Product parameters:
Smallest and thinnest, lightest applicable energy meter.
UV energy meter (UV-IntMicro): UV-intMirco micro UV energy meter is a high quality UV energy meter. UV energy meter is for measurement UV curing device of UV energy of a instrument, measurement instrument of main sense device in measurement instrument of back, measurement range for 250~410 Nano, measurement Shi can directly displayed Yu energy meter positive of display Shang read out (units: cents joules/square centimeters), the energy meter of power for 3.6 volts of lithium battery, the battery due to using has special of energy save line, the battery can continued about 10,000 hours.
The product is only : 54X44mm high 12mm. equivalent to the iPhone two-thirds size. Suitable for all kinds of light and reflected light exposure machine, flat-screen printing UV equipment.
Depending on the UV bands, are now available in three models.
3 models: M36/M42/M33
NEW: default 3-5 minutes automatic shutdown
(Based on customer needs to set auto off time)
Used equipment: UV ultraviolet drying machine, machine, rotary printing press
Measuring range: 0-5000mW/cm2
Energy display: LCD 0-999999mj/cm2
Power supply: lithium battery 3.6V
M36 measurement range: 315-410nm Max:365nm
M42 measurement range: 350-460nm Max:420nm
M33 measurement range: 250-410nm Max:330nm
Matters needing attention : Do not direct or non-direct UV light source, ensure that any part of the body is not affected by UV light away from direct sunlight.
The UV energy meter can withstand higher temperatures, not more than 10 seconds on the conveyor belt, resistance to temperature of 110 ° c.
Installation/operation
A. turn ON switch, the LCD (display) is displayed as zero.
B. the UV energy meter is placed in the vicinity of UV light source, as far as possible to the back at the light source (energy meter energy sensors in reverse), extend the exposure time properly.
C. until the measurements on the energy meter display shows, for example 800 MJ/cm. (800mj/cm2)
D. energy meter switch off (OFF) or set the display value to zero.
