲劳。
(5)。地面压力低
橡胶轨道装备机械的地面压力可以相当低,约0.14-2.30kg / cmm,
在湿地和软地形上使用的主要原因。
(6)。优越的牵引力
橡胶,轨道车辆的增加牵引力允许他们拉两倍的轮子车辆的负载
合理的体重。
关于我们:
我厂主要生产橡胶履带,特别适用于这类机器:
雪橇/雪地摩托车,机器人,轮椅,(迷你)挖掘机,履带式装载机,沥青摊铺机,农业
收割机,自卸车等。
橡胶履带质量控制:
检验工作
2.产品审核/审查(可根据客户要求严格检验)
3.生产程序审核/审查(整个程序控制)
原材料检验/检验;采购部件检验(包括所有采购材料)
尺寸 链接 重量 长度
76*12.7*120 120(可定制) 1.9公斤 1524毫米 可以使用
Model NO. 76*12.7*120
Application Robot and Small Machinery
Condition New
Width 76mm
Link 120 (Can Be Customized)
Weight 1.9kg
Sprocket Available
Warranty Guarantee One Year Under Normal Use
Transport Package Bare Packing or Wooden Pallets
Origin Shanghai, China
Type Crawler
Certification ISO9001: 2000
Place of Origin Shanghai, China (Mainland)
Pitch 12.7mm
Length 1524mm
Material Rubber and Steel
Delivery 10 Days After Payment
Trademark PY
Specification 76*12.7*120
HS Code 8431499900
Rubber Track Model:
76mm*12.7mm*120
Link No: 120 (Can Be Customized)
Pitch Length: 12.7mm
Width: 76mm
Total Length: 1524mm
Specifications of rubber track:
Rubber crawler rubber track for excavator and trucks
1) Made from multiple special and natural rubber
2) Low noise & vibratiobratioratio
Excavator rubber tracks, rubber track for excavator/ digger/trucks/harvester
Rubber tracks for, Kobelco, Hyundai, Hitachi, Kubota, Bobcat, Takeuchi
For excavator, digger, loader, harvester, truck, tractor
1. Type of rubber tracks:
1). Continuous rubber track
2). Conventional type or interchangeable type rubber track
3). Warranty: Guarantee one year under normal use
4). Application: Mini-excavator, bulldozer, dumper, crawler loader, crawler crane, crawler carrier vehicle,
Agriculture machinery, paver and other special machine
2. The feature of rubber tracks:
(1). Less round damage
Rubber tracks cause less damage to roads than steel tracks, and less rutting of soft ground than either
Steel tracks of wheel products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration, extending the machine's lifetime and
Lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ cmm,
A major reason for its use on the wet and soft terrain.
(6). Superior traction
The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the
Sane weight.
About Us:
Our plant mainly produce Rubber Track which are specially good use for these kind of Machine:
Snowbower/Snowmobile, Robot, Wheelchair, (mini)Excavators, Track loaders, Pitch Paver, Agricultural
Harvester, Dumpers...Etc.
Quality Control for the Rubber track:
1. Ex works Inspection
2. Products Audits/Examination(Strict inspection according to customer's request)
3. Production Procedure Audit/Examination(Entire Procedure Control)
4. Raw material Inspection/Examination; Purchased Parts Inspection(Including All Purchased Material)
Size Link Weight Length Sprocket
76*12.7*120 120(can be customized) 1.9Kg 1524mm can be avaliable