介绍：
我们的访问控制C3-100 / 200/400采用灵活开放的技术，提供对访问控制系统的管理，实时监控和控制 - 所有这些都来自浏览器，无需安装其他软件。我们的安全的Web托管基础设施和集中的在线管理降低了IT成本，并允许您轻松地在一个位置管理所有的接入点。 C3-400的多功能设计功能可以轻松，高效地照顾当前和未来的需求。它是市场上最坚固可靠的控制器之一，具有众多内置功能。 C3-400可以通过RS-485配置或以太网TCP / IP网络以38.4 Kbps进行通信。它可以存储多达30 000个持卡人。 SDK（软件开发工具包）可供客户将控制器集成到现有的访问控制软件中或开发新的软件。ftware.
特征：
有过流保护，过电压保护，电源和所有输入输出端子的反转保护...多硬件保护措施。与其他安全系统集成
C3-400可以与CCTV，火灾报警器，BAS（楼宇自动化系统）等系统的其他安全系统集成，配置总体安全系统。
支持不同的Wiegand阅读器
控制器支持不同的wiegand格式，可以连接到不同的读卡器，包括身份证读卡器，Mifare读卡器和HID读卡器等。
输入/输出端口到控制门
连接各种传感器，报警器，出口按钮，电锁等设备。
各种通讯功能
使用串行或TCP / IP通信，它提供可靠的网络系统
B / S结构软件
通过浏览器从客户端PC轻松管理系统。
第一次打孔卡后可以正常打开
门状态的实时监控
使用管理软件，可实时监控整个系统的门开启和关闭。
简单的访问控制系统配置
联锁功能
连接不同的门与一门是Open的特殊逻辑，其他门应该关闭。
多卡操作
此功能用于管理访客或管理一些特殊的高安全场所。当指定号码注册卡一起阅读时，门打开。
防反传
胁迫模式
SDK可用
系统集成商可以使用SDK将硬件集成到现有的访问控制软件系统中或开发新的软件。
规范：
模型
C3-400
中央处理器
32位mips cpu
随机存取存储器
32M位
闪存
256M位
卡容量
30, 000
事件缓冲区
100, 000
电源/电流
直流9.6v-14.4v，额定最大1A
维根读卡器端口
4ea（26bit Wiegand，8bit Burst for PIN）
通讯
rs485，tcp / ip
波特率
38，400bps（推荐）/ 9600bps，19,200bps，57,600bps（可选）
输入端口
12ea（退出按钮＃1，退出按钮＃2，按钮＃3，按钮＃4，门传感器＃1，门传感器＃2，门传感器＃3，门传感器＃4，辅助＃1，辅助＃2，辅助＃ 3，辅助＃4）
输出端口
4ea（4形式继电器输出，spdt 5a @ 36vdc / 8a @ 30vac）
4ea（4个辅助形式继电器输出，spdt 2a @ 30vdc）
LED指示灯
是，用于通信，电源，状态和穿孔卡的LED指示灯
工作温度
0°至+ 55°c55°cg; C55° C
工作湿度
10％至80％相对湿度无冷凝
尺寸（H * W * D）mm
218（W）* 106（H）（单板）
345（W）* 275（H）* 70（D）（带电源和金属盒）
证明
ce，fcc，rohs

Introduction:
Our access control C3-100/200/400 are built on flexible, open technology to provide management, real-time monitoring, and control of your access control system— All from a browser, with no additional software to install. Our secure Web-hosted infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location. C3-400's versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable controllers on the market, with a multitude of built-in features. The C3-400 can communicate at 38.4 Kbps via RS-485 configuration or Ethernet TCP/IP networks. It can store up to 30, 000 cardholders. SDK (Software Development Kit) is available for the customer to integrate the controller into existing access control software or to develop new software.ftware.ftware.
Features:
There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal...Multiple hardware protection measure. Integration with Other Security Systems
C3-400 can be integrated with other security systems such as CCTV, fire alarm, BAS(building automation system) and other systems to configure total security system.
Supports different Wiegand reader
The controller support different wiegand format, and can Connect to different reader, including ID card reader, Mifare card reader and HID reader etc.
Input/Output Ports to Control Doors
Connect with variety of sensors, alarms, exit buttons, electric lock and other devices.
Variety of Communication Function
Using either serial or TCP/IP communication, it provides reliable network system
B/S structure software
It is easy to manage the system by browser from client PC.
Normal open after first punch card can be setup
Real-time Monitoring of Door status
Using the management software, it allows real-time monitoring and control of door opening and closing of the whole system.
Simple Access Control System Configuration
Interlock function
Link different doors with special logic that one door is Open, others should be closed.
Multi-card operation
This function is used to manage visitors or to manage some special high secure place. The doors are opened when appointed number registered cards are read together.
Anti-Passback
Duress Mode
SDK available
The system integrator can use the SDK to integrate the hardware into their existing access control software system or to develop a new software.
Specification:
Model
C3-400
CPU
32bit MIPS CPU
RAM
32M bits
Flash Memory
256M bits
Card Capacity
30, 000
Event Buffer
100, 000
Power / Current
DC 9.6V-14.4V, Rated Max. 1A
Wiegand Reader Port
4ea (26bit Wiegand, 8bit Burst for PIN)
Communication
RS485, TCP/IP
Baud Rate
38, 400bps (Recommended) / 9600bps, 19, 200bps, 57, 600bps (selectable)
Input Port
12ea (Exit Button#1, Exit Button#2, Button#3, Button#4, Door Sensor#1, Door Sensor#2, Door Sensor#3, Door Sensor#4, Aux#1, Aux#2, Aux#3, Aux#4)
Output Port
4ea (4 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC)
4ea ( 4 Aux FORM-C Relay Output, SPDT 2A@30VDC)
LED Indicator
Yes, LED indication for communication, power, status and punch card
Operating Temperature
0° To +55° C55° Cg; C55° C
Operating Humidity
10% to 80% relative humidity non-condensing
Dimension (H*W*D)mm
218(W)*106(H)(single board )
345(W)*275(H)*70(D)(with power supply and metal box)
Certification
CE, FCC, RoHS