China Hot 100W DC12-20V Wireless Charger Solution Customized OEM Direct
中国热100W DC12-20V无线充电器
| 型号。 | SSS-001 |
| 输入投注（Adptor）sp;（Adptor） | 12-20V（可调） |
| 功率 | 最大100 W |
| 发动不安 | 2-8mm的 |
| 充电电流 | 1500mA（电源Rx）层Rx） |
| 商标 | OEM |
| 规范 | 标准出口纸箱 |
| 性能标准 | qi（wpc） |
| 输入当前 | 1A |
| 转换效率 | ≥70％E：70％;70% |
| PCBA Sizep;尺寸 | 55×28 * * 3.5mm283.5毫米8*3.5mm |
| Charing Votage | DC5V（Rx输出电压）放电压） |
| 运输包装 | 吸塑/纸盒/白盒 |
| 起源 | 中国深圳 |
中国热门DC18-24V无线充电器与KC CE FCC
产品规格
产品图片：
输入：12V 2A输出：9V 1A
热销原因：
这种PCBA是设计的 100W，12-20V，5A，工业无线充电解决方案
优点：
我们是一个Wirelees Charing制造商 5年拥有丰富经验的专业工程师团队 无线电话制造 和 ODM原始设计制造商，用于无线智能PCBA和解决方案。只需让我们知道您的ELETRIC POWER PRODUCTS的无线充电设计，我们将帮助您将想法贯彻到完美的产品中。没有人完成文件没关系。告诉我们您的隐藏的SPEC。的产品，我们将发送完成图纸确认。
主要服务：
无线充电解决方案供应商
供应商无线充电PCB供应和布局
供应商SMT上的无线充电PCB组件
无线充电IC供应商
供应商无线充电PCBA
供应商无线充电PAD TX
供应商无线充电PAD RX
无线充电器供应商OEM＆ODM; ODM; ODM
手机无线充电器（CE，FCC，ROSH，QI）供应商
供应商ODM无线智能相关产品
相关产品
A）游戏周边产品：
Wii手柄电池无线双充，
PS3手柄电池无线充电器，
xBox360手柄电池无线充电器，
NDSi电池无线充电器，
NDSL电池无线充电器
B）消费电子：
无线充电电动剃须刀，
无线充电电动牙刷，
无线充电LED手电筒，
无线充电电子防水灯，
无线充电防水手机，
无线充电成人用品，
无线充电电子蜡烛，
无线锂电池充电IC，
无线镍氢电池充电IC，
无线PS3充电器IC，
无线Wii手柄电池充电器IC，
无线NDSL电池充电IC，
无线LED吸引灯电池充电器IC，
无线大灯夜灯电池充电器IC，
无线蜡烛电池充电IC，
无线电子烟电池充电IC，
无线遥控电池充电IC，
无线剃须刀电池充电IC，
无线电动牙刷电池充电IC，
电动牙刷，电动剃须刀，电话无线充电。
C）封闭防水产品 （封闭式防水耳机设备，泳池产品，手表）
D）数码产品
（无线手机充电器，无线iPhone充电器，无线充电MP3，无线充电MP4，相机，蓝光
笔记：
*本模块配置精细铜线圈和进口铁氧体，智能充电管理电路和芯片，全自动待机。确保高功率输出工作效率和稳定性。
*本模块待机电流，输出功率和充电距离可根据您的具体要求进行调整，以达到最佳匹配电路状态！请注意
*使用时，请注意线圈与感应区之间的距离为10 mm，不要放置任何金属或其他导电物体，否则会影响或切断电力传输。不安全
*使用时，保证两个线圈上下对齐，两端铁氧体和两个铁氧体内的两个线圈。保持线圈的最佳使用距离。
*产品质量和性能是我们公司的生命，也是我们公司的长期发展理念。为了确保无线充电模块的性能和质量可以与您的产品完美结合，我们使用可以进行磁体隔离和冷却的铁氧体（在线圈下，约为USD0.4〜1.0，不能用于许多其他厂商）。考虑到通过EMC和其他安全标识考虑辐射干扰，对电路设计进行了调整。
康妮
奥科科技有限公司
地址：广东省深圳市西乡镇古苏华峰世纪科技园B2栋8楼A座
产品规格
| 产品名称 | 汽车无线充电器模块 |
| 牌 | 奥克 |
| 模型 | SSS-001 |
| 无线标准 | qi（wpc） |
| 应用 | 手机充电器，车载充电器 |
| MCU | OEM |
| 输入（Adptor） | 直流12-20v |
| 输入电流 | 1A |
| 功率 | 100W |
| 法时频 | 100-200khz |
| 转换效率 | ≥70％; 70％;70% |
| 发射距离 | 2-8mm的 |
| 充电电流 | 最大5a（供应rx） |
| 充电Votage | 自匹配（RX输出电压） |
| pcba尺寸 | 55×28 * 3.5mm8 *3.5毫米8*3.5mm |
| 板厚度 | 0.2毫米-7毫米 |
| 油尺寸 | 43毫米*2.2毫米 |
| 电线直径 | Φ0.08* 105P * 105P*105p |
| 线圈出口 | 20.mm |
| 线圈内径 | 43.5毫米±0.5usmn; 0.5usmn;0.5 |
| 线圈厚度 | 1.1H±0.5mmmn;0.5毫米mn;0.5mm |
| 硬盾规格 | 50 *1毫米 |
| 焊接面罩颜色/丝绸色 | 绿/白 |
| 充电方法 | 单 |
| 电感 | 4.6uH |
| 电感（增加） | 6.0±5％uHsmn; 5％uH容smn;5%uH |
| 内包装 | 真空包装，塑料袋 |
| 外包装 | 标准纸箱打包 |
产品图片：
输入：12V 2A输出：9V 1A
热销原因：
这种PCBA是设计的 100W，12-20V，5A，工业无线充电解决方案
优点：
