3000mAh CCTV Tester and UTP for Analog Camera

3000mAh CCTV Tester and UTP for Analog Camera

bargain

add to cart
Model NO. HVT-2611
Size 3.5 Inch
Screen Size 3.5 Inch
Aspect ratio 3.5 Inch
Optimum Resolution 480*320
Response Time 3ms
Interface Type HDMI
Specification CE, FCC
HS Code 9031809090
Type TFT
Power 5V 2A
Application Big-Screen Project, Indoor, Outdoor, Surveillance
Feature LED Backlight Display, Support TV Function
Widescreen Widescreen
3D Not 3D
Trademark EYEVISON
Origin Shenzhen, China

3000mAh UTP Cable Web Camera Tester SD Card Baud Rate Multi-Functional
Quick Detail:
1.10x zoom, video image can be magnified to view the details, easy to use
2.Snapshot and save the current image as JPG file in the SD card
3.Optical power meter, used for optic fiber CCTV monitor system, CATV system, optic fiber communication networks deployment and test
4.PING testing, test IP camera or other network devices' ether net port whether work normally, and the IP address whether is right
5.IP address scan, quickly search the IP address for the connected IP camera and other network devices
6.POE voltage measurement, test the Poe switch's voltage to IP cameras, wireless AP device and other PD devices
7.Device Port flicker, easy to find the connected Poe switch port by sending special signals, the connected Poe port will flicker at special frequency.
8.Link monitor; check the setting IP address whether occupied
Function:
1. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.
2. Enhanced Color bar generator
Video Generating, the PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful imagines). By receiving the video color bar to test the video channel whether transmit normally. And judge whether the color is different, because of the transmission loss or interference, it suitable for Video transmission of the field tests, such as optical video transmitter and receiver, video cable etc.
The new function color bar can test the image whether shift.
The color bar (red, green, blue, white, black) test the monitor whether have white or black dot etc.
3. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
4. Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
5. Cable tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.
Specification:

Model

HVT CCTV TESTER HVT-2611 ( 6th generation)

Video Test

Signal mode

NTSC/PAL (Auto adapt)

Display

3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution

LCD adjustment

Brightness, Contrast, Saturation adjustable

Video IN/OUT

1 channel BNC Input & 1 channel Outpututpututput

Video Output Mode

1.0 VP-p

Video Level test

Level test

Video signals measured in IRE or mV

PTZ controller

Communication

Support RS232 and RS485

PTZ Protocol

Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, LILIN, YAAN, etc.

Baud Rate

600,1200,2400,4800,9600,19200,57600,115200bps

Video Signal Generation

Color bar generator

Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )

UTP CABLE TEST

UTP cable test

Test UTP cable connection status and display in the screen. Read the number of the test box.

DC12V 1A power output

DC12V power output

Output DC12V1A power for camera

Audio input test

Audio input test

test the pickup and other audio equipments on the front-end

RS485 data analysis

Data Monitor

Captures and analyzes the command data from controlling device

10 x zoom of image

Image 10x zoom

10x zoom image display and video out

Photograph, Video record, Record playback

Photograph

snapshot and save the current image as JPG file

Video record

Video record and storage the file

Record playback

To view the storage file in the SD card

Port flicker

Port flicker

Find the connected POE port quickly.

IP scan, Link monitor, PING test

IP scan

Find out the connected IP camera or the other network equipment IP address quickly.

Link monitor

Check the IP address whether is occupied

PING testing

Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address

POE tester

POE tester

Display the power supply voltage and cable connection states

Optical power meter

Calibrated Wavelength(nm)

850/1300/1310/1490/1550/1625nm

Power range(DBM)

-70~+10dBm

Sensitivity(NW)

0.001nW

Connector type

FC/PC

Data hold

Display data hold

Relative measurement

Display the measurement value

TDR Tester


TDR Tester

breakpoint and short circuit measurement(BNC cable, telephone cable)

POWER

Power Adapter

DC 5V(1.5A)

Battery

Built-in 3.7V Lithium polymer battery ,3000mAh

Rechargeable

After charging 3-4 hour, working time lasts 11 hours

Low Consumption

Energy saving technology, the battery icon real-time display

Parameter

Operation setting

English/Chinese and other languages OSD menu

Auto off

5-60 (MINS)

Key tone

On/Off

General

Working Temperature

-10°C--+50°C+50°Ceg;C+50°C

Working Humidity

30%-90%

Dimension/Weight

194mm x 112mm x 48mm / 540g




Applications:
1. Find out the other end of the cable in security maintenance and network engineering
2. CCTV system installation and maintenance
3. Dome camera and All in one camera testing
4. The CCTV transmitting channel testing
5. PTZ controller