Associate marketing, do not delete

Associate marketing, do not delete

Ultraviolet LED of 365nm wavelength is relatively expensive (UV ultraviolet wavelengths as short as the more expensive); 1. Amber, Emerald, jade and identification. 2. fluorescent agent, fiber fluorescence detection. 3. Notes, bills, vouchers, and alcohol and tobacco, stamps security testing. 4. mineral exploration. 5. printing inks, resins, UV-curing. ! !

Tips about well: 365NM violet flashlights feature light is weak, but the pure light, only as identification of fluorescence (not lighting OH), without fluorescence Visual feel like white with a little yellow light (to get a better appraisal), but are actually violet Oh, encountered strong fluorescent fluorescence reaction would be!

365nm, out of light purple is not included, does not affect the judgment. 395nm Purple is so strong that sometimes affect judgment.
365nm according to fluorescent than 395nm strong a lot; 395nm 365nm weak fluorescent!

"Overview of characteristics of light sources – must read before"

• Mask, skin care products, baby clothes, make water not wet, sanitary towels, wet wipes these things may contain carcinogens fluorescence, all can be detected, mini violet flashlights, small and portable, easy to use, accurate.

• Highly recommended professional 365nm identification of fluorescence artifact, blue white light fluorescent agent, visual contrast more noticeable.

• 365nm (Professional Edition) naked light is white, light blue, dark, light and color purity. Photos containing fluorescent fluorescence material objects reflecting the strong, bright blue, according to the non-fluorescent materials do not change color, so violet 365nm, results will be more intuitive and accurate.

• 395nm (Basic) normal color is bright blue, higher brightness. Upon detection of fluorescence, light from a large fluorescent particles, are bright blue spots, large area fluorescence detection does not recommend using this light source, because 395nm itself highlighted blue, will affect the test results, it only applies to General requirements for fluorescence detection.
• Stainless steel heat fast, led 3W high power, detecting light mild is a normal, non-quality problems, mind if parents take caution!

I. switch instructions for use
1, the battery positive (lamp), negative pole facing out (tail).
2, the switch at the rear, the switch function switch is a switch function, the flick of a switch are dimming.
II. Board instructions
1, our flashlight uses advanced constant-current technique can effectively address the constant-current LED flashlight's requirements.
2, special instruction: a. do not pressure, voltage do not exceed 4.2V b. battery positive forward, not reverse, otherwise it will burn plate c. attention to control the torch temperature changes, ensuring heat d. non-professionals do not open circuit board
3, warranty description: open circuit is no longer under warranty or addressed.
III. lithium battery instructions
1, the characteristics of lithium-ion batteries: lithium battery and cell phone batteries charged totally different ways; Lithium-ion batteries do not have memory and can be filled at any time, do not overcharge.
2, charging at least 6 hours for the first time, according to the charger the green light then it is possible, no charge.
3, special tip to use against overcharge, anti-, short circuit-proof ' proof ' charger
4, the battery is not used for a long time, should save power full, normal discharge about once in three months;
IV. flashlight specifications
1, torches in use, according to torch the requirements for voltage and battery choice, not to prevent burn circuit boards, different models, different voltage of battery do not use both.
2, in use, when the obvious changes in the brightness of the torch, to turn off the flashlight, preventing battery overcharge.
3, cooling techniques: the torch is in use, to ensure the heat. Strongly required when battery is fully charged, it is best to use second gear, be extended so that we can let the torch lamp and battery life! Torch light cannot be direct human eye, super bright, so as not to affect vision, especially for children.
V. troubleshooting
1, check the battery: make sure battery power and the batteries in the correct direction, do not use different brands of batteries, old and new batteries cannot be mixed.
2, check the tail Cap: make sure switches are tight and in good contact, ensure the tail Cap copper cylinder and the tail cap ring metal contact is good, note that lamp is loose.