USB2.0 Extender Over Fiber Max Distances up to 300m Built-in 4-Port USB Hub (HFE2100)

USB2.0 Extender Over Fiber Max Distances up to 300m Built-in 4-Port USB Hub (HFE2100)

USB2.0光纤最大扩展距离高达300m内置4端口USB集线器(HFE2100)

议价

加入意向
型号。 hfe2100
接口类型 usb 2.0
类型 USB扩展器
USB接口 USB2.0
应用 视频传输
规范 ce / emc,ce / lvd,fcc认证
HS编码 85176219
材料 金属
创新程度 创新
证明 CE
港口 4USB端口集线器
商标 phynam
起源 广东中国
USB2.0光纤延伸器最大距离可达300米内置4端口USB集线器(HFE2100)
概述:

HFE-2100 USB2.0光纤扩展器对扩展了USB 2.0的范围,超出了USB 5米限制。 USB2.0光纤扩展器符合支持低速(1.5 Mbps),全速(12 Mbps)和高速(480 Mbps)USB数据传输的USB 2.0规范。
HFE-2100被列为通用USB集线器,并通过光纤缆线提供距离高达300米的4端口USB集线器。 UFE-2100通过USB A型连接器连接到主机。 UFE-2100通过USB A型连接器连接到USB外围设备。
特征
1.通过光纤支持USB 2.0
2.不需要软件驱动程序
3.LC光连接器
4.支持USB 1.1和2.0主机控制器
采用SMF传输5.300m
四个USB集线器端口
7.功率,光纤链路状态和端口LED指示灯(远程)
8.支持任何高速,全速或低速USB设备
9.支持热插拔
10.Works与国家仪器控制器
应用
长途工业相机系统
2.工业仪器系统
3.高速工业打印系统
机器视觉系统
规范
模型 HFE-2100
本地单位 上游港口 USB A型公头
下游港口 纤维
功率 单5V电源,自供电
远程单元 上游港口 纤维
下游港口 USB A型公头
功率 单5V电源,自供电
操作模式 usb 2.0
支持低速(1.5 Mbps),全速(12 Mbps)和高速(480 Mbps)USB数据传输
光纤端口 SFPx1,LC光连接器是标准配置
传输距离 SMF 300米传输
输入功率 100至240 vac,50 / 60hz,至5vdc
外部电源 - 5W典型(本地单元)
- 15W典型(远程单元)
工作温度 0°C至70°c70°ceg;C70 °C
重量 650g
金属外壳 104.4 * 89 * 28(W * D * H,单位:mm)




Model NO. HFE2100
Interface Type USB 2.0
Type USB Extender
USB Interface USB2.0
Application Video Transmission
Specification CE/EMC, CE/LVD, FCC Certification
HS Code 85176219
Material Metal
Degree of Innovation Innovative
Certification CE
Port 4USB Port Hub
Trademark PHYNAM
Origin Guangdong China
USB2.0 Extender over fiber Max Distances up to 300m Built-in 4-Port USB Hub (HFE2100)
Overview:

HFE-2100 USB2.0 Fiber Optic Extender pair extends the range of USB 2.0 beyond the USB 5 meter limit. The USB2.0 Fiber Optic Extender are compliant with the USB 2.0 specification supporting low speed(1.5 Mbps), full speed(12 Mbps), and high speed(480 Mbps) USB data transfer.
The HFE-2100 are enumerated as generic USB hub and provide a 4-port USB hub at distances up to 300m over fiber optic cable. The UFE-2100 connects to host PC through USB type A connector. The UFE-2100 connects to USB peripherals through USB type A connector.
Features
1.Supports USB 2.0 over fiber
2. No software driver required
3.LC optical connectors
4.Supports USB 1.1 and 2.0 Host Controller
5.300m transmission with SMF
6. Four USB Hub Ports
7.Power, Fiber Link Status, and Port LED Indicators(Remote)
8.Support for any High-Speed, full-speed or low-speed USB devices
9.Support Hot Plug
10.Works with National Instrument Controllers
Applications
1.Long-distance industrial camera system
2.industrial Instrument system
3.High speed industrial print system
4. Machine vision system
Specification
Model HFE-2100
Local Unit Upstream Port USB Type A Male
Downstream Port Fiber
Power Single 5V power supply, self-power
Remote Unit Upstream Port Fiber
Downstream Port USB Type A Male
Power Single 5V power supply, self-power
Operation Mode USB 2.0
Support low speed(1.5 Mbps), full speed(12 Mbps), and high speed(480 Mbps) USB data transfer
Fiber Port SFPx1, LC optical connector is standard
Transmission Distance 300m transmission with SMF
Input Power 100 to 240 VAC, 50/60 Hz, to 5VDC
External with power supply - 5W typical(Local Unit)
- 15W typical(Remote Unit)
Operating Temperature 0 °C to 70 °C70 °Ceg;C70 °C
Weight 650g
Metal Enclosure 104.4*89*28(W*D*H,Unit:mm)