Portable Wireless WiFi Power Bank 4400mAh Capacity (OM-PW137)
便携式无线WiFi电源4400mAh容量（OM-PW137）
| 型号。 | OM-pw137 |
| 容量 | 2001-5000mAh |
| 携带方式 | 通用拆分 |
| 适用型号 | 手机，相机 |
| 显示 | 没有显示 |
| 证明 | ce，rohs，fcc |
| 可回收 | 可回收 |
| 颜色 | 黑色，银色，绿色，蓝色 |
| 重量 | 113G |
| 证书 | ce，rohs，fcc |
| 类型 | 旅行 |
| 商标 | 没有 |
| 起源 | 深圳广东 |
| 电池可拆卸 | 没有 |
| 兼容品牌 | 所有品牌手机 |
| 充电类型 | 电动 |
| 单元格类型 | 锂聚合物 |
| LED照明 | LED照明 |
| 插座类型 | 对于E.U. |
| 材料 | 塑料 |
| 尺寸 | 96X46X24mm |
| 保证 | 2年 |
| 电池类型 | 锂聚合物 |
| 使用 | 手机，相机 |
| 规范 | ce，rohs，fcc |
特征：
4400mAh的锂聚合物电池，连续工作4小时
支持Android平板电脑，智能手机等便携式数码产品的收费
支持分享手机流量，轻松实现多设备共享手机流量
支持中国移动，中国联通和中国电信分享WIFI热点
支持HSPA / HSPA +，EVDO A / B和TD-SCDMA无线网卡的EVDO
支持关机/启动对这些系列产品进行充电
支持WAN / LAN端口的ADSL，CATV宽带和自动识别切换的自动识别接入。马的能力
规范：
无线标准：IEEE802.11b / g / n
无线速率：150Mbps
3g模式：cdma2000，wcdma，td-scdma
电池容量：4400 / 5200mAh内置聚合物
无线存储：支持从U盘，可移动硬盘存储设备的无线共享
接口：
1×10/100米兰/万港口AN Port
1×USB 2.0端口0端口.0 Port
1×MicroUSB PortSB端口SB Port
按钮：
模式选择开关
电池检测按钮
复位按钮
指示符：
系统
电池电量
LOGO呼吸灯
天线：内置全向天线
操作模式：AP，3G路由器，无线路由器
无线安全：64/128位wep，wpa / wpa2，wpa / wpa2-personal（tkip / aes）
工作温度：0°C〜40°C（32°F〜104°F），例如： F〜104°F）; F)eg; F~104° F)
存储温度：-40°C〜70°C（-40°F〜158°F） F〜158°F）; F)eg; F~158° F)
相对湿度：10％〜90％，无冷凝
储存湿度：5％〜95％，无冷凝
尺寸：97（L）* 45（宽）* 25（高）毫米（长x宽x高）115克
用户指南：
如何给充电器充电
使用原装适配器，USB电缆和迷你USB连接器与充电器连接。它会开始收费。
如何知道剩余的力量。
按下按钮，LED指示灯将亮起，表示剩余电量。
如何使用充电器为数字设备充电。
1.为设备选择正确的连接器。
2.使用连接器和USB电缆连接充电器和设备。
3.按住按钮3秒钟，LED指示灯亮起，充电器开始充电。
4.充电后，按住按钮3秒钟关闭充电器，
5.仔细保留设备，以备将来使用。
警告：
1.仔细阅读这些说明，因为不正确使用锂离子电池可能会导致危险，例如过热，发烟，引火。
请在第一次使用手机充电器之前完全充电。
3.给电器充电前，请确认电器的电压。
4.不要掉落，敲击，拆卸或尝试自行修理充电器。
5.请勿将充电器浸入水中或使其潮湿。
6.请勿将充电器作为火源或加热器暴露于热源，
7.放在儿童接触不到的地方。
8.不要在有易燃气体的情况下使用。
产品照片：
4400mAh的锂聚合物电池，连续工作4小时
支持Android平板电脑，智能手机等便携式数码产品的收费
支持分享手机流量，轻松实现多设备共享手机流量
支持中国移动，中国联通和中国电信分享WIFI热点
支持HSPA / HSPA +，EVDO A / B和TD-SCDMA无线网卡的EVDO
支持关机/启动对这些系列产品进行充电
支持WAN / LAN端口的ADSL，CATV宽带和自动识别切换的自动识别接入。马的能力
规范：
无线标准：IEEE802.11b / g / n
无线速率：150Mbps
3g模式：cdma2000，wcdma，td-scdma
电池容量：4400 / 5200mAh内置聚合物
无线存储：支持从U盘，可移动硬盘存储设备的无线共享
接口：
1×10/100米兰/万港口AN Port
1×USB 2.0端口0端口.0 Port
1×MicroUSB PortSB端口SB Port
按钮：
模式选择开关
电池检测按钮
复位按钮
指示符：
系统
电池电量
LOGO呼吸灯
天线：内置全向天线
操作模式：AP，3G路由器，无线路由器
无线安全：64/128位wep，wpa / wpa2，wpa / wpa2-personal（tkip / aes）
工作温度：0°C〜40°C（32°F〜104°F），例如： F〜104°F）; F)eg; F~104° F)
存储温度：-40°C〜70°C（-40°F〜158°F） F〜158°F）; F)eg; F~158° F)
相对湿度：10％〜90％，无冷凝
储存湿度：5％〜95％，无冷凝
尺寸：97（L）* 45（宽）* 25（高）毫米（长x宽x高）115克
用户指南：
如何给充电器充电
使用原装适配器，USB电缆和迷你USB连接器与充电器连接。它会开始收费。
如何知道剩余的力量。
按下按钮，LED指示灯将亮起，表示剩余电量。
如何使用充电器为数字设备充电。
1.为设备选择正确的连接器。
2.使用连接器和USB电缆连接充电器和设备。
3.按住按钮3秒钟，LED指示灯亮起，充电器开始充电。
4.充电后，按住按钮3秒钟关闭充电器，
5.仔细保留设备，以备将来使用。
警告：
1.仔细阅读这些说明，因为不正确使用锂离子电池可能会导致危险，例如过热，发烟，引火。
请在第一次使用手机充电器之前完全充电。
3.给电器充电前，请确认电器的电压。
4.不要掉落，敲击，拆卸或尝试自行修理充电器。
5.请勿将充电器浸入水中或使其潮湿。
6.请勿将充电器作为火源或加热器暴露于热源，
7.放在儿童接触不到的地方。
