10 Port Network Switch with 8*100m SFP and 2 Giga RJ45 Port Optical Fiber Switch 8 Port SFP Switch
10端口网络交换机，带8 * 100m SFP和2 Giga RJ45端口光纤交换机8端口SFP交换机
| 型号。 | ts0802fg |
| 类型 | 以太网交换机 |
| 端口 | 8sfp + 2TX |
| 应用 | 企业，苏荷 |
| 港口结构 | 模块化 |
| 建筑 | 横杆系统 |
| 商标 | phynam |
| 起源 | 东莞广东中国 |
| 通讯模式 | 全双工和半双工双机uplex |
| 传输速率 | 100Mbps的 |
| 端口号码 | 8 100m SFP和2 10/100 / 1000m Tx |
| 转移率 | 10/100 / 1000Mbps的 |
| 性能 | 非线速路由器 |
| 网络 | 以太网Csma / CD |
| 规范 | ce / emc，ce / lvd，fcc认证 |
| HS编码 | 85176219 |
10端口网络光纤交换机，8端口100M SFP和2端口10/100 / 1000Mbps RJ45全千兆L2交换机
概观
TS0802FG 10端口千兆以太网光纤交换机具有8端口100M SFP插座和2个10/100 / 1000M UTP端口。客户可根据需要选择不同的100M SFP模块，如多模或单模，单纤或双纤，单模20-100km等。产品性能稳定，品质优良，价格合理。适用于构建光纤以太网。
特征
8个带2个RJ45接口的SFP插座可选全吉比特。
自动协商功能支持自动10/100 / 1000M的UTP端口和全双工/半双工。
SFP插槽支持100M和全双工模式。
流量控制; IEEE802.3X全双工;半双工背压
所有端口支持线速切换，支持大帧传输。
功耗低（15W），热量低，可靠性好。
操作标准：IEEE802.3 / u / z / ab，10Base-T，100Base-T，1000Base-T和1000Base-X。
MAC地址表：8K
LED指示灯监控工作状态，帮助故障分析
开关容量：5.6G
眼镜
产品图片
概观
TS0802FG 10端口千兆以太网光纤交换机具有8端口100M SFP插座和2个10/100 / 1000M UTP端口。客户可根据需要选择不同的100M SFP模块，如多模或单模，单纤或双纤，单模20-100km等。产品性能稳定，品质优良，价格合理。适用于构建光纤以太网。
特征
8个带2个RJ45接口的SFP插座可选全吉比特。
自动协商功能支持自动10/100 / 1000M的UTP端口和全双工/半双工。
SFP插槽支持100M和全双工模式。
流量控制; IEEE802.3X全双工;半双工背压
所有端口支持线速切换，支持大帧传输。
功耗低（15W），热量低，可靠性好。
操作标准：IEEE802.3 / u / z / ab，10Base-T，100Base-T，1000Base-T和1000Base-X。
MAC地址表：8K
LED指示灯监控工作状态，帮助故障分析
开关容量：5.6G
眼镜
模型 | ts0802fg | |
港口 | 1000m rj45 | 2 |
100m sfp | 8 | |
性能 | 存储和转发 | 支持 |
容量 | 5.6G | |
苹果电脑 | 8K | |
环境 | 工作温度：0〜40℃ 储存温度：-40〜70℃ | |
工作湿度：10％ - 90％RH无冷凝 存放湿度：5％ - 90％RH无冷凝 | ||
输入功率 | dc12v 2a交流输入110〜220v 50 / 60hz | |
协议和标准 | ieee 802.3 ieee 802.3i 10base-t ieee 802.3u 100base-tx ieee 802.3ab 1000base-t ieee 802.3z 1000base-x ieee 802.3x | |
数据传输率 | Ethernet10Mbps半双工，20Mbps全双工 快速以太网：100Mbps半双工，200Mbps全双工 Gbit以太网：2000Mbps全双工 | |
网络媒介 | 10Base-T：Cat3或以上UTP / STP（≤100m）00m）00m) 100Base-TX：Cat5或以上UTP / STP（≤100m）00m）00m) 1000Base-T：Cat5e以上UTP / STP（≤100m）00m）00m) 100Base-SX：62.5μm/50μmMMF（2m〜2km）2m〜2km）2m~2km) 100Base-LX：62.5μm/50μmMMF（2m〜20m）或9μmSMF（2m〜80km）（2m〜80km） (2m~80km) | |
物理规格 | 产品尺寸：225mm * 105mm * 32mm（长*宽*高） 包装尺寸：300mm * 175mm * 100mm（长*宽*高） 重量：1kg | |
产品图片
| Model NO. | TS0802FG |
| Type | Ethernet Switch |
| Ports | 8SFP+2tx |
| Application | Enterprise, Soho |
| Port Structure | Modular |
| Architecture | Crossbar System |
| Trademark | PHYNAM |
| Origin | Dongguan Guangdong China |
| Communication Mode | Full-Duplex & Half-DuplexDuplexuplex |
| Transmission Rate | 100Mbps |
| Port Number | 8 100m SFP and 2 10/100/1000m Tx |
| Transfer Rate | 10/100/1000Mbps |
| Performance | Non Line Speed Router |
| Network | Ethernet Csma/CD |
| Specification | CE/EMC, CE/LVD, FCC Certification |
| HS Code | 85176219 |
10 ports network Fiber Switch with 8 port 100M SFP and 2 port 10/100/1000Mbps RJ45 full gigabit L2 switch
Overview
