19′′ Outdoor Server Cabinet with A/C
19“户外服务器机柜，带A / C
议价
加入意向| 型号。 | WB-OD-A |
| 用法 | 网络集成系统 |
| 风扇编号 | 四 |
| 证明 | ce，iso，rohs，gs |
| 厚度 | 安装Profiel 2.0mm，其他1.5-1.8mm |
| 包 | 纸箱，木箱，木托盘 |
| 运输 | 海，空，火车， |
| 邮寄日期 | 20-25天 |
| 帧 | 1.5mm SPCC钢 |
| 规范 | iso9001：2000，ce，rohs |
| HS编码 | 8517709000 |
| 类型 | IP55或IP65户外机柜 |
| 安装 | 组装/拆卸 |
| 容量 | 12u，17u，22u，27u，32u，37u，42u，47u |
| 材料 | SPCC冷轧钢 |
| 静态加载 | 1000-1500kgs |
| 商标 | 丝印，铝贴纸，橡皮贴 |
| 保护数据 | ip55或ip65 |
| 付款期限 | l / c，wu，t / t |
| 商标 | Webitelecomms |
| 起源 | 中国宁波 |
-------------------------------------------------- - - - - - - - 描述 - - - - - - - - - - - - - - - - - - -----------------------------------
*可靠的19'国际结构，双层隔板型
*带手柄锁的前面单实体金属门
*加强门铰链，操作角度为130度
*后单固体金属面板
*顶部带有2/8风扇，用于气流和冷却，风扇尺寸：120 * 120 * 38 mm * 38 mm38 mm
*顶部/底部有几个可锁定的接线孔，底部大孔的尺寸可调
*根据客户的特殊要求不同规格
*配1个照明系统，烟雾报警器，温度传感器
*宽度：600,800毫米
*深度：600,800mm
*高度：12u，17u，22u，27u，32u，37u，42u，47u
*可定制尺寸
*灵活的包装方式可方便放养和最终用户交货
-------------------------------------------------- --------------标准和材料--------------------------------- ------------------------
遵守
* ansi / eia，rs-310-d; iec297-2; din41491：part1; din41494：part7; gb / t3047.2-92标准和etsi标准。
*表面处理：脱脂，酸洗，防锈，杀菌，纯水清洗，静电粉末涂料*材质：SPCC冷轧钢或镀锌面板或不锈钢
*厚度：安装型材：2.0mm，其他：1.50mm
*知识产权学位：IP-55
*颜色：身体颜色：RAL5012（顶盖和底座）; RAL7035（其他）
-------------------------------------------------- - - - - - - - - - 参数 - - - - - - - - - - - - - - - - -------------------------------------
-------------------------------------------------- - - - - - - - - - - 规范 - - - - - - - - - - - - - - - ---------------------------------
-------------------------------------------------- ---------------作业条件--------------------------------- ------------------------
*必须受到保护：
- 机械损坏
- 处理不当
- 不同于橱柜的用途
*处理不当尤其如此：
- 超载（最大推荐负载超过）
- 可能会影响机柜或已安装设备的负面运行和功能的设备安装
- 更换机柜的结构或设计
-------------------------------------------------- ----------------安装柜------------------------------ ---------------------
*为确保最大推荐负载，必须均匀分配负载。
*将机柜放在平地面上，并使用调平脚调节任何差异。
*为了避免电缆穿过某些电缆开口的情况下的灰尘渗透，可以用一块面板进行密封
*可靠的19'国际结构，双层隔板型
*带手柄锁的前面单实体金属门
*加强门铰链，操作角度为130度
*后单固体金属面板
*顶部带有2/8风扇，用于气流和冷却，风扇尺寸：120 * 120 * 38 mm * 38 mm38 mm
*顶部/底部有几个可锁定的接线孔，底部大孔的尺寸可调
*根据客户的特殊要求不同规格
*配1个照明系统，烟雾报警器，温度传感器
*宽度：600,800毫米
*深度：600,800mm
*高度：12u，17u，22u，27u，32u，37u，42u，47u
*可定制尺寸
*灵活的包装方式可方便放养和最终用户交货
-------------------------------------------------- --------------标准和材料--------------------------------- ------------------------
遵守
* ansi / eia，rs-310-d; iec297-2; din41491：part1; din41494：part7; gb / t3047.2-92标准和etsi标准。
*表面处理：脱脂，酸洗，防锈，杀菌，纯水清洗，静电粉末涂料*材质：SPCC冷轧钢或镀锌面板或不锈钢
*厚度：安装型材：2.0mm，其他：1.50mm
*知识产权学位：IP-55
*颜色：身体颜色：RAL5012（顶盖和底座）; RAL7035（其他）
-------------------------------------------------- - - - - - - - - - 参数 - - - - - - - - - - - - - - - - -------------------------------------
没有。 | 项目 | 600宽 | 800wide | 物料 | 治疗 | 注意 |
1 | 帧 | 2 | 2 | 1.5mm SPCC钢 | 粉末涂料 | |
2 | 前门 | 1 | 1 | 固体金属 | / | 双壁式 |
3 | 侧门 | 0 | 0 | / | / | |
4 | 后门 | 1 | 1 | 固体金属 | / | 双壁式 |
5 | 锁 | 2 | 2 | / | / | 手柄锁 |
6 | 顶盖 | 1 | 1 | 1.5mm SPCC钢 | 粉末涂料 | |
7 | 后门板 | 1 | 1 | 1.5mm SPCC钢 | 粉末涂料 | |
8 | 风扇单元 | 1 | 1 | 1.2mm SPCC钢 | 粉末涂料 | |
9 | Ac风扇 | 2-8 | 2-8 | / | / | D> 800,6-8pcs8pcs |
10 | 底板 | 1 | 1 | spcc t = 2.0 | 粉末涂料 | |
11 | 接地螺栓 | 1 | 1 | spcc t = 1.5 | / | 25厘米 |
12 | 脚轮托盘 | / | / | spcc t = 2.5 | 粉末涂料 | |
13 | 脚轮 | / | / | / | / | |
14 | 可调脚 | / | / | / | / | |
15 | 安装角度 | 2 | 2 | spcc t = 1.5 | 粉末涂料 | |
16 | 19寸导轨 | 4 | 4 | spcc t = 2.0 | 粉末涂料 | |
17 | 电缆管理 | / | 2 | spcc t = 1.5 | 粉末涂料 | 只有800 W |
-------------------------------------------------- - - - - - - - - - - 规范 - - - - - - - - - - - - - - - ---------------------------------
