包装和交货ivery
包装细节：内箱纸箱，外箱用于FL-D601插座恒温器
交货细节：您支付插座恒温器30天后
描述
电加热设备插件恒温器（碳晶板，电缆，电热膜加热器，电阻丝，电喷涂等）控制。产品采用进口MCU控制技术，收集室内温度，加热体控制输出，控制室温，达到恒温器的目的。
产品特点
控制电加热设备（碳晶板，电缆，电热膜加热器，电阻丝），管道阀
温度范围10ºC-40ºC（在室温下测量），0ºC-60ºC（外部探头测量体温，特殊要求0ºC-90ºC）要求0ºC-90ºC）90ºC)quirements 0ºC -90ºC)
操作手册
关：按电源按钮切换液晶显示屏显示室内温度。如果需要加热输出，屏幕右下角显示一个小太阳符号。
调节温度：上电按向上或向下键调整设定温度，液晶显示屏显示设定温度值。在室温下12秒钟后，没有按键自动返回状态显示。
定时启动：在关闭状态下，按M键显示闹钟时间，按向上或向下键进行调整，调整1-12小时的范围。屏幕时钟显示剩余时间。要取消定时器，请按开启键取消。
定时关机：在启动状态下，按M键显示闹钟时间，按向上或向下键进行调整，调整1-12小时的范围。 12秒后没有按键，显示屏自动返回到室温

Packaging & Deliveryliveryivery
Packaging Detail: Inner Paper box, Carton Outside for FL-D601 socket thermostat
Delivery Detail: 30 days after your payment for socket thermostat
Description
Plug-in thermostat for electric heating equipment (carbon crystal plate, electric cables, electric film heater, resistance wire, electric painting, etc.) control. The products imported MCU control technology, collecting indoor temperature, heating body control output to control room temperature, to achieve the purpose of the thermostat.
Product Features
control electric heating equipment (carbon crystal plate, electric cables, electric film heater, resistance wire), plumbing valves
Temperature range 10ºC -40 ºC (measured at room temperature), 0ºC -60ºC (external probes measuring body heat, special requirements 0ºC -90ºC)quirements 0ºC -90ºC)90ºC)quirements 0ºC -90ºC)
Operation manual
Off: Press the power button to switch the LCD screen displays the indoor temperature. If you need heating output, the lower right corner of the screen shows a small sun sign.
Adjust the temperature: the power on Press Up or Down keys to adjust the set temperature, the LCD screen displays the set temperature value. No keystrokes automatically return to the status display after 12 seconds at room temperature.
Regular boot: In the off state, press the M key to display the alarm time, press the Up or Down keys to adjust to adjust the range of 1-12 hours. Screen clock display the remaining time. To cancel the timer on, press the On key to cancel.
Timing shutdown: in the boot state, press the M key to display the alarm time, press the Up or Down keys to adjust to adjust the range of 1-12 hours. No keystrokes after 12 seconds the display automatically returns to room temperature