USB Keyboard Controller (EV-KB312-USB)
USB键盘控制器（EV-KB312-USB）
| 型号。 | EV-kb312-USB |
| 结构体 | 组合 |
| 信号 | 连续 |
| 证明 | rohs，ccc，iso：9001，sgs，ce |
| 定制 | 定制 |
| 商标 | eyevison |
| 起源 | 深圳中国 |
| 任务 | 以下 |
| 数学模型 | 线性 |
| 功能 | 自动控制 |
| 条件 | 新 |
| 材料 | 铝合金 |
| 规范 | 490 * 265 * 170（mm）3Kg |
| HS编码 | 8525801390 |
IP键盘控制器（EV-KB3）
1.1说明
网络键盘采用工业级液晶显示模块，具有更好的显示效果。
2.支持Onvif协议，良好的兼容性，高可扩展性，内置Web服务器，使配置界面简洁，易于使用，易于控制IP摄像头。
1.2产品特点
支持ONVIF协议
支持离线搜索和添加设备
支持多品牌ip PTZ摄像头
支持运行预设 巡逻和模式
支持设置配置参数
4D操纵杆
1.3连接图
键盘和相机之间的连接在 同一个LAN，并确保IP地址的网段一致，如192.168.1.123和192.168.1.111属于同一网段; 192.168.1.123和192.168.0.125不是，此时您需要修改IP键盘或相机的地址。键盘获取IP的默认模式是动态获取。
1.4技术规格
2.安装和设置
2.1连接和着陆
将键盘与电源连接，并连接网线。当键盘启动时，屏幕显示本地IP 192.168.x.xxx，在浏览器中输入IP地址，您可以进入该页面默认用户名：admin;密码为空
2.2搜索和添加
使用键盘添加LAN设备
1.设备通常获取IP 请按键盘上的“搜索”按钮。
2.设备将自动显示LAN中支持ONVIF协议的所有设备 完成搜索后。
3.通过操纵杆向上和向下翻页以选择所需的设备，然后按添加。
4.当您添加设备时，需要输入当前的用户名和密码，不同的相机具有鲜明的特征。
5.输入后按“保存”按钮进行保存。
6.添加设备时，可以使用多个设备 不断加入
2.3查询和控制
1.按“搜索”按钮查看添加的设备。设备。
2.按“Enter”按钮选择相应的device.ing设备。
3.当屏幕显示“目的地IP：192.168.x.xxx”时，表示连接成功。然后可以操作PTZrolling PTZ ，缩放等等。
4.当屏幕显示“离线设备”时，请检查LAN中LAN.mal的设备连接是否正常。
5.屏幕显示“用户名”或“密码错误”请检查添加的设备的用户名和密码是否正确。正确与否
3. Web配置
3.1主页
1.使用显示的键盘的IP地址，并通过浏览器进行访问。
2.默认用户名：admin;密码为空
3.输入设备的主页面，屏幕显示如下。
4.输入设备的主页，有三个列表：
搜索设备列表（绿框）;添加设备列表（蓝框）;设备详细信息（橙框）;手动添加（黄框）。
5.单击“搜索”按钮在LAN中搜索，搜索完成后将自动显示在绿色框中。完成。
6.在搜索列表中选择要添加的设备，然后单击“添加”按钮按“Ctrl”进行多重选择。多选。
7.在“添加设备列表”中选择要删除的设备，然后单击“删除”按“Ctrl”进行多重选择。多选。
8.添加设备后，在“添加设备列表”（蓝框）中单击设备的IP，并编辑帐号和端口等信息。和港口。
9.添加，删除和修改后请点击“保存”
Ps：更改主菜单中的配置和参数，您必须单击保存，否则更改将不会被修改。
3.2局域网设置
您可以在LAN设置中修改IP采集模式和端口参数，如下所示。
动态地址（默认）：键盘会自动从路由器请求一个IP地址，请求成功后可以在键盘上显示，格式为“本地IP：192.168.x.xxx”.. xxx“。quot;.
