All Around Video Controller Box for 4 Camera (XY-3028)

All Around Video Controller Box for 4 Camera (XY-3028)

全周四视频控制器(XY-3028)

20+
19 USD
50+
18 USD
100+
17 USD

加入意向
型号。 XY-3028
解析度 控制箱
放置 仪表板
电压 12/24V
音频输出 数字音频同轴
系统工作电流 最大:50mA
工作温度 -20~80
商标 x&y oem; y oemY OEM
起源 广东广州
屏幕尺寸 控制箱
组合 蓝牙
证明 CE
支持格式 控制箱
视频输出 视频
系统信号 PAL / NTSC / SECAM
工作温度 -40~85
规范 CE
HS编码 8537109090
4通道输入专用于12〜24V车辆 摄像机控制箱,盲点辅助360观察摄像系统,每个摄像头配有镜子开关,帮助停车和实时监控
全方位车载摄像机控制箱(XY-3028)
描述:
视频输出:两个视频输出,一个用于汽车监视器,另一个用于车载DVR。
前视摄像头电源:由控制箱系统提供。
后视摄像机电源:由控制箱系统提供,或可通过反向灯电源供电。
左/右侧摄像机电源:由控制箱系统提供
功能:
自动后视图和前视图:
当您拉动倒档(左/右转没有触发)时,系统将激活显示器和后视摄像头,直到倒车档位,然后切换到前视摄像机10秒钟,然后关闭。
前视模式:
前视图由开关(包括)控制。按下控制开关2秒钟,汽车监视器和汽车前视摄像头将一直工作,如果没有其他触发器工作。然后再次按控制开关可以关闭前视图。
侧视模式:
按下控制开关小于1秒进入/退出侧视图模式。
当您打开转动开关时,该系统将激活监视器和侧视图摄像机(左/右侧视图摄像机由左/右转向灯控制)。转向完成后,显示器和相机将在1.5秒后关闭。
触发优先级:
左视图>后视图>右视图>前视图前视图
开关功能:
按下不到1秒钟:进入/退出侧视图模式
按2秒钟:前视图始终工作
参数:
系统工作电流:最大:50MA。 (不包括相机的工作电流)
系统工作电源:9-30V。 (摄像机的电源与系统输入电压相同,在24V车载,请使用24V摄像机)
系统信号:pal / ntsc / secam
视频输出:1.0VPP /75ΩΩOmega;Ω
工作温度:-20〜80℃
工作温度:-40〜85℃
打包清单:
控制箱* 1个
前视图控制开关* 1个
适配电缆* 6件
用户手册* 1pcs



工作电流: 10毫安
工作电压: 12v直流(8v〜16v)
重量: 120g
系统信号: PAL / NTSC
视频输出: 1.0vpp /75Ω5Ωmega;5Ω
工作温度: -20~80
工作温度: -40~85
欢迎所有客户选择我们的工厂,并快乐与所有海外业务
注意事项:我们严格的生产工艺,老化试验和质量控制,确保高品质生产。
我们建立了防水,防震,耐温性,
耐湿性,高清晰度。
竞争优势
质量稳定(CE FCC ROHS)
2.最有竞争力的价格
准时交货
良好的售后服务
5.所有产品必须逐个测试耐摔和耐高低温性能
6.保修期:16个月
7. OEM,ODM欢迎
广州X&Y电子有限公司于2005年在广州成立,是一家从事汽车摄像机系统,车载DVR摄像机研发,生产和销售的高新技术企业。我们保证准时交货,有竞争力的价格和及时的回应。我们欢迎您的询问,并期待在不久的将来与您建立长期的业务关系。r future.
------------------------------------------------------------------------------------------------------------------------------
公司电话:+ 86-20-29036269
公司传真:+ 86-20-87003595
公司名称:广州兴和电子有限公司 Ltd.
网址:http://www.xyglobal.cn
Model NO. XY-3028
Resolution Controller Box
Placement Dashboard
Voltage 12/24V
Audio Output Digital Audio Coaxial
The System Working Current Max: 50mA
Working Temperature -20~80
Trademark X&Y OEM;Y OEMY OEM
Origin Guang Dong Guang Zhou
Screen Size Controller Box
Combination Bluetooth
Certification CE
Support Format Controller Box
Video Output Video
System Signal PAL/NTSC/Secam
Operation Temperature -40~85
Specification CE
HS Code 8537109090
4 channel input special for 12~24V vehicle cameras control box ,blind spot assist 360 view camera system,with mirror switch for each camera,help parking and realtime monitoring
All round view car camera control box(XY-3028)
Description:
Video output: Two videos output, one for car monitor, the other for car DVR.
Front view camera power: Supplied by control box system.
Rear view camera power: Supplied by control box system, or could be supplied by reverse lamp power.
Left/Right side view camera power: Supplied by control box system
Functions:
1. Automatically rear view and front view:
When you pull the reverse gear (Left/Right turning no triggered), the system will activate the monitor and rear view camera till the reverse gear back, then switches to front view camera for 10 seconds then shut off.
2. Front view mode:
Front view controlled by switch(included). Press the control switch for 2 seconds, car monitor and car front view camera will be working all the time, if no other trigger working. And then you could shut off the front view video by press the control switch again.
3. Side view mode:
Press the control switch less than 1 second to enter/quit Side View Mode.
When you turn on the turning switch, this system will activate Monitor and Side view camera (Left/Right side view camera is controlled by Left/Right steering lamp). The monitor and camera will turn off after 1.5 seconds when steer turning is finished.
Trigger priority:
Left View﹥Back View﹥Right View﹥Front ViewFront View
Switch function:
Press for less than 1 second: Enter/Quit Side View mode
Press for 2seconds: Front View always working
Parameters:
The system working current: Max: 50MA. (Excludes working current of cameras)
The system working power: 9-30V. (Power supply to cameras is the same as the system input voltage, in 24V vehicle, please use 24V cameras)
System signal: PAL/NTSC/SECAM
Video output: 1.0VPP/75ΩΩOmega;Ω
Working temperature: -20~80
Operation Temperature: -40~85
Packing list:
Control box * 1pcs
Front view control switch *1pcs
Adapt cable *6pcs
User's manual *1pcs



Working current: 10mA
Working voltage: 12V DC (8V~16V)
Weight: 120g
System signal: PAL/NTSC
Video output: 1.0VPP/75Ω5Ωmega;5Ω
Working temperature: -20~80
Operation Temperature: -40~85
Welcomes All Customers Vistor Our Factory and Happy to do Business with all overseas
Note: We have strict producing process, aging test and QC to make sure high quality production.
We have established systematic production standard in waterproof, shockproof, temperature resistance,
Humidity resistance, high definition.
Competitive advantage
1. Stable quality (CE FCC ROHS)
2. Most competitive price
3. On time delivery
4. Good aftersales service
5. All products must test one by one wartproof resistance and high/low temperature resistance
6. Warranty: 16months
7. OEM, ODM welcome
Guangzhou X&Y Electronics Co., Ltd. Was established in Guangzhou in 2005. We are a hi-tech enterprise engaged in the R&D, production, and sale of car camera system, car DVR camera. We guarantee punctual delivery, competitive price and prompt response. We welcome your inquiries and look forward to establishing long-term business relationships with you in the near future.ar future.r future.
------------------------------------------------------------------------------------------------------------------------------
Company Phone: +86-20-29036269
Company Fax: +86-20-87003595
Company Name: Guangzhou X&Y Electronic Co., Ltd., Ltd. Ltd.
Website: http://www.xyglobal.cn