High Capacity Rechargeable Lithium Ion Lipolymer Battery
高容量可充电锂离子聚合物电池
议价
加入意向| 型号。 | 656090 |
| 连接方式 | 系列和并行 |
| 放电率 | 中等放电率 |
| 配件类型 | 电池 |
| 标准电压 | 1.5v〜4.8v1.5v〜4.8v |
| 电解液 | 酸 |
| 规范 | 603450 |
| HS编码 | 85078020 |
| 类型 | 锂聚合物电池组 |
| 充电 | 收费 |
| 尺寸 | 中 |
| 额定容量 | > 1000mah00mah |
| 用法 | 电子产品 |
| 商标 | UPT品牌 |
| 起源 | 中国广东省 |
3.7V，4000mAh锂离子电池
型号可充电锂电池
标称电压3.7V
容量1100mah
外套PVC收缩管
规范：
充电电压：4.25V
放电截止电压：2.75V
标准充电：0.2C / 4.2V
最大充电：1.0C / 4.2V
标准放电：0.2C / 3.0V
最大放电：连续放电：1.0C / 3.0V非连续放电：2.0C / 3.0V
重量：约70g
运输电压： ≥≥ge;≥3.85
工作温度：充电：0ºC-45ºCC-45ºCrdm;CC-45ºC
放电：-20ºC-60ºC; C-60ºCdm;C;C-60ºC
存储（在50％SOC和指定的可恢复容量，以％VS时间）
-10ºC〜25ºC（12个月≥85％）-10ºC〜45ºC（6个月≥85％）C〜45ºC（6个月≥85％）≥85%)C~45ºC(6months≥85%)
-10ºC〜55ºC（1个月≥90％）月≥90％）0%)months≥90%)
推荐的储存温度为20 +-5ºC。ture .
目视检查：细胞表面不应有任何明显的划痕，裂纹，螺栓，烧灼，变形，肿胀，渗漏等现象
参考标准：GB / T 18287-2013。 IEC62133，UL1642
主要特点：能量密度高，容量小，重量轻，安全可靠（带PCM），循环寿命长，无记忆，环保，性能稳定，价格合理，容量大，尺寸可以
保护性能：包含PTC热熔丝
循环寿命（80％主要容量）： >500cycles
型号可充电锂电池
标称电压3.7V
容量1100mah
外套PVC收缩管
规范：
充电电压：4.25V
放电截止电压：2.75V
标准充电：0.2C / 4.2V
最大充电：1.0C / 4.2V
标准放电：0.2C / 3.0V
最大放电：连续放电：1.0C / 3.0V非连续放电：2.0C / 3.0V
重量：约70g
运输电压： ≥≥ge;≥3.85
工作温度：充电：0ºC-45ºCC-45ºCrdm;CC-45ºC
放电：-20ºC-60ºC; C-60ºCdm;C;C-60ºC
存储（在50％SOC和指定的可恢复容量，以％VS时间）
-10ºC〜25ºC（12个月≥85％）-10ºC〜45ºC（6个月≥85％）C〜45ºC（6个月≥85％）≥85%)C~45ºC(6months≥85%)
-10ºC〜55ºC（1个月≥90％）月≥90％）0%)months≥90%)
推荐的储存温度为20 +-5ºC。ture .
目视检查：细胞表面不应有任何明显的划痕，裂纹，螺栓，烧灼，变形，肿胀，渗漏等现象
参考标准：GB / T 18287-2013。 IEC62133，UL1642
主要特点：能量密度高，容量小，重量轻，安全可靠（带PCM），循环寿命长，无记忆，环保，性能稳定，价格合理，容量大，尺寸可以
保护性能：包含PTC热熔丝
循环寿命（80％主要容量）： >500cycles
| Model NO. | 656090 |
| Connection Mode | Series and Parallel |
| Discharge Rate | Medium Discharge Rate |
| Accessories Type | Battery |
| Standard Voltage | 1.5V~ 4.8V1.5V~ 4.8V |
| Electrolyte | Acid |
| Specification | 603450 |
| HS Code | 85078020 |
| Type | Lithium-Polymer Battery Pack |
| Rechargeable | Chargeable |
| Size | Medium |
| Rated Capacity | ﹥1000MAH00MAH |
| Usage | Electronics Products |
| Trademark | UPT brand |
| Origin | Guangdong Province, China |
3.7V ,4000mAh Li-ion battery
Model No. Rechargeable lithium battery
Nominal Voltage 3.7V
Capacity 1100mah
Jacket PVC Shrink tube
Specification:
Charging voltage: 4.25V
Discharging cut-off voltage: 2.75V
Standard charging: 0.2C/4.2V
Max charging: 1.0C/4.2V
Standard discharging: 0.2C/3.0V
Max discharging: Continuous discharge: 1.0C/3.0V Non-continuous discharge: 2.0C/3.0V
Weight: Appr: 70g
Shipping voltage: ≥≥ge;≥3.85
Operation Temperature: Charge: 0ºC-45ºCC-45ºCrdm;CC-45ºC
Discharge: -20ºC-60ºC;C-60ºCdm;C;C-60ºC
Storage(At 50% SOC and specified temp recoverable capacity in % VS time)
-10ºC~25ºC (12months≥85%) -10ºC~45ºC(6months≥85%)C~45ºC(6months≥85%)≥85%)C~45ºC(6months≥85%)
-10ºC~55ºC (1months≥90%)months≥90%)0%)months≥90%)
20+-5ºC is the recommended storage temperature .ture .ture .
Visual inspection: There should not be any remarkable scratches,cracks, bolts, cauterization,deformations, swelling,leakage, and so on the surface of the cell
Reference standard: GB/T 18287-2013. IEC62133,UL1642
Main Characteristics: High energy density, good capacity, light and thin, safe and reliable(with PCM),long circle life,no memory, environmental , stable performance, reasonable low price, capacity and size could be
Protect Performance: Contain PTC heat-fuse
Cycle Life(80% prime capacity): >500cycles
Model No. Rechargeable lithium battery
Nominal Voltage 3.7V
Capacity 1100mah
Jacket PVC Shrink tube
Specification:
Charging voltage: 4.25V
Discharging cut-off voltage: 2.75V
Standard charging: 0.2C/4.2V
Max charging: 1.0C/4.2V
Standard discharging: 0.2C/3.0V
Max discharging: Continuous discharge: 1.0C/3.0V Non-continuous discharge: 2.0C/3.0V
Weight: Appr: 70g
Shipping voltage: ≥≥ge;≥3.85
Operation Temperature: Charge: 0ºC-45ºCC-45ºCrdm;CC-45ºC
Discharge: -20ºC-60ºC;C-60ºCdm;C;C-60ºC
Storage(At 50% SOC and specified temp recoverable capacity in % VS time)
-10ºC~25ºC (12months≥85%) -10ºC~45ºC(6months≥85%)C~45ºC(6months≥85%)≥85%)C~45ºC(6months≥85%)
-10ºC~55ºC (1months≥90%)months≥90%)0%)months≥90%)
20+-5ºC is the recommended storage temperature .ture .ture .
Visual inspection: There should not be any remarkable scratches,cracks, bolts, cauterization,deformations, swelling,leakage, and so on the surface of the cell
Reference standard: GB/T 18287-2013. IEC62133,UL1642
Main Characteristics: High energy density, good capacity, light and thin, safe and reliable(with PCM),long circle life,no memory, environmental , stable performance, reasonable low price, capacity and size could be
Protect Performance: Contain PTC heat-fuse
Cycle Life(80% prime capacity): >500cycles
