*

It can bend the copper and aluminum busbars from 0 ° to 90 ° in the horizontal plane, and the time is only a few minutes. The machine can process the copper and aluminum busbars in vertical and horizontal bending direction. With a dial, easy to control the bending angle, the use of hinged flower board, opening and closing convenient, easy to operate, and with a variety of template, the use of quick-change top die structure, convenient, bend radius in line with national power company standards: R = row width x factor (2-2.5).

First, the structure
(6), a quick connector (2), a working cylinder (1), a square block (3), a flower board (4), a lower flower board (5) (10), a pin (11), a trolley (12), a high-pressure oil pipe (13) and the like, and is composed of R plate (7), clamping plate die (8)
Second, use
Bending machine is mainly applied to power supply bureau, substation and the majority of power lines installed by the power lines of aluminum or copper row of bending and repair.
Third, the performance characteristics:
Bent discharge force: 30T
Ping Li bending capacity: copper bus ≤ 125X10, aluminum bus ≤ 125X12.5
Bending bus angle: 0 ~ 90 ° Bend bus angle: 0 ~ 90 °
1. Maximum working pressure: 63Mpa2. Maximum stroke: 200mm
3. Curved row: copper and aluminum row width 40.50.60.80.100.120mm. Thickness: between 4mm-12mm.
4 Bending angle: D> 90 degrees arbitrary angle
5. Bending radius: R = row width X2.5
6. Oil varieties 16 # hydraulic oil
7. Fuel supply: 1L
8. Total weight: 82 kg