我们是一个Wirelees Charing制造商 5年拥有丰富经验的专业工程师团队 无线电话制造 和 ODM原始设计制造商，用于无线智能PCBA和解决方案。只需让我们知道您的ELETRIC POWER PRODUCTS的无线充电设计，我们将帮助您将想法贯彻到完美的产品中。没有人完成文件没关系。告诉我们您的隐藏的SPEC。的产品，我们将发送完成图纸确认。
主要服务：
无线充电解决方案供应商
供应商无线充电PCB供应和布局
供应商SMT上的无线充电PCB组件
无线充电IC供应商
供应商无线充电PCBA
供应商无线充电PAD TX
供应商无线充电PAD RX
无线充电器供应商OEM＆ODM; ODM; ODM
手机无线充电器（CE，FCC，ROSH，QI）供应商
供应商ODM无线智能相关产品
相关产品
A）游戏周边产品：
Wii手柄电池无线双充，
PS3手柄电池无线充电器，
xBox360手柄电池无线充电器，
NDSi电池无线充电器，
NDSL电池无线充电器
B）消费电子：
无线充电电动剃须刀，
无线充电电动牙刷，
无线充电LED手电筒，
无线充电电子防水灯，
无线充电防水手机，
无线充电成人用品，
无线充电电子蜡烛，
无线锂电池充电IC，
无线镍氢电池充电IC，
无线PS3充电器IC，
无线Wii手柄电池充电器IC，
无线NDSL电池充电IC，
无线LED吸引灯电池充电器IC，
无线大灯夜灯电池充电器IC，
无线蜡烛电池充电IC，
无线电子烟电池充电IC，
无线遥控电池充电IC，
无线剃须刀电池充电IC，
无线电动牙刷电池充电IC，
电动牙刷，电动剃须刀，电话无线充电。
C）封闭防水产品 （封闭式防水耳机设备，泳池产品，手表）
D）数码产品
（无线手机充电器，无线iPhone充电器，无线充电MP3，无线充电MP4，相机，蓝光
笔记：
*本模块配置精细铜线圈和进口铁氧体，智能充电管理电路和芯片，全自动待机。确保高功率输出工作效率和稳定性。
*本模块待机电流，输出功率和充电距离可根据您的具体要求进行调整，以达到最佳匹配电路状态！请注意
*使用时，请注意线圈与感应区之间的距离为10 mm，不要放置任何金属或其他导电物体，否则会影响或切断电力传输。不安全
*使用时，保证两个线圈上下对齐，两端铁氧体和两个铁氧体内的两个线圈。保持线圈的最佳使用距离。
*产品质量和性能是我们公司的生命，也是我们公司的长期发展理念。为了确保无线充电模块的性能和质量可以与您的产品完美结合，我们使用可以进行磁体隔离和冷却的铁氧体（在线圈下，约为USD0.4〜1.0，不能用于许多其他厂商）。考虑到通过EMC和其他安全标识考虑辐射干扰，对电路设计进行了调整。
康妮
奥科科技有限公司
地址：广东省深圳市西乡镇古苏华峰世纪科技园B2栋8楼A座
| Model NO. | SSS-001 |
| Input Votage (Adptor)sp;(Adptor) | 12-20V(Adjustable) |
| Power | Max 100 W |
| Launch Distancestance | 2-8mm |
| Chargering Current | 1500mA (Supply Rx)ply Rx) |
| Trademark | OEM |
| Specification | Standard Export Carton |
| Performance Standard | Qi (WPC) |
| Input Currenturrent | 1A |
| Conversion Efficiencyciency | ≥70%e;70%;70% |
| PCBA Sizep;Size | 55×28*3.5mm28*3.5mm8*3.5mm |
| Charing Votage | DC5V (Rx Output Voltage)put Voltage) |
| Transport Package | Blister/Paper Box/White Box |
| Origin | Shenzhen, China |
China Hot DC18-24V Wireless Charger with KC CE FCC
Product Specification
Product Photo:
Input: 12V 2A Output: 9V 1A
Hot Selling Reason:
This PCBA is design for 100W , 12-20V, 5A, Industrial Wireless Charging solution
Advantage:
We are a Wirelees Charing manufacturer for more than 5 years., which has professional engineer team which having rich experience in wireless charrger manufacture and ODM Original Design Manufacturer for Wireless charing PCBA and solution. Just let us know your WIRELESS CHARING ideas of Your ELETRIC POWER PRODUCTS, and we will help to carry out your ideas into perfect products. It does not matter if you do not have someone to complete files. Tell us your detalied SPEC. of products, and we will send you finished drawing for confirmation.
Main Service:
Supplier for Wireless Charging Solution
Supplier for Wireless Charging PCB Supply and Layout
Supplier for Wireless Charging PCB Assembly on SMT
Supplier for Wireless Charging IC
Supplier for Wireless Charging PCBA
Supplier for Wireless Charging PAD TX
Supplier for Wireless Charging PAD RX
Supplier for Wireless Charger both OEM & ODM; ODM; ODM
Supplier for Wireless Charger of Mobile Phone (CE, FCC, ROSH, QI)
Supplier for ODM Wireless charing related products
Related Products Main application:
A) Game periphery product:
Wii handle battery wireless double charging,
PS3 handle battery wireless charger,
xBox360 handle battery wireless charger,
NDSi battery wireless charger,
NDSL battery wireless charger
B)Consumer electronics:
Wireless charging electric shaver,
Wireless charging electric toothbrush,
Wireless charging LED flashlight,
Wireless charging electronic waterproof lamp,
Wireless charging waterproof mobile phone,
Wireless charging adult products,
Wireless charging electronic candle,
Wireless lithium battery charging IC,
Wireless Ni-MH battery charging IC,
Wireless PS3 charger IC,
Wireless Wii handle battery charger IC,
Wireless NDSL battery charging IC,
Wireless LED appeal lamp battery charger IC,
Wireless mostones night lamp battery charger IC,
Wireless candle battery charging IC,
Wireless electronic cigarette battery charging IC,
Wireless remote control battery charging IC,
Wireless shaver battery charging IC,
Wireless electric toothbrush battery charging IC,
electric toothbrush, electric shaver, telephone wireless charging.
C) Closed waterproofing product ( Closed waterproofinetooth headsetdiving equipment, pool product, watch)
D) Digital products
(wireless cell phone charger, wireless iPhone charger, wireless charging MP3, wireless charging MP4, camera, Blu
Notes:
*This module configuration of fine copper coil and imported ferrite, intelligent charging management circuit and chip, full of automatic standby. Ensure high power output work efficiency and stability.
*This module standby current, output power and the charging distance can be adjusted according to your specific demands, in order to achieve the best matching circuit state! Please note
*When used, please note between coil and around inductive zone 10 mm, do not place any metal or other conductive objects, it can affect or cutoff electricity transmission. And unsafe.
*When used, guarantee the two coils on up and down aligned, the two ferrites at both ends and the two coils inside the two ferrites. Keep the coil of best use distance.
*the product quality and performance is the life of our company, also our company's long-term development concept. To ensure that the wireless charging module performance and quality can be combined perfectly with your product, we used ferrite which can magnet isolated and cooling (under coil, about USD0.4~1.0. Not be used from many other venders). The circuit design is adjusted considering to pass the EMC and other safety identification of worrying of the radiated interference.