静态地址：当用户需要自己设置网络时，网络类型将变为静态地址，用户需要填写要修改的段的信息。
3.3用户管理
键盘的默认帐户是超级管理员，我们建议用户添加新的管理员帐户，用户可以设置更多的帐户以便于管理。
超级管理员：默认帐号，可以获得所有权限，修改和删除帐号。
管理员：非默认帐户，可以获得许可权限的几乎一部分，修改和配置包括所有页面参数的设备，但是没有权限删除超级管理员。
运营商：非默认帐户，他们可以获取页面，添加 ，删除，搜索等，他们没有权限设置页面。
访客：登录设备 ，浏览页面参数等， t 嘿没有权限配置设备的任何参数。
3.4升级
升级功能用作维护和更新键盘，进入更新菜单后，选择正确的更新文件，点击“开始”，键盘会自动重新启动后更新成功。
Ps：更新时请不要操作或关闭电源/上网！
3.5 出厂复位
如果设置错误或配置错误，请选择出厂复位功能，以确保正常工作。小心点！
3.6 重新开始
长时间工作后，选择重启功能，保证设备正常维护。
4.组合功能
1. 'IP'：有两个功能，方式1：按'地址'+'设定好的数字'+'确认'。它会自动返回到下面设置的地址。返回到下面设置的地址。
选择192.168.1.238，将地址更改为2，保存更改。
按'地址' - 按'2'or'02ss'2“或”02“"or"02 '-，'确认'。它自动转回地址192.168.1.238，可以控制或操作或操作。
方式2：press'addressddress "-".238'-'confirm'，它自动返回到这个IP地址。这个IP地址。
Ps：用户需要设置方式1的快捷号码，并输入'。方式2. 238;为方式2。
2.“删除”：键盘操纵杆“左转”是删除功能，而在添加设备的情况下，如果输入错误的ID和密码，IP地址错误，用户可以使用此功能再次删除或修改。
1.1说明
网络键盘采用工业级液晶显示模块，具有更好的显示效果。
2.支持Onvif协议，良好的兼容性，高可扩展性，内置Web服务器，使配置界面简洁，易于使用，易于控制IP摄像头。
1.2产品特点
支持ONVIF协议
支持离线搜索和添加设备
支持多品牌ip PTZ摄像头
支持运行预设 巡逻和模式
支持设置配置参数
4D操纵杆
1.3连接图
键盘和相机之间的连接在 同一个LAN，并确保IP地址的网段一致，如192.168.1.123和192.168.1.111属于同一网段; 192.168.1.123和192.168.0.125不是，此时您需要修改IP键盘或相机的地址。键盘获取IP的默认模式是动态获取。
2.安装和设置
2.1连接和着陆
将键盘与电源连接，并连接网线。当键盘启动时，屏幕显示本地IP 192.168.x.xxx，在浏览器中输入IP地址，您可以进入该页面默认用户名：admin;密码为空
2.2搜索和添加
使用键盘添加LAN设备
1.设备通常获取IP 请按键盘上的“搜索”按钮。
2.设备将自动显示LAN中支持ONVIF协议的所有设备 完成搜索后。
3.通过操纵杆向上和向下翻页以选择所需的设备，然后按添加。
4.当您添加设备时，需要输入当前的用户名和密码，不同的相机具有鲜明的特征。
5.输入后按“保存”按钮进行保存。
6.添加设备时，可以使用多个设备 不断加入
2.3查询和控制
1.按“搜索”按钮查看添加的设备。设备。
2.按“Enter”按钮选择相应的device.ing设备。
3.当屏幕显示“目的地IP：192.168.x.xxx”时，表示连接成功。然后可以操作PTZrolling PTZ ，缩放等等。
4.当屏幕显示“离线设备”时，请检查LAN中LAN.mal的设备连接是否正常。
5.屏幕显示“用户名”或“密码错误”请检查添加的设备的用户名和密码是否正确。正确与否
3. Web配置
3.1主页
1.使用显示的键盘的IP地址，并通过浏览器进行访问。
2.默认用户名：admin;密码为空
3.输入设备的主页面，屏幕显示如下。
4.输入设备的主页，有三个列表：
搜索设备列表（绿框）;添加设备列表（蓝框）;设备详细信息（橙框）;手动添加（黄框）。
5.单击“搜索”按钮在LAN中搜索，搜索完成后将自动显示在绿色框中。完成。
6.在搜索列表中选择要添加的设备，然后单击“添加”按钮按“Ctrl”进行多重选择。多选。
7.在“添加设备列表”中选择要删除的设备，然后单击“删除”按“Ctrl”进行多重选择。多选。
8.添加设备后，在“添加设备列表”（蓝框）中单击设备的IP，并编辑帐号和端口等信息。和港口。
9.添加，删除和修改后请点击“保存”
Ps：更改主菜单中的配置和参数，您必须单击保存，否则更改将不会被修改。
3.2局域网设置
您可以在LAN设置中修改IP采集模式和端口参数，如下所示。
静态地址：当用户需要自己设置网络时，网络类型将变为静态地址，用户需要填写要修改的段的信息。
3.3用户管理
超级管理员：默认帐号，可以获得所有权限，修改和删除帐号。
管理员：非默认帐户，可以获得许可权限的几乎一部分，修改和配置包括所有页面参数的设备，但是没有权限删除超级管理员。
运营商：非默认帐户，他们可以获取页面，添加 ，删除，搜索等，他们没有权限设置页面。
访客：登录设备 ，浏览页面参数等， t 嘿没有权限配置设备的任何参数。
3.4升级
Ps：更新时请不要操作或关闭电源/上网！
3.5 出厂复位
如果设置错误或配置错误，请选择出厂复位功能，以确保正常工作。小心点！
3.6 重新开始
长时间工作后，选择重启功能，保证设备正常维护。
4.组合功能
1. 'IP'：有两个功能，方式1：按'地址'+'设定好的数字'+'确认'。它会自动返回到下面设置的地址。返回到下面设置的地址。
按'地址' - 按'2'or'02ss'2“或”02“"or"02 '-，'确认'。它自动转回地址192.168.1.238，可以控制或操作或操作。
方式2：press'addressddress "-".238'-'confirm'，它自动返回到这个IP地址。这个IP地址。