8.不要在有易燃气体的情况下使用。
| 电力银行模式 | 手机充电电池 |
| 材料 | 塑料 |
| 颜色 | 黑色，银色，绿色，蓝色 |
| 尺寸 | 96x46x24mm |
| 容量 | 4400mAh的 |
| 电池 | 锂聚合物 |
| 输入 | micro usb 5v 1000ma |
| 出来 | 迷你5p直流5v / 1a |
| 支持界面 | Iphone4 / 4s / 5，Ipad1 / 2/3，HTC，三星，诺基亚和智能手机，数码相机 |
| Connestors | 一根电缆有三个连接器（迷你，微型，iPhone4） |
| 充电时间： | 3小时 |
| 保证： | 2年 |
| 证书： | CE，Rohs，FCC证书，MSDS，UN38.3测试报告。 |
产品照片：
| Model NO. | OM-PW137 |
| Capacity | 2001-5000mAh |
| Carrying Way | Universal Split |
| Applicable Models | Mobile Phone, Camera |
| Display | Without Display |
| Certification | CE, RoHS, FCC |
| Recyclable | Recyclable |
| Colour | Black, Silvery, Green, Blue |
| Weight | 113G |
| Certificate | CE, RoHS, FCC |
| Type | Travel |
| Trademark | No |
| Origin | Shenzhen Guangdong |
| Battery is Removable | No |
| Compatible Brand | All Brand Mobile |
| Charging Type | Electric |
| Cell Type | Li-Polymer |
| LED Lighting | LED Lighting |
| Socket Type | for E.U. |
| Material | Plastic |
| Dimension | 96X46X24mm |
| Warranty | 2 Years |
| Battery Type | Li-Polymer |
| Use | Mobile Phone, Camera |
| Specification | CE, RoHs, FCC |
Feature:
4400mAh of li-polymer battery, continuos working for 4 hours
Support the charge for Android panel computer, smart phone and other portable digital products
Support to share the flow of phone, easily to achieve muti-devices to share the phone flow
Support to share the access of WIFI hotspot for China Mobile, China Unicom and China Telecom
Support EVDO of HSPA/HSPA+, EVDO A/B and TD-SCDMA wireless network card
Support shutdown/boot-strap to charge these series of products
Support the automatic recognition access for ADSL, CATV broadband and automatic recognition switiching for the port of WAN/LAN. Mah capacity
Specification:
Wireless Standard: IEEE802.11b/g/n
Wireless Rate: 150Mbps
3G Mode: CDMA2000, WCDMA, TD-SCDMA
Battery Capacity: 4400/5200mAh Built in Polymer
Wireless Storage: Support Wireless Share from U disk, removable hard disk storage devices
Interface:
1× 10/100M LAN/WAN PortAN PortAN Port
1× USB 2.0 Port.0 Port.0 Port
1× MicroUSB PortSB PortSB Port
Button:
Mode Selector Switch
Battery Detection Button
Reset Button
Indicator:
System
Battery Level
LOGO Breathing Lights
Antenna: Built-in omni-directional antenna
Operation Mode: AP, 3G Router, Wireless Router
Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA /WPA2-Personal (TKIP/AES)
Operating Temperature: 0° C~40° C (32° F~104° F)eg; F~104° F); F)eg; F~104° F)
Storage Temperature: -40° C~70° C (-40° F~158° F)eg; F~158° F); F)eg; F~158° F)
Relative Humidity: 10% ~ 90%, Non-condensing
Storage Humidity: 5%~95%, Non-condensing
Dimensions: 97(L)*45(W)*25(H)mm (L x W x H) 115g
User Guide:
How to Charge the potable charger.
