10/100M 快速以太网 光纤介质转换器实现了连接转换

10 / 100BASE-TX到100BASE-FX。它将以太网传输距离从“

100米到单模光纤2-100公里。更;该 光纤 有

抗电磁干扰的优点，所以光纤收发器总是适用

长距离和宽带宽计算机网络。

主要特征：

1.符合IEEE802.3 / uBBase-T和100Base-TX / FX

2.支持802.3x全双工流量控制和背压半双工流量控制

链路丢失报警功能

4.支持MDI / MDI-X自动感应

5.可选的内部或外部电源

可选SC，CT，FC或LC（SFP模块） 可选的 光纤连接器

7.提供1路光纤接口和1路以太网接口

8.体积小，功耗低，安装方便

9.支持2U，14插槽机架式（用于外部电源，桌面式媒体转换器

）;支持2U 16插槽机架式（适用于卡类型，千兆位 媒体转换器 只要）

技术参数：

光接口

单模发射光功率：-3dBm〜-9dBm

2.单模接收灵敏度：-33dBm〜-40dBm

3.光纤连接器：双SC /双FC /单SC可选;

自适应光纤： 单模式，多模式。

以太网接口

1.提供1 * RJ45电子接口，支持本地交换

2.符合IEEE802.3 10Base-T，IEEE802.3u 100Base-TX和100Base-FX

3.支持全双工IEEE802.3X流量控制，半双工背压流量控制

接口速率：10 / 100Base-Tx，10M和100M

5.支持广播风暴抑制

6.支持RJ45接口直连/交叉线自适应

电源条件

1.直流电源电压：-48VDC，公差范围-24V〜-72V

2.直流电源电压：+ 24VDC，公差范围+ 20V〜+ 28V

3.交流电源电压：110V〜260V

4.功耗：≤10W10W 10W

工作环境

环境温度：0〜65℃; Cordm;C

2.相对湿度：≤90％（35ºC）5ºC）dm;C)5ºC)

大气压力：86-106Kpa

尺寸

97mm * 70mm * 26mm（台式），可安装在标准19'机架上;架

150mm * 110mm * 28mm内部电源。

10/100M Fast Ethernet Fiber Media Converter achieves the connect transforming from

10/100BASE-TX to 100BASE-FX. It changes the Ethernet transmission distance from cooper'

s 100 meter to single-mode optical fiber' s 2-100 Km. What is more; the optical fiber has the

advantage of anti-electromagnetic interference, so Fiber Optical Transceivers always apply to

long distance and wide bandwidth computer network.

Main Feature:

1. Comply with IEEE802.3/u 10Base-T and 100Base-TX/FX

2. Support 802.3x full duplex flow control and Back Pressure half duplex flow control

3. Link Loss Alarm function

4. Supports MDI/MDI-X auto-sensing

5.Optional internal or external power supply

6.Optional SC,CT,FC, or LC (SFP module) optional fiber connector

7. Provide 1 channel optic interface and 1 channel Ethernet interface

8. Small volume, low power consumption, easy to install

9.Supports 2U,14-slot rack-mounted (for external power supply, desk type media converter

only);supports 2U 16-slot rack-mounted (for card type, gigabit media converter only)

Technical Parameter:

Optic Interface

1. Single Mode Transmit Optic Power: -3dBm ~ -9dBm

2. Single Mode Receive Sensitivity: -33dBm ~ -40dBm

3. Fiber Connecter: Dual SC /Dual FC /Single SC is optional;

4. Adaptive fiber: Single Mode, Multi Mode.

Ethernet Interface

1. Provide 1* RJ45 electronic interface, support local switching

2. Comply with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX and 100Base-FX

3. Support full duplex IEEE802.3X flow control, half duplex back pressure flow control

4. Interface Speed Rate: 10/100Base-Tx, 10M and 100M

5. Support Broadcast Storm Suppression

6. Support RJ45 interface direct connection/cross line auto-adaptation

Power Supply Condition

1. DC Power Voltage: -48VDC, Tolerance Range -24V~-72V

2. DC Power Voltage: +24VDC, Tolerance Range +20V~+28V

3. AC Power Voltage: 110V~260V

4. Power Consumption: ≤ 10W 10W 10W

Working Environment

1. Environment Temperature: 0~65ºCordm;Cordm;C

2. Relative Humidity: ≤ 90%(35ºC)5ºC)dm;C)5ºC)

3. Atmospheric Pressure : 86-106Kpa

Dimension

97mm*70mm*26mm(desktop), can be installed in standard 19' rack; rack

150mm*110mm*28mm Internal power supply.