| 项目编号 | 宽（MM） | 深（MM） | 高（MM） |
| wb-od-a 8614 | 800 | 600 | 1375 |
| wb-od-a 8814 | 800 | 800 | 1375 |
| wb-od-a 8616 | 800 | 600 | 1575 |
| wb-od-a 8816 | 800 | 800 | 1575 |
-------------------------------------------------- ---------------作业条件--------------------------------- ------------------------
*必须受到保护：
- 机械损坏
- 处理不当
- 不同于橱柜的用途
*处理不当尤其如此：
- 超载（最大推荐负载超过）
- 可能会影响机柜或已安装设备的负面运行和功能的设备安装
- 更换机柜的结构或设计
-------------------------------------------------- ----------------安装柜------------------------------ ---------------------
*为确保最大推荐负载，必须均匀分配负载。
*将机柜放在平地面上，并使用调平脚调节任何差异。
*为了避免电缆穿过某些电缆开口的情况下的灰尘渗透，可以用一块面板进行密封
| Model NO. | WB-OD-A |
| Usage | Network Integration System |
| Fan Number | Four |
| Certification | CE, ISO, RoHS, GS |
| Thickness | Mounting Profiel 2.0mm, Others 1.5-1.8mm |
| Package | Cartons, Wooden Case, Wooden Pallets |
| Shipping | Sea, Air, Train, |
| Delivery Date | 20-25 Days |
| Frame | 1.5mm SPCC Steel |
| Specification | ISO9001: 2000, CE, RoHS |
| HS Code | 8517709000 |
| Type | IP55 or IP65 Outdoor Cabinets |
| Installation | Assemble/Disassemble |
| Capacity | 12u, 17u, 22u, 27u, 32u, 37u, 42u, 47u |
| Material | SPCC Cold Rolled Steel |
| Static Loading | 1000-1500kgs |
| Logo | Silk Print, Aluminum Sticker, Rubber Sticker |
| Protection Data | IP55 or IP65 |
| Payment Term | L/C, Wu, T/T |
| Trademark | Webitelecomms |
| Origin | Ningbo, China |
----------------------------------------------------------------Description----------------------------------------------------------------------
*Reliable 19' international structure, Double wall typell type
*Front single solid metal door with handle lock
*Enhance door hinges with 130 degrees operation angle
*Rear single solid metal panel
*Top with 2/8 fans for airflow&cooling, fan size: 120*120*38 mm*38 mm38 mm
*Several lockable wiring holes on top/bottom, size of the large hole at the bottom adjustable
*Varies specification upon customers' special requirements
*with 1 pc of lighting system,smoke alarm,temperature sensor
*Width: 600,800 mm
*Depth: 600,800mm
*Height: 12U, 17U, 22U, 27U, 32U, 37U, 42U, 47U
*Customized size is available
*Flexible packing methods allows for convenient stocking and end user delivery
----------------------------------------------------------------Standard and Material---------------------------------------------------------
Comply with
*ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
*Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating *Material:SPCC cold rolled steel or Zink-plated panel or stainless steel
*Thickness:Mounting profile:2.0mm,others: 1.50mm
*IP degree: IP-55
*Color:Body color:RAL5012(Top cover and base);RAL7035(The others)
--------------------------------------------------------------------parameter--------------------------------------------------------------------
----------------------------------------------------------------------Specification--------------------------------------------------------------
-----------------------------------------------------------------Operation Conditions---------------------------------------------------------
*Must be protected against:
- Mechanical damage
- Improper handling
- A different usage than the cabinet is intended for
*Improper handling is especially:
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
------------------------------------------------------------------Installation of the cabinet---------------------------------------------------
*To ensure the maximum recommended load, it is necessary to distribute the load equally.