Ps：用户需要设置方式1的快捷号码，并输入'。方式2. 238;为方式2。
2.“删除”：键盘操纵杆“左转”是删除功能，而在添加设备的情况下，如果输入错误的ID和密码，IP地址错误，用户可以使用此功能再次删除或修改。
| Model NO. | EV-KB312-USB |
| Structure | Combination |
| Signal | Continuous |
| Certification | RoHS, CCC, ISO: 9001, SGS, CE |
| Customized | Customized |
| Trademark | EYEVISON |
| Origin | Shenzhen China |
| Task | Following |
| Mathematical Model | Linear |
| Function | Automatic Control |
| Condition | New |
| Material | Aluminum Alloy |
| Specification | 490*265*170(mm) 3Kg |
| HS Code | 8525801390 |
IP keyboard controller (EV-KB3)
1.1 Description
1.The network keyboard Adopt industrial grade LCD modules,have better display.
2.Support Onvif protocol, good Compatibility, high Scalability, built-in web server,which made thr configuration interface concise, easy to use, and easy to control the IP camera.
1.2 ProductFeatures
Support ONVIF protocol
Support offline search and add equipment
Support multi-brand ip PTZ camera
Support Operating presets ,patrols and patterns
Support setting the configuration parameters
4D joystick
1.3 Connection diagram
The connection between the keyboard and the camera is in the same LAN, and ensure that network segment of IP address is consistent .such as:192.168.1.123 and 192.168.1.111 belong to the same network segment;192.168.1.123 and 192.168.0.125 are not, At this point you need to modify the IP address of thekeyboard or the camera. The default mode which keyboard gets IP is dynamically obtain.
1.4 Technical Specifications
2. Installation and Setting
2.1 Connection and landing
Connect the keyboard with the power supply, and the network cable. When the keyboard start up,the screen displays local IP 192.168.x.xxx, enter the IP address into the browser and you can enter the page The default user name: admin; Password is empty.
2.2 Search and add
Use the keyboard to add LAN equipments as followed
1. When the device normally get the IP ,Please press 'Search' button on your keyboard.r keyboard.
2. The device will automatically display all the devices which support ONVIF protocol in the LAN ,after completing the search.
3. Flip the page through the joystick down and up to select the equipment you need and press ADD to add.
4. Need enter the current user name and password when you add devices, different camera has distinctive.
5. Press 'save' button to save after input.fter input.
6. When you add a device, multiple devices can be added continuously.
2.3 Query and Control
1.By pressing the 'Search' button to view the added equipment. equipment.
2.By pressing the 'Enter' button to select the corresponding device.ing device.
3.When the screen display 'Destination IP:192.168.x.xxx', indicate the successful connection.Then you can operate such as controlling PTZrolling PTZ ,zoom and so on.
4.When the screen displays'Equipment offline', Please check if the connection of the device is normal in LAN.mal in LAN.
5.When the screen displays 'Username or 'Password Error' Please check if the added device's user name and password are correct or not. correct or not.
3. Web Configuration
3.1 Home page
1.Using the IP address of the keyboard displayed, and access it by browser.
2.The default user name:admin; Password is empty.
3.Enter the main page of device, the screen displays as followed.
4.Enter the main page of device, there are three lists:
Search Equipment List (green frame);Added Device List (blue frame);Equipment details (orange frame);Manual add (yellow frame).
5.Click the 'Search' button to search in LAN, it will be displayed automatically in the green box after the search completed. completed.
6.Select the device you want to add in the search list, then click the 'Add' button By pressing 'Ctrl' to multiple choice.; to multiple choice.
7.Selected the device you want to delete in the 'Add Device List', then click delete By pressing 'Ctrl' to multiple choice.; to multiple choice.
8.After adding the device, click the IP of the device in the 'Add Device List'(blue frame), and edit information such as accounts and ports. and ports.
9.Please click on 'Save' after adding, deleting and modifyingd modifying
Ps: Change configuration and parameters in main menu, you must click Save,otherwise the changes will not be modified.
3.2 LAN Setting
You can modify the IP acquisition mode and port parameters in LAN settings, as followed.
Dynamic addresses (the default) : The keyboard will automatically request an IP address from the router and it can be displayed on the keyboard after the request is successful, the format is 'Local IP: 192.168.x.xxx'..xxx".quot;.
Static Address : When the user needs to set up network by themselves, the network type will be changed to a static address, and the user needs to fill in the information of segment which they want to modify.
3.3 User Management
The defaulted account of keyboard is super admin, we suggest user add new admin account, and user can set up more accounts for easier management.
Super administrator: defaulted account, they can get all the permission authority,revise and delete account.
Administrator: Non-defaulted account, they can get almost part of permission authority,revise and configure device including all pages parameter, but they are not authorized to delete super administrator.
Operator: Non-defaulted account, they can get pages, add ,delete, search etc, they are not authorized to set pages.
Visitor : login device , browse pages parameter etc, t hey are not authorized to configure any parameters of device.
3.4 Upgrade
Upgrade function is used as maintain and update keyboard, after enter update menu, select the right update file, click' start', keyboard will auto reboot after update successfully.ccessfully.
Ps: during updating, please don't operate, or shut off power/Internet!
3.5 Factory Reset
In case any improper setting or configuration wrongly operated, Select factory reset function to ensure the normal working again. Be careful of it!
3.6 Restart
After long time working, Select restart function to ensure the device get the proper maintenance.
4. Function of key combination
1. 'IP': there're two functions, Way 1:press'address'+ 'well-set number'+'confirm'. it auto turn back to the address set below. turn back to the address set below.
Select 192.168.1.238,change address to 2,save the changes.
Press 'address'-Press' 2'or'02ss" 2"or"02"or"02 '-,'confirm'. it auto turn back to the address 192.168.1.238, you can control or operate.or operate.
Way 2: press'addressddress "-".238'-'confirm', it auto turn back to this IP address.this IP address.
Ps: user need to set shortcut number for way 1,and enter'. 238'for way 2.;for way 2.
2.'Delete': Keyboard joystick 'turn left' is delete function, while under add device,in case enter wrong ID and password, wrong IP address, user can use this function to delete or revise again.lete or revise again.
1.1 Description
1.The network keyboard Adopt industrial grade LCD modules,have better display.
2.Support Onvif protocol, good Compatibility, high Scalability, built-in web server,which made thr configuration interface concise, easy to use, and easy to control the IP camera.
1.2 ProductFeatures
Support ONVIF protocol
Support offline search and add equipment
Support multi-brand ip PTZ camera
Support Operating presets ,patrols and patterns
Support setting the configuration parameters
4D joystick
1.3 Connection diagram
The connection between the keyboard and the camera is in the same LAN, and ensure that network segment of IP address is consistent .such as:192.168.1.123 and 192.168.1.111 belong to the same network segment;192.168.1.123 and 192.168.0.125 are not, At this point you need to modify the IP address of thekeyboard or the camera. The default mode which keyboard gets IP is dynamically obtain.
2. Installation and Setting
2.1 Connection and landing
Connect the keyboard with the power supply, and the network cable. When the keyboard start up,the screen displays local IP 192.168.x.xxx, enter the IP address into the browser and you can enter the page The default user name: admin; Password is empty.
2.2 Search and add
Use the keyboard to add LAN equipments as followed
1. When the device normally get the IP ,Please press 'Search' button on your keyboard.r keyboard.
2. The device will automatically display all the devices which support ONVIF protocol in the LAN ,after completing the search.
3. Flip the page through the joystick down and up to select the equipment you need and press ADD to add.
4. Need enter the current user name and password when you add devices, different camera has distinctive.
5. Press 'save' button to save after input.fter input.
6. When you add a device, multiple devices can be added continuously.
2.3 Query and Control
1.By pressing the 'Search' button to view the added equipment. equipment.
2.By pressing the 'Enter' button to select the corresponding device.ing device.
3.When the screen display 'Destination IP:192.168.x.xxx', indicate the successful connection.Then you can operate such as controlling PTZrolling PTZ ,zoom and so on.
4.When the screen displays'Equipment offline', Please check if the connection of the device is normal in LAN.mal in LAN.
5.When the screen displays 'Username or 'Password Error' Please check if the added device's user name and password are correct or not. correct or not.
3. Web Configuration
3.1 Home page
1.Using the IP address of the keyboard displayed, and access it by browser.
2.The default user name:admin; Password is empty.
3.Enter the main page of device, the screen displays as followed.
4.Enter the main page of device, there are three lists:
Search Equipment List (green frame);Added Device List (blue frame);Equipment details (orange frame);Manual add (yellow frame).
5.Click the 'Search' button to search in LAN, it will be displayed automatically in the green box after the search completed. completed.
6.Select the device you want to add in the search list, then click the 'Add' button By pressing 'Ctrl' to multiple choice.; to multiple choice.
7.Selected the device you want to delete in the 'Add Device List', then click delete By pressing 'Ctrl' to multiple choice.; to multiple choice.
8.After adding the device, click the IP of the device in the 'Add Device List'(blue frame), and edit information such as accounts and ports. and ports.
9.Please click on 'Save' after adding, deleting and modifyingd modifying
Ps: Change configuration and parameters in main menu, you must click Save,otherwise the changes will not be modified.
3.2 LAN Setting
You can modify the IP acquisition mode and port parameters in LAN settings, as followed.
Static Address : When the user needs to set up network by themselves, the network type will be changed to a static address, and the user needs to fill in the information of segment which they want to modify.
3.3 User Management
Super administrator: defaulted account, they can get all the permission authority,revise and delete account.
Administrator: Non-defaulted account, they can get almost part of permission authority,revise and configure device including all pages parameter, but they are not authorized to delete super administrator.
Operator: Non-defaulted account, they can get pages, add ,delete, search etc, they are not authorized to set pages.
Visitor : login device , browse pages parameter etc, t hey are not authorized to configure any parameters of device.
3.4 Upgrade
Ps: during updating, please don't operate, or shut off power/Internet!
3.5 Factory Reset
In case any improper setting or configuration wrongly operated, Select factory reset function to ensure the normal working again. Be careful of it!
3.6 Restart
After long time working, Select restart function to ensure the device get the proper maintenance.
4. Function of key combination
1. 'IP': there're two functions, Way 1:press'address'+ 'well-set number'+'confirm'. it auto turn back to the address set below. turn back to the address set below.
Press 'address'-Press' 2'or'02ss" 2"or"02"or"02 '-,'confirm'. it auto turn back to the address 192.168.1.238, you can control or operate.or operate.
Way 2: press'addressddress "-".238'-'confirm', it auto turn back to this IP address.this IP address.
Ps: user need to set shortcut number for way 1,and enter'. 238'for way 2.;for way 2.
2.'Delete': Keyboard joystick 'turn left' is delete function, while under add device,in case enter wrong ID and password, wrong IP address, user can use this function to delete or revise again.lete or revise again.