TS0802FG 10 ports Gigabit Ethernet Optical Fiber Switch has 8ports 100M SFP sockets and two 10/100/1000M UTP ports. Customer can choose different 100M SFP module according as his demand, such as Multimode or Single-mode, Single fiber or Dual fiber and Single-mode 20-100km etc. The product is possessed of stable performance, excellent quality and reasonable price. It is applicable to use in constructing of Optical Fiber Ethernet network.
Feature
8 SFP sockets with 2 RJ45 interface optional full gigabit.
Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
The SFP slot supports 100M and Full Duplex mode.
Flow control; IEEE802.3X for Full Duplex; Back pressure for half-duplex
All ports support line speed switching, support big frame transmission.
It is low power consume (15W), low heat, and good reliability.
Operating standards: IEEE802.3/u/z/ab, 10Base-T, 100Base-T, 1000Base-T and 1000Base-X.
MAC address table: 8K
LED indicator monitoring work state and help fault analysis
Switching capacity: 5.6G
Specs
Products Photo
Overview
TS0802FG 10 ports Gigabit Ethernet Optical Fiber Switch has 8ports 100M SFP sockets and two 10/100/1000M UTP ports. Customer can choose different 100M SFP module according as his demand, such as Multimode or Single-mode, Single fiber or Dual fiber and Single-mode 20-100km etc. The product is possessed of stable performance, excellent quality and reasonable price. It is applicable to use in constructing of Optical Fiber Ethernet network.
Feature
8 SFP sockets with 2 RJ45 interface optional full gigabit.
Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
The SFP slot supports 100M and Full Duplex mode.
Flow control; IEEE802.3X for Full Duplex; Back pressure for half-duplex
All ports support line speed switching, support big frame transmission.
It is low power consume (15W), low heat, and good reliability.
Operating standards: IEEE802.3/u/z/ab, 10Base-T, 100Base-T, 1000Base-T and 1000Base-X.
MAC address table: 8K
LED indicator monitoring work state and help fault analysis
Switching capacity: 5.6G
Specs
Model | TS0802FG | |
Port | 1000M Rj45 | 2 |
100M SFP | 8 | |
Performance | Store and forward | Support |
Capacity | 5.6G | |
MAC | 8K | |
Environment | Work Temp.: 0~40 Store Temp: -40~70 | |
Working Humidity: 10%--90% RH non-condensing Store humidity: 5%--90% RH non-condensing | ||
Input power | DC12V 2A AC input 110~220V 50/60HZ | |
Protocol and standard | IEEE 802.3 IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x | |
Data transfer rate | Ethernet10Mbps half-duplex, 20Mbps full duplex Fast Ethernet:100Mbps half-duplex, 200Mbps full duplex Gbit Ethernet:2000Mbps full duplex | |
Network Medium | 10Base-T:Cat3 or above UTP/STP(≤100m)00m)00m) 100Base-TX: Cat5 or above UTP/STP(≤100m)00m)00m) 1000Base-T: Cat5e or above UTP/STP(≤100m)00m)00m) 100Base-SX:62.5μm/50μm MMF(2m~2km)2m~2km)2m~2km) 100Base-LX:62.5μm/50μm MMF(2m~20m) or 9μm SMF (2m~80km) (2m~80km) (2m~80km) | |
Physical Specifications | Product Size: 225mm*105mm*32 mm(L*W*H) Package Size: 300mm*175mm*100mm(L*W*H) Weight:1kg | |
Products Photo
