*

Name: hydraulic opening device SYK-15

Function Description:
1. Switchboard, switch box, sheet metal as a whole has finished the finished paint, the temporary change of specifications, it can simply replace the mold size, perforation will not destroy the finished surface.
2. Die size can be customized to rely on customer demand, fast delivery.
3. Rectangular, square-made, be sure to measure the correct size required.
SYK series hydraulic perforator is a kind of advanced manual hydraulic tool which can cut holes in the metal plate below 4mm. It can play the role of opening which can not be achieved by the general stamping equipment. Its operation is simple, labor-saving, Hydraulic opening device structure light, beautiful, easy to carry, for metallurgy, petroleum, chemical, electronics, electrical appliances, shipbuilding, machinery and other industries to install and maintain the wire (Figure), the surface of the surface of the hole, Pipes, lights, instrumentation switches, etc., is more suitable for forming the instrument panel floor, switch box sub-line electrical box wall opening purposes.

Operating procedures
□ To be a hole in the hole before the workpiece, first with a hand drill to play a 11.5 mm / 20.5mm guide hole.
□ Insert the piston rod into the screw hole of the piston cylinder, then insert the gasket into the piston rod and then into the die, then insert the piston rod into the guide hole of the workpiece, and finally screw into the punch so that the punch Surface closely, punch, the workpiece, the three die fixed and reliable.
□ Close the oil return valve clockwise, and then repeatedly press the afterburner handle, so that the piston pump to work, the oil pressure increases, the shear between the concave and convex mold increases, the mold cut the hole in the workpiece until the cut so far. Immediately after cutting, press and hold the lever.
□ Unscrew the return valve in counterclockwise direction so that the oil pressure is completely unloaded. After the above four steps, a complete opening operation procedure is completed.
□ Unscrew the punch, remove the die in the die, wipe clean mold.