Cast iron platforms including : Three dimensional flexible welding platform, crossed the platform, platform, ground platform, welding platform, the standard plate, fitter platform clamps, t-slot platform (t-slot plate), rail geosyncline iron platform iron Rails, testing platforms, assembling, welding platform

Cast iron plate Usually made of high strength cast iron as a material, also known as cast iron cast iron platform Assembly platform, test platform, face plate, t-slot plate welding Flat mosaic tablet, Tablet tooling platform. Cast iron plate After the hosts were cast iron platforms bear the weight per unit area, the deflection of the plate. In order to understand this, we can be thought of as flat well after the workpiece, flat without affecting the normal use of the case, it can withstand the pressure. For example: 2000mmx4000mm of the tablet can be placed weighed 64 tons of artifacts, this cast iron Assembly platform hosts we can be as simple as: 64 ÷ (2 m x X4) = 8 tons/sqm. Of course load and the actual design and actual production and processing also has a close relationship. Tablet bearing and lwh, stiffened, surface, weight, material requirements were inextricably linked. Are consistent with the People's Republic of China mechanical industry standard JB/T7974-2001 requirements.

Cast iron plate Precision grade follows the General accuracy of cast iron platform partitioning requirements, according to the national standard metrological implement respectively 0, 1, 2, 34 levels. Requirements, General specification for a majority of cast iron platform, if you have special requirements specification is based on drawings or made of special user requirements. Cast iron Assembly platform can also splice used for large-scale machinery and equipment Assembly, when Assembly platform could not undertake Assembly work independently for a time, you can piece together pieces of cast iron Assembly platform will be used.

Cast iron plate Is to check machines parts ' flatness, straightness tolerances of form and position of the measurement reference can also be used in parts line grinding, installation equipment and so on. Test machine parts flat, parallelism, straightness tolerances of form and position, such as benchmarks, dash is available for General precision parts and components, welding grinding process and measurement.

Cast iron plate Specifically applied to large equipment base levelling, reasonable design, structural stability, high precision, wear-resistant characteristics of 3000mm-6000mm Tablet mosaics can be realized, the product is made by scraping or grinding. Widely used in machining, tool shop, machine (test) repair shop, large equipment base, measuring and precision machining of test, measuring and grinding, and precise measurements, test the flatness of the workpiece, flatness and the tolerance value.

Material : Cast iron plate by HT200-300 casting, material ingredients blend raw material content according to the following criteria (%): carbon: 3.1-3.4, MN: 0.6-0.9, SI: 1.5-2.0, 0.12, sulfur, and phosphorus 0.3.

One Cast iron platform lapping

Scratch one is beautiful and b is of the lubricating oil from the accumulation function. The usual pattern: diagonal pattern, bird's nest-shaped pattern and scale patterns. In addition, original pattern can be observed through the full and disappear when the case surface of the degree of wear.

Second, cast iron platform rough blow

If the surface roughness, machining marks deep or badly rusted on the surface, rough or distorted, scraping allowance in 0.005mm above, should be rough shaving. Crude is characterized by a long blade scraper, stroke is longer (between 10MM~15mm), cut a wide (10MM), scrapers, mark forward, pieces are not duplicated. Machining marks hangs after the addition can be developed and high of scraping. When cast iron 25mmx25mm Institute points to 4~6 points on the surface of the platform and stayed there when machining a fine, starts fine shaving.

Third, blowing fine cast iron platform

Fine scratch that the rough scrape scrape high, characterized by short scraping method (marks a width of 6mm, long-5mm~10MM), the Institute spread fast. Fine when moving in a certain direction, blow out again, blow it a second time to 45 degrees or 60 degree crossing scraping textured. When average 25mmx25mm Institute points to 10~14 points, ended a fine shave.

Four cast iron platform essential shaving

In fine scratch to proceed on the basis of scraping, using small blade or fine with circular blade, knife width 4mm, research should be 20~25 on every 25mx25m-point average, is often used to test tools, precision contact surface of Rails and close the tool scraping.

Botou Yongjun Gage company profile

Yongjun measuring machinery company https://btyjjx.1688.com located in botou, Hebei province, North of Beijing and Tianjin, East of the Bohai Sea, 104, 106 national highway, Beijing-Shanghai Expressway, Beijing-Shanghai Railway runs through the whole territory, the transportation is very convenient. Our company mainly produces cast iron platform shaped castings, machine tool castings, casting, square tube, v-v-iron. Our company has always adhere to people-oriented, science and technology as guide, innovation and development. While enterprises continue to introduce advanced technology in the world, the introduction of a large number of professional and technical personnel, expand the advanced production equipment, enterprises are increasingly strong technical force, economic strength is also growing.

First of all strictly raw material incoming material, followed by strict control of investment casting process, the last series of tests: furnace material testing oven thermometer temperature, ultrasonic testing of finished products and hardness testing. Product material in more than appearance for customers to rest assured, satisfaction.

Companies to be market-oriented, customer-centric, relying on the technology, strengthening brand awareness, improve service levels, the future, continue to forge ahead, work to develop a sound management system and competitive advantage of scientific and technological enterprises

1. manufacturers supply genuine

2. with regard to sizes GB specifications measuring tool factory for many years with cash, after we receive your order and shipped within 72 hours of non-standard gauges can be customized, making short, please rest assured purchase.

3. with regard to color Shops for sale prices do not include taxes and fees, if you need stamps, please contact customer service

4. If your inquiry did not respond in time, please contact your sales manager directly. Sales Manager Tel: 15103271458 (24 hour line)

5. with regard to after-sales Product quality guaranteed for 12 months, supplier during the warranty period due to the design, technology or material defects caused by quality issues should receive notification within 12 hours to give a written reply. And free of charge repair or replacement of the product. Approval of products, replacement, repair warranty service.

Establish quality files, track return visits. Product life-long maintenance, only simple materials and labor costs, and the old for the new.

Actively cooperate with the user improve the site operation and maintenance of the product, providing free consulting services. May at any time provided at cost to the user of our products spare parts and accessories.

Mosaic platform or multiple device installation, commissioning, on-site technical services, led personally by the technical expert on-site services, solve a variety of problems.

6. with regard to delivery Products are packed in non-customized products single and 50kg products send ordinary Express, generally within 72 hours of arrival; single and 50kg products logistics and distribution, your preference for cities where there is a through line, remote or small towns are trucking logistics distribution, General delivery time for 4-7 days. Shipping cost actually offer subject to logistics companies, shops for sale prices do not include shipping charges. If your special request express, air and rail courier at your own expense.