Explosive recommendation HOT

Aluminum plate specifications

Aluminum plate specifications: (angle, right angle) 600mmx600mm, 300mmx300mm

500mm×500mm 400mm×400mm

Characteristics of aluminum plate

1, surface coating with excellent performance. High quality aluminium composite panels using high quality paints, from imported high-speed automatic coating line coating plate surface formation, no

Color, coating adhesion, acid, alkali, salt spray corrosion, long time without discoloration, paint loss, Fluorocarbon coated plate is the ideal decorative materials for outdoor use, service life of 20 years or more, and convenient maintenance, rinse it clean as new.

2, strong composite stretch. Aluminum-plastic plate selection of high quality poly plastic and polymer formed by hot press compound, no adhesive layer by 2 hours of boiling water test failure.

3, temperature resistance. Aluminium composite panels can be used in a large temperature changes, its performance is not affected.

4, light weight and high strength. Each Board in an average of 8.5 kg, in the case the same stiffness, light weight than other materials.

5, sound and heat insulation, shockproof. The double performance of aluminum-plastic plate with metal and plastic, the attenuation coefficient is made of pure aluminum plate six times, airborne sound is better than the other plate, and the coefficient of thermal conductivity is small, is ideal for sound insulation, heat insulation, shock-proof building material.

6, safe, fireproof. Aluminium composite panel core is nontoxic polyethylene, its surface non-combustible aluminium, surface burning characteristics meet fire resistance requirements of the building code.

7, rich colors, optional range. Aluminum-plastic plate color range, color combinations, harmonious and elegant.

8, excellent processing properties. Aluminium composite panels can be cut with ordinary wood and metalworking tools, saws, milling, punching, pressing, folding, bending and forming, can accurately complete the requirements for the design.

9, aluminum buckle plate surface is flat, distinct ridges, ceiling system reflected neat, generous, rich and elegant, open appearance. Aluminum plate with flame retardant, corrosion-resistant, moisture-proof advantage, and easy to disassemble, each Board will be an independent entry, easy construction and maintenance. If you need to replace and clean ceiling panels, magnetic suction cup available or special release plate quick access panel or on the back covered with a layer of sound-absorbing perforated paper or black flame retardant cotton, to achieve certain acoustic standards.

Aluminum plate selection tips

First, the material.

Currently on the market the aluminium material mainly has following several kinds: origin into ordinary aluminum as aluminum, and aluminum Southwest aluminum; International label of aluminum is 1100, 3003, 5005 label; According to strength of aluminum alloy divided into H24, H18; Aluminum toughness into an ordinary aluminum, aluminum-magnesium alloy, aluminium-manganese alloy. Sales of ceiling materials on the market today are mostly used in ordinary aluminum, which is characterized by low intensity, smoothness, high toughness, not deformed. Without a good substrate, can greatly affect the service life of aluminum plate.

Second, the surface treatment.

Surface treatment of aluminum plate are mainly the following: static spray, paint roller, Pearlescent roller coating, coating.

Following is a detailed description of each plate surface treatment technology:

1, coating technology: high temperature die casting directly on the aluminum substrate with a layer thickness of PVC membrane 18--25C, drawback is easy discoloration. 2, roller coating process: is rolled on the surface coated with polymer coating, the advantage of durability is not easy to change color.

Roller printing: roll a screen print of the Board and on the basis of, the effect is to make a single roll sheet colors. Roller heat permeability transfer (also known as heat penetration seal): roll and screen printing is in coated sheet is printed on the basis of only heat penetration

Print by high temperature sublimation into the ink roll coating inside, face touching is feeling less rugged

This is where the difference between screen printing, heat penetration printing is digital, color can be formed from n. Screen printing can only be

By colors.

3, scrub process: on the aluminum plate for wire drawing and manufacturing process of light oil. Most common sheet currently on the market.

Third, technology.

Technology is the so-called plate surface adhesive, which consumers often overlook. If the process is not good for the service life of the product is very large, aluminum plate manufacturers process currently on the market have made a big difference, many small factories is basically taken workshops, technology of reduced life expectancy. Aluminum plate recommended by choice, should know this one.

Surface treatment of aluminium plate

Surface treatment of aluminum plate are mainly the following: static spray, paint roller, Pearlescent roller coating, coating. Electrostatic spraying, paint roller, Pearlescent roller coating, coating. Electrostatic spraying, paint and short service life, prone to chromatic aberration, roller coating, Pearlescent roller plate centered life, free from chromatic aberration, film can be divided into ordinary film and imported film, compared to ordinary film rolled and coated sheet lower service life and service life of imported films could reach 20 years do not change color.

Aluminum plate installation time and order

Kitchen, bathroom wall tile stickers out next steps on the installation of aluminium plate, stick out wall tiles can call the aluminum lining manufacturers agreed on the same day home ruler, called aluminum buckles the Board manufacturers will come one day after measurement, delivery after your feet 3-5 days can be installed.

Before you install the aluminum plate, you need to install the bath, exhaust fan (if wrapped in aluminum lining inside of the water heater also needs to be installed in advance). Fixed bath, fan, heater, best to use expansion bolts from coagulation directly fixed at the top, you can reduce the unwanted resonance. Upper hose fixed the range hood in the kitchen, the light just bought, does not need to be installed in advance.

Aluminum plate grade Division

For integrated ceiling aluminum plate aluminium materials are aluminum, there can be no pure aluminum. But due to the alloying content of different causing different mechanical properties of aluminum alloy, currently used for smallpox material of aluminum roughly divided into five classes:

First grade: aluminum magnesium alloy

Also contains part of the manganese, the biggest advantage of materials is a good antioxidant capacity, and because of the manganese content, so it has a certain strength and stiffness, is smallpox to be the ideal material. Southwest aluminum aluminum processing factory in the country's most stable performance.

Second grade: aluminium-manganese alloy

The material strength and stiffness than aluminum magnesium alloys. Antioxidant capacity is slightly lower than aluminum-magnesium alloy. Protective treatment on both sides, basically solved its antioxidant capacity as well as aluminum-magnesium alloy of shortcomings, the Rui min aluminum aluminum processing performance is the most stable.

Third grade: aluminum alloy

The alloy of manganese, magnesium content. Its strength and rigidity are significantly lower than that of Al-mg alloy and Al-MN alloy. Because of its soft, easy to machine and only reaches a certain thickness, can meet the most basic ceiling flatness requirements. But its antioxidant ability than aluminum-magnesium alloy and aluminium-manganese alloy. And processing, transport and install easily.

Grade IV: ordinary aluminum alloy

Mechanical properties of such materials is not too stable.

Class v: this plate of raw materials are aluminum processing plant will dissolve aluminum ingots into aluminum, chemical composition does not control. Due to the chemical composition of control, these materials are very unstable, and cause serious irregularities on the surface, deformation, and is easily oxidized.