Connie
Aoke Technology Co., Ltimied
Address: 8F A, B2 Building, Huafeng Century Science and Technology Park, Gushu, Xixiang Town, Shenzhen, GuangDong, China
Product Specification
| Product Name | Car wireless charger module |
| Brand | Aoke |
| Model | SSS-001 |
| Wireless Standard | QI (WPC) |
| Applications | Mobile Phone Charger, Car Charger |
| MCU | OEM |
| Input votage (Adptor) | DC 12-20V |
| Input current | 1A |
| Power | 100W |
| Frenquency | 100-200KHz |
| Conversion Efficiency | ≥70%;70%;70% |
| Launch distance | 2-8mm |
| Chargering Current | MAX 5A (Supply RX) |
| Chargering Votage | Self Match (RX Output Voltage) |
| PCBA Size | 55×28*3.5mm8*3.5mm8*3.5mm |
| Board thickness | 0.2mm-7mm |
| Oil Size | 43mm*2.2mm |
| Wire Dia | Φ0.08*105p*105p*105p |
| Coil's Out Dia | 20.mm |
| Coil's Inner Dia | 43.5mm±0.5usmn;0.5usmn;0.5 |
| Coil's thickness | 1.1H±0.5mmmn;0.5mmmn;0.5mm |
| Hard Shield specification | 50mm*1mm |
| Solder mask color/Silk color | Green/ white |
| Charging Method | Single |
| Inductance | 4.6uH |
| inductance(add sheild) | 6.0±5%uHsmn;5%uHsmn;5%uH |
| Inner Packing | Vaccum Packing, Plastic bag |
| Outer packing | Standard Carton Paking |
Product Photo:
Input: 12V 2A Output: 9V 1A
Hot Selling Reason:
This PCBA is design for 100W , 12-20V, 5A, Industrial Wireless Charging solution
Advantage:
We are a Wirelees Charing manufacturer for more than 5 years., which has professional engineer team which having rich experience in wireless charrger manufacture and ODM Original Design Manufacturer for Wireless charing PCBA and solution. Just let us know your WIRELESS CHARING ideas of Your ELETRIC POWER PRODUCTS, and we will help to carry out your ideas into perfect products. It does not matter if you do not have someone to complete files. Tell us your detalied SPEC. of products, and we will send you finished drawing for confirmation.
Main Service:
Supplier for Wireless Charging Solution
Supplier for Wireless Charging PCB Supply and Layout
Supplier for Wireless Charging PCB Assembly on SMT
Supplier for Wireless Charging IC
Supplier for Wireless Charging PCBA
Supplier for Wireless Charging PAD TX
Supplier for Wireless Charging PAD RX
Supplier for Wireless Charger both OEM & ODM; ODM; ODM
Supplier for Wireless Charger of Mobile Phone (CE, FCC, ROSH, QI)
Supplier for ODM Wireless charing related products
Related Products Main application:
A) Game periphery product:
Wii handle battery wireless double charging,
PS3 handle battery wireless charger,
xBox360 handle battery wireless charger,
NDSi battery wireless charger,
NDSL battery wireless charger
B)Consumer electronics:
Wireless charging electric shaver,
Wireless charging electric toothbrush,
Wireless charging LED flashlight,
Wireless charging electronic waterproof lamp,
Wireless charging waterproof mobile phone,
Wireless charging adult products,
Wireless charging electronic candle,
Wireless lithium battery charging IC,
Wireless Ni-MH battery charging IC,
Wireless PS3 charger IC,
Wireless Wii handle battery charger IC,
Wireless NDSL battery charging IC,
Wireless LED appeal lamp battery charger IC,
Wireless mostones night lamp battery charger IC,
Wireless candle battery charging IC,
Wireless electronic cigarette battery charging IC,
Wireless remote control battery charging IC,
Wireless shaver battery charging IC,
Wireless electric toothbrush battery charging IC,
electric toothbrush, electric shaver, telephone wireless charging.
C) Closed waterproofing product ( Closed waterproofinetooth headsetdiving equipment, pool product, watch)
D) Digital products
(wireless cell phone charger, wireless iPhone charger, wireless charging MP3, wireless charging MP4, camera, Blu
Notes:
*This module configuration of fine copper coil and imported ferrite, intelligent charging management circuit and chip, full of automatic standby. Ensure high power output work efficiency and stability.
*This module standby current, output power and the charging distance can be adjusted according to your specific demands, in order to achieve the best matching circuit state! Please note
*When used, please note between coil and around inductive zone 10 mm, do not place any metal or other conductive objects, it can affect or cutoff electricity transmission. And unsafe.
*When used, guarantee the two coils on up and down aligned, the two ferrites at both ends and the two coils inside the two ferrites. Keep the coil of best use distance.
*the product quality and performance is the life of our company, also our company's long-term development concept. To ensure that the wireless charging module performance and quality can be combined perfectly with your product, we used ferrite which can magnet isolated and cooling (under coil, about USD0.4~1.0. Not be used from many other venders). The circuit design is adjusted considering to pass the EMC and other safety identification of worrying of the radiated interference.
Connie
Aoke Technology Co., Ltimied
Address: 8F A, B2 Building, Huafeng Century Science and Technology Park, Gushu, Xixiang Town, Shenzhen, GuangDong, China
