Li-ion Lithium Ion Battery Pack 25.9V/2.6ah

Li-ion Lithium Ion Battery Pack 25.9V/2.6ah

锂离子锂离子电池组25.9V / 2.6ah

30+
10-15 USD

加入意向
型号。 uptb31
连接方式 系列和并行
放电率 低放电率
配件类型 电池
标准电压 >12V
电解液
规范 L128 * W68 * h24mm
HS编码 85078020
类型 锂离子电池组
充电 收费
尺寸
额定容量 > 1000mah00mah
用法 电子产品
商标 UPT品牌
起源 中国
锂离子电池组25.9V / 2.6Ah用于存储电力使用
产品描述
18650 / 7S1P锂离子电池组25.9V / 2.6Ah
型号:ay-l07s01-069
LTEM 规范 备注
标称容量 2.6Ah 三星18650 3.7V 2600mAh
标称电压 25.9V 3.7V / 1Cell
充电电压 29.4V±0.05vmn; 0.05Vmn;0.05V 4.2V / 1Cell
充电方式 CC / CV (恒定电流和有限电流
标准充电时间 2000毫安/7小时,3000毫安/4.5小时 电池容量÷充电电流×1.5rent×1.5es;1.5rent×1.5
充电电流 1300毫安(0.5C) 0〜+40ºCordm; C ^ordm;C
最大充电电流 2600毫安(1c)中 0〜+40ºCordm; C ^ordm;C
连续放电电流 2.6A(1C) -20〜+60ºCordm; C ^ordm;C
放电截止电压 2.5V 2.5V / LCELL
短路保护 外部短路 自动恢复
电阻值 ≤200mΩ00mΩOmega;00mΩ 交流阻抗1kHz
循环生活 ≥500; 500;500
工作温度 标准收费
0〜+40ºCordm; C ^ordm;C
标准放电 -20〜+60ºCordm; C ^ordm;C
外形尺寸 L128 * W68 * h24mm 长x宽x高
预接线 红色=正极,黑色=负
保护电路模块:PCM-L08S10-877
最大连续充电电流 8A
最大连续放电电流 8A
过充电检测电压 4.25V±0.025vn; 0.025Vn;0.025V 单细胞
过充电释放电压 4.15V±0.05vmn; 0.05Vmn;0.05V 单细胞
过充电检测延迟时间 0.5秒,1.5秒 单细胞
过放电检测电压 2.50V±0.08vmn; 0.08Vmn;0.08V 单细胞
过放电释放电压 3.0±0.10Vmn; 0.10Vmn;0.10V 单细胞
过放电检测延时时间 50-150mS 单细胞
过电流检测 15±2Alusmn; 2Alusmn;2A 可以调整
过流延时时间 5-15mS

Model NO. UPTB31
Connection Mode Series and Parallel
Discharge Rate Low Discharge Rate
Accessories Type Battery
Standard Voltage >12V
Electrolyte Lithium
Specification L128*W68*H24mm
HS Code 85078020
Type Lithium-Ion Battery Pack
Rechargeable Chargeable
Size Medium
Rated Capacity ﹥1000MAH00MAH
Usage Electronics Products
Trademark UPT Brand
Origin China
Li-ion battery Pack 25.9V/2.6Ah for storage power use
Product Description
18650/7S1P Li-ion battery Pack 25.9V/2.6Ah
Model: AY-L07S01-069
ltem Specification Remark
Nominal capacity 2.6Ah Samsung 18650 3.7V 2600mAh
Nominal voltage 25.9V 3.7V/1Cell
Charging voltage 29.4V±0.05Vmn;0.05Vmn;0.05V 4.2V/1Cell
Charging method CC/CV (Constant-current and-Voltage with Limited current
Standard charging time 2000mA/7hour,3000mA/4.5hour Battery capacity÷charging current×1.5rent×1.5es;1.5rent×1.5
Charging current 1300mA(0.5C) 0~+40ºCordm;Cordm;C
Maximum charging current 2600mA(1C) 0~+40ºCordm;Cordm;C
Continuous discharge current 2.6A(1C) -20~+60ºCordm;Cordm;C
Discharge cutoff voltage 2.5V 2.5V/lCell
Short circuit protection Exterior short circuit Automatic recovery
Intermal resistance ≤200mΩ00mΩOmega;00mΩ AC lmpedance 1kHz
Cycle life ≥500;500;500
Operating temperature Standard Charge
0~+40ºCordm;Cordm;C
Standard Discharge -20~+60ºCordm;Cordm;C
Outline dimension L128*W68*H24mm Length x wide x height
Pre-wired Red=Positive,Black=Negative
Protection Circuit Module: PCM-L08S10-877
Maximal continuous charging current 8A
Maximal continuous Discharging current 8A
Over-charge detection voltage 4.25V±0.025Vn;0.025Vn;0.025V Single cell
Over-charge release voltage 4.15V±0.05Vmn;0.05Vmn;0.05V Single cell
Over-charge detection delay time 0.5S-1.5S Single cell
Over-discharge detection voltage 2.50V±0.08Vmn;0.08Vmn;0.08V Single cell
Over-discharge release Voltage 3.0±0.10Vmn;0.10Vmn;0.10V Single cell
Over-discharge detection delaytime 50-150mS Single cell
Over-current detection 15±2Alusmn;2Alusmn;2A can adjust
Over-current delay time 5-15mS