Product parameters:

• Brand: cross
• Customized processing: Yes
• Type: collision
• Size: 40*2.5CM
• Applicable models: General
• Color: Silver
• Materials: colloids

Packing: 50 PCs/CTN

Carton size: 51*28*23.5

Product description 1, this product is a 4 Pack, perfect curves, curves and perfect combination of smooth shuttle.
2, cars crowded streets, reversing or parking, and there are some very small bumps, scraped

A little paint can really hurt. Fitted at each corner of the car bumper, to avoid as far as possible in small friction, scratch the paint.
3, good quality, durable, and elegant in the car.

Product features
1, this product is affixed to the front of the car, then, can effectively prevent the car due to accident damage.
2, using double-sided tape, put more stable.
3, the product is affixed to the front of the car, on the rear bumper, can effectively prevent the car due to accident damage.
4, easy to install, good wool, long term durability, not afraid of metamorphic and decoloring.
5, the diversification of products, elegant, suitable for all kinds of vehicles.

Use method
1, bumper car of dust, oil and other contaminants clean, location of the selected post.
2, then use hair dryer heat the double sided tape on the back, and then back after the tape was torn off, put it on the front and rear bumpers.
3, with the interests of users, can be attached to any free location.

Introduction

Bull, also known as protective, rubbing Strip, rubber fenders, Robin, take the belt. mainly used for inflatable boats, boat, rafting boats, yachts and a variety of water amusement equipment and facility protection. Its main material according to ship materials to choose. For example, hull sea Pallon (CSM), article protection should be made of EPDM material; Hull made of PVC cloth or glass fiber reinforced plastic material, protection should be made of rubber and plastic (modified PVC) material.
Rubber protective Strip (modified PVC) rich, lower prices, bond easily. High quality protective strips aged more than 10 years, is an ideal boat protection.
Note the use of
Rubber protective Strip in front of a bond with boats should be at about 50 ° thermostat heating 3-5 hours to make it soft, and then brushing adhesive for adhesion. Adhesive should be at room temperature over 25 ° in the clean room.
This collision or crash, is installed in the install
Unloading platform edges to facilitate truck dock rubber pad, play a role in protection of cargo and trucks against damage. Bumper guard is one of the unloading platform must have protective equipment. Material and technology
Rubber or natural rubber;
Die casting or stamping;
When installed with goods by expansion bolts or welding.
Crash effect:
1, an increase of line and movement of the body, plays a decorative role.
2, prevent foreign abrasions or bruises of the side hull, play a protective role. Due to collision cover a small portion of the body, when the side hull was hit there, and its protective effect is small.
Collision with the car body structure:
1, embedded: the car body molding, corresponding fluted, Bull embedded in it.
2, plane: the body made the plane, set aside several holes corresponding and bull stigmas corresponds to inserting one stick
Paste.
3, fixed: using the nut and screw the bull and the body is fixed on.
Paste method of collision:
Generally recommend using 3 m adhesive, plastic glass, 205 gum paste.
But there are drawbacks: too thick adhesive attachment, resulting in dense paste; Adhesive performance is poor, bond firm, not lasting. Snap snap to remind when Bull ages, concussion or fall off, please purchase and replacement of the collision.