Flexible fixture for my company's expected from the election process in strict accordance with the advanced technology in the world, mainly processing equipment as CNC milling, high precision, to ensure accurate positioning of weld geometry. Reliable and durable, and is a common fixture, simple to use, easy to maintain.

Flexibility: because these functions complete set of equipment may vary depending on the product, a fixture used for several products or the needs of dozens of products, thus greatly accelerating the product development, manufacture process, save a great deal of human, material and financial resources (environmental protection and low-carbon products).

Combination: because all annexes have already been good, can be based on any combination of product demand and adjustment.

Holes: the main characteristic of this fixture is from the platform to the annex is the standard hole traditional threaded or t-slot, together with quick lock pin can make the Assembly more convenient, more precise.

Welded plate: this product is designed for manufacture of welded products of common fixtures for welding is very convenient, flexible, precise and advanced many traditional welding methods.

Three dimensional steel weld plate size (q345 can also be called 16mn)

Three dimensional flexible welding platform with five faces ,Side used to extend or secondary location;

By series is divided into D16/D22/D28A series of three;

D16Series of Kong Wei Φ16,Hole spacing 50mm±0.05Arrays, along with 50x50mm Grid lines;

D22Series of Kong Wei Φ22,Hole spacing 75mm±0.05Arrays, along with 75x75mm Grid lines;

D28Series of Kong Wei Φ28,Hole spacing 100mm±0.05Arrays, along with 100x100mm Grid line.

Three dimensional steel platform dimensions: (Materials q345Can also be called 16mn)

Long xWide (mm):

1000x1000 /1200x1200/500x1500/2000x1000/2400x1200/3000x1500/4000x2000

Three dimensional cast platform dimensions: (Cast iron ht300)

2000x1000/2400x1200/3000x1500 Side platform height 200mm

Cast iron plate Specifically applied to large equipment base levelling, reasonable design, structural stability, high precision, wear-resistant characteristics of 3000mm-6000mm Tablet mosaics can be realized, the product is made by scraping or grinding. Widely used in machining, tool shop, machine (test) repair shop, large equipment base, measuring and precision machining of test, measuring and grinding, and precise measurements, test the flatness of the workpiece, flatness and the tolerance value.

Repair work platform/cast iron Accuracy of the face is mainly flat. T-slot of the workpiece and clamp plate face is the positioning and movement between the direction of the relationship, in order to make reliable and cast iron flat face contact, its flatness is generally provided for in the concave. Countertops in all directions (vertical, horizontal, diagonal, radiation) on the straightness of the maximum values as a table surface flatness. With Rails straightness measurement method measurement method is basically the same. Available research points method, feeler gauge method, leveling instrument, optical flatness measuring instrument and method of inspection.

Cast iron platform technical requirements:

1, the platform must go through two back stress aging treatment, prevent stress memory appears distorted and platforms used in the occurrence of cracks in the future to eliminate casting stress and rough purpose of stress, strain relief up to 90%;

2, face processing acute angle obtuse;

3, casting force is not machined surface greasy, polishing, are required to paint coating on the inner surface;

4, flat face without seriously affecting the look and performance of sand, pores, cracks, inclusions, porosity, scratches, bumps, rust and other defects.

3, precision is 0 ~ 3-level on the flat face of diameter less than 15mm blockage of sand allows the use of the same materials, its hardness is less than with the hardness of surrounding materials. Sand blocking the face-hole should be no more than 4. And sand between the distance should not be less than 80mm.

4, plate shall be made of high quality fine grey cast iron or alloy materials such as cast iron, its working surface hardness should be 170~ 220HB.

5, flat working surface is usually applied using a scraping process. Skiving machining of 3 flat working surface, the surface roughness Ra of the maximum allowable value of 5 ч m.

7, flat face paint for the Institute tests should be carried out using the scraping process. Displayed after the grinding point of contact area ratio is shown in table 3 provisions or 25mmx25mm difference between points of contact shall not be more than 5 points. In case of disputes, contact area ratio as the assessment basis.

8, flat on either side, should have a threaded hole of the handle or ring equipment installed (or a cylindrical bore), and location of the device should be designed to minimize the deformation caused by the handling.

9, plate set screw hole on the face (or Groove), which parts should be no higher than the face.

1. manufacturers supply genuine

2. with regard to sizes GB specifications measuring tool factory for many years with cash, after we receive your order and shipped within 72 hours of non-standard gauges can be customized, making short, please rest assured purchase.

3. with regard to color Shops for sale prices do not include taxes and fees, if you need stamps, please contact customer service

4. If your inquiry did not respond in time, please contact your sales manager directly.

5. with regard to delivery Products are packed in non-customized products single and 50kg products send ordinary Express, generally within 72 hours of arrival; single and 50kg products logistics and distribution, your preference for cities where there is a through line, remote or small towns are trucking logistics distribution, General delivery time for 4-7 days. Shipping cost actually offer subject to logistics companies, shops for sale prices do not include shipping charges. If your special request express, air and rail courier at your own expense.