*Place the cabinet on a flat floor and adjust any differences using the levelling feet.
*To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blar
*Reliable 19' international structure, Double wall typell type
*Front single solid metal door with handle lock
*Enhance door hinges with 130 degrees operation angle
*Rear single solid metal panel
*Top with 2/8 fans for airflow&cooling, fan size: 120*120*38 mm*38 mm38 mm
*Several lockable wiring holes on top/bottom, size of the large hole at the bottom adjustable
*Varies specification upon customers' special requirements
*with 1 pc of lighting system,smoke alarm,temperature sensor
*Width: 600,800 mm
*Depth: 600,800mm
*Height: 12U, 17U, 22U, 27U, 32U, 37U, 42U, 47U
*Customized size is available
*Flexible packing methods allows for convenient stocking and end user delivery
----------------------------------------------------------------Standard and Material---------------------------------------------------------
Comply with
*ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
*Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating *Material:SPCC cold rolled steel or Zink-plated panel or stainless steel
*Thickness:Mounting profile:2.0mm,others: 1.50mm
*IP degree: IP-55
*Color:Body color:RAL5012(Top cover and base);RAL7035(The others)
--------------------------------------------------------------------parameter--------------------------------------------------------------------
NO. | Item | 600 wide | 800wide | Materials | Treatment | Note |
1 | Frame | 2 | 2 | 1.5mm SPCC steel | Powder coating | |
2 | Front Door | 1 | 1 | solid metal | / | double wall type |
3 | Side Door | 0 | 0 | / | / | |
4 | Back Door | 1 | 1 | solid metal | / | double wall type |
5 | Lock | 2 | 2 | / | / | Handle Lock |
6 | Top cover | 1 | 1 | 1.5mm SPCC steel | Powder coating | |
7 | Rear door panel | 1 | 1 | 1.5mm SPCC steel | Powder coating | |
8 | Fan unit | 1 | 1 | 1.2mm SPCC steel | Powder coating | |
9 | Ac fan | 2-8 | 2-8 | / | / | D﹥800,6-8pcs8pcs |
10 | Bottom panel | 1 | 1 | SPCC T=2.0 | Powder coating | |
11 | Earthing bolts | 1 | 1 | SPCC T=1.5 | / | 25 cm |
12 | Castors tray | / | / | SPCC T=2.5 | Powder coating | |
13 | Castors | / | / | / | / | |
14 | Ajustable feet | / | / | / | / | |
15 | Mounting angle | 2 | 2 | SPCC T=1.5 | Powder coating | |
16 | 19inch rails | 4 | 4 | SPCC T=2.0 | Powder coating | |
17 | Cable management | / | 2 | SPCC T=1.5 | Powder coating | Only for 800 W |
----------------------------------------------------------------------Specification--------------------------------------------------------------
| Item Number | Wide(MM) | Deep(MM) | High(MM) |
| WB-OD-A 8614 | 800 | 600 | 1375 |
| WB-OD-A 8814 | 800 | 800 | 1375 |
| WB-OD-A 8616 | 800 | 600 | 1575 |
| WB-OD-A 8816 | 800 | 800 | 1575 |
-----------------------------------------------------------------Operation Conditions---------------------------------------------------------
*Must be protected against:
- Mechanical damage
- Improper handling
- A different usage than the cabinet is intended for
*Improper handling is especially:
- Overloading (maximum recommended load exceeding)
- Device installation that can influence negatively operation and function of the cabinet or the installed equipment
- Change of the construction or design of the cabinet
------------------------------------------------------------------Installation of the cabinet---------------------------------------------------
*To ensure the maximum recommended load, it is necessary to distribute the load equally.
*Place the cabinet on a flat floor and adjust any differences using the levelling feet.
*To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blar