Use the original adapter, USB cable and mini USB connector, to connect with the charger. It would begin to charge.
How to know the remain power.
Press the button, LED lights will turn on to indicate the remain power.
How to charge digital devices with the charger.
1. Choose the correct connector for the device.
2. Connect the charger and device with the connector and USB cable.
3. Keep pressing the button for 3 seconds, LED lights turn on, the charger begins to charge.
4. After charging, keep pressing the button for 3 seconds to turn off the charger,
5. Keep the units carefully for the future using.
Caution:
1. Pls read these instructions carefully as incorrect use of Li-ion batteries may lead to dangers such as overheating, fuming, catching fire.
2. Please charger the mobile charger completely before the first time using it.
3. Before charging the electric device, please confirm the voltage of the electric device.
4. Don't drop, knock, disassemble or attempt to repair the charger by yourself.
5. Don't immerse the charger in water or make it wet.
6. Don't expose the charger to a heat source as fire or heater,
7. Keep out of reach of children.
8. Don't use in the presence of flammable gas.
Product photos:
4400mAh of li-polymer battery, continuos working for 4 hours
Support the charge for Android panel computer, smart phone and other portable digital products
Support to share the flow of phone, easily to achieve muti-devices to share the phone flow
Support to share the access of WIFI hotspot for China Mobile, China Unicom and China Telecom
Support EVDO of HSPA/HSPA+, EVDO A/B and TD-SCDMA wireless network card
Support shutdown/boot-strap to charge these series of products
Support the automatic recognition access for ADSL, CATV broadband and automatic recognition switiching for the port of WAN/LAN. Mah capacity
Specification:
Wireless Standard: IEEE802.11b/g/n
Wireless Rate: 150Mbps
3G Mode: CDMA2000, WCDMA, TD-SCDMA
Battery Capacity: 4400/5200mAh Built in Polymer
Wireless Storage: Support Wireless Share from U disk, removable hard disk storage devices
Interface:
1× 10/100M LAN/WAN PortAN PortAN Port
1× USB 2.0 Port.0 Port.0 Port
1× MicroUSB PortSB PortSB Port
Button:
Mode Selector Switch
Battery Detection Button
Reset Button
Indicator:
System
Battery Level
LOGO Breathing Lights
Antenna: Built-in omni-directional antenna
Operation Mode: AP, 3G Router, Wireless Router
Wireless Security: 64/128-bit WEP, WPA/WPA2, WPA /WPA2-Personal (TKIP/AES)
Operating Temperature: 0° C~40° C (32° F~104° F)eg; F~104° F); F)eg; F~104° F)
Storage Temperature: -40° C~70° C (-40° F~158° F)eg; F~158° F); F)eg; F~158° F)
Relative Humidity: 10% ~ 90%, Non-condensing
Storage Humidity: 5%~95%, Non-condensing
Dimensions: 97(L)*45(W)*25(H)mm (L x W x H) 115g
User Guide:
How to Charge the potable charger.
Use the original adapter, USB cable and mini USB connector, to connect with the charger. It would begin to charge.
How to know the remain power.
Press the button, LED lights will turn on to indicate the remain power.
How to charge digital devices with the charger.
1. Choose the correct connector for the device.
2. Connect the charger and device with the connector and USB cable.
3. Keep pressing the button for 3 seconds, LED lights turn on, the charger begins to charge.
4. After charging, keep pressing the button for 3 seconds to turn off the charger,
5. Keep the units carefully for the future using.
Caution:
1. Pls read these instructions carefully as incorrect use of Li-ion batteries may lead to dangers such as overheating, fuming, catching fire.
2. Please charger the mobile charger completely before the first time using it.
3. Before charging the electric device, please confirm the voltage of the electric device.
4. Don't drop, knock, disassemble or attempt to repair the charger by yourself.
5. Don't immerse the charger in water or make it wet.
6. Don't expose the charger to a heat source as fire or heater,
7. Keep out of reach of children.
8. Don't use in the presence of flammable gas.
| Power bank model | mobile rechargeable battery |
| Material | Plastic |
| Color | Black, Silvery, Green, Blue |
| Dimension | 96x46x24mm |
| Capacity | 4400mah |
| Battery | Lithium polymer |
| Input | Micro USB 5V 1000mA |
| Out put | Mini 5p DC 5V/1A |
| Support interface | Iphone4/4s/5,Ipad1/2/3 ,HTC ,Samsung ,Nokia and Smart phone, Digital Camera |
| Connestors | One cable with three connectors(mini,micro,iPhone4) |
| Charge time: | 3 hours |
| Warranty: | 2 years |
| Certificates: | CE, Rohs, FCC certificates, MSDS, UN38.3 testing report. |
Product photos:
