The new arrival! Domestic oppo vivo soft side cartoon membrane!

Perfect fit, cute cartoon logo.

Let you put it down!

The following cartoon film pattern >>>>>

Series full map

Not pasted the film, will not paste how to do?

1. Film is best in the absence of wind, less dust, light enough to be easy to clear the phone on the screen of small dust, and then prepare a little tape backup.

2. First clean up the hands of dust and grease, wash your hands with hand-washing liquid.

3. With glasses cloth or soft cloth without hair loss clean the surface of the phone, clean the surface of the phone dust, fingerprints and so on.

This link is very important, be sure to clean up, if not clean with a soft cloth, you can use a transparent tape gently paste the phone screen to clean up dust, light enough to clean up more thoroughly.

If the film is changed, the old film just take down the screen is very clean, it is best to take down immediately paste, to prevent the dust in the air fall into.

4. Tear the side of the protective film, and then aim at the phone, align the top and left side of the stickers under the film.

5. In the film, try to keep a uniform, such as the emergence of bubbles back less pull back to ensure that the surface of the film without bubbles.Then use wool felt scraper, or pad scraper class, to avoid scratches. Film a little bit, press the surface of the phone, in which case the bubble will be generated immediately.

6. After the paste, and then part of the regional air bubble repair. Soft cloth swab bubbles, and then slowly the output, the bubble out of the edge, if it is dust caused by the bubble is not squeezed out.

7, if there is dust on the surface of small particles, please uncover the block (which can be used to stick the film from a corner of the film and then exposed), with the tape and other particles will stick out, and then paste the film.

Just bought the film paste bad, which a lot of dust how to do?

Our film is the use of electrostatic adsorption principle, the membrane is very clean up the dirty. Hand clean, with a tape to the film above the dust paste can be re-attached (need to pay attention to glue too strong tape in the clean-up time Easy to stay in the film on the membrane.) And can be reused, when not in use can be removed from the film, attached to a clean film to save up.