| Compact, high-precision drilling and milling systems. |
| |
| | Precision milling machine FF 230Milling head 360 ° rotation, indicating dial type. Height adjusted by handwheel with zero function l, milling can also be used when precision feed system (turning circle, equivalent to 1mm trip). Milling spindle and frame parts can be locked. Powerful motor with v-belt drive. Also at low speed high torque output. 6-8 and 10MM standard collets. Work surface with three 12 x 6 x 5mm MICROMOT standard t-slot. Other technical data: 220-240V, 140W, 50/60Hz. 280-550-870-1,200-1,500 spindle speed and 2,200rpm. Travel 30mm. Work table size 270 x 80mm. column 35 long x 400mm. X-y axis travel 170 x 65mm. maximum distance spindle nose to table surface 180mm, distance from spindle axis to column surface 130mm. Total height is approximately 500mm. Weight is approximately 17.0kg. NO 24 108 | | |
| | | Hand wheel and precision to the height can be adjusted. | | | Standard does not include precision, precision vise and remind the fixture. |
| | | V-belt drives in the 280 to 2,200rpm 6-speed. | | | Zero-scale adjustable handle (1 lap = 1.5mm, 1 tick = 0.05mm). |
| | | | | |
Precision feed system for FF 230 It only takes a few seconds to easily install. Feed system you can use the tilt in the vertical feed and feed. Scale wheel with 0 reset. Turning circle, equivalent to spindle 1.5mm (scale 1 = 0.05mm). NO 24 140 | | | |
Drill Chuck Width: 10MM, with keys and MK1 taper shank, 10MM Collet installed in the drilling and milling systems. . NO 24 110 | | | |
5 Chuck sleeve set A Collet each contains 2.4-3.0-3.2-4.0 and 5.0mm, used to clamp the milling cutter. Packaged in a wooden box with sliding. NO 24 144 | | | |
Steel trapezoidal plate Used to reliably fixed small parts (no more than 18 mm thickness). Each set consists of 2 trapezoidal blocks and plates, standard t-slot for MICROMOT (11.5 x 11 x 4mm)-bolt. Packaged in a wooden box with sliding. NO 24 256 | | | |
Steel trapezoidal plate 2 trapezoid pieces, 2 plates, 2 bolts and nuts, t-(B=7mm,E=12mm,D=4mm,C=7.2mm). 35mm for fixed thickness of the workpiece. packaged in a wooden box with sliding. NO 24 257 | | | |
Precision v-shaped jaw Used to hold the workpiece. Carbide steel processing, graphic precision milling. 4 different angular depth of v-block, is 90 °. Size 50 x 30 x 30mm. strong clamp and knurled knob ensures the workpiece firmly. Packaged in a wooden box with sliding. NO 24 262 2 sticks | | | |
Precision steel milling machine vise Side and back can be used. Clamping width 60mm, clamping range 42mm. together with the retaining bolt packed in a wooden box with sliding. NO 24 255 | | | |
3 sticks or Center drill High speed steel production. DIN 333 (type a) 60 °. A set of 2.0-2.5 and 3.15mm. NO 24 630 | | | |
Milling cutter set (2-5mm) All milling shank diameter is 6mm. Milling cutter diameter up to ø 2-3-4 and 5mm. DIN 327 standard two-slot milling cutter. HSS production. packaged in a wooden box with sliding. NO 24 610 | | | |
Milling cutter set (6-10MM) Include the diameter ø 6-7-8 and 10MM milling cutter 4. DIN 844 standard four-slot milling cutter. 6.0 and 10.0mm two handle. HSS production. Packaged in a wooden box with sliding. NO 24 620 | | | |
Edge Group For precisely machining on milling machine devices, central location. Size 6 x 6 x 5 and 6 x 50mm x 75mm. perfectly packaged in a wooden box. NO 24 434 | | | |
Set of 14 parallel rule Pairs using a lathe, milling machine, drilling machine at work to adjust the level. Making high-alloy hardened and tempered steel (58-62 HRC). Parallel 0.002mm. 8 x 10, 15, 20, 25, 30, 35 and 40mm the two. 100mm. Packaged in a wooden box. NO 24 266 | | | |
For TA 230 for PF 230 of the dividing head Help machining of gear teeth and a non-concentric workpiece. Provides two sets of the dividing plate (40 and 48), 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40 and 48 of the standard index. The Fujian spindle lathe PD 230/E is exactly the same. Three-jaw chucks and four-jaw chucks can be installed (Chuck is an optional attachment). Can be installed on cross platforms or on the saddle. Providing a wooden box with sliding storage. Described here are three-jaw chucks are not included in this annex. NO 24 131 | | | |
Self centering three-jaw Chuck (not described)With the same PD 230/E lathe Chuck as standard. Clamping width 2-68mm (anti-claw). Steel. Applies to the PD and 230/E lathe dividing head attachment TA 230. NO 24 028 | | | |
Cross table KT 230 (no description)As shown in the image above, remove the head and post. 35mm. Weight is approximately 11kg. NO 24 